Passionate Purple (RB04-HD) Vinyl Wrap€132,95
Our Gloss Metallic vinyl wrap has a smooth, high-gloss finish and is crafted from the high-grade polymeric multilayered calendared vinyl film, complete with air release channels. Gloss Metallic wrap is durable and has good conformability; it’s stretchable enough to easily wrap around every edge and recessed area of your vehicle. Gloss Metallic also uses a safe solvent polyacrylate adhesive, easy to install, and is gentle on car paint.
Conformable polymeric material with stable color pigments. Suitable for full car wrapping (or any other smooth or curved surface).
The thickness of the film(um): 122
The thickness of the release liner(um): 142
Note: Products that have "HD" letters in their SKU (product code) are with the plastic release liner (high-gloss films)
Type of film: High-grade polymeric multilayered calendared vinyl film with air-release channels
Width & Length: Standard roll size - 1.52m*18m (59.8"* 708,6", 4.98ft*59ft, 1.66yd* 19,6yd)
Series: 190 series
Adhesive: Henkel solvent-based acrylic adhesive, transparent, ultra-weather-resistant, viscosity 1000~3000cps, thickness 12 μm dry
Storing period (shelf life): 2 years if stored at +10°C to +20°C, with a relative humidity of 50%, in the original package, away from direct sunlight, clean and dry place
Durability/Warranty: Datasheet (Click the link)
Application: from +17°C to +18°C, usage from -45°C to +45°C
Release force (N/25mm): Standart: 0.10-0.30, Result:0,17 (23℃,54%H)
Initial Tack(g/25mm): Testing method: GB31125-2014: Standart 800-1500, Result: 840 (23℃,54%H)
180° Peel strength (N/25mm): Testing Method: GB/T2792-1998: Standart ≥6.8, Result: 8,7 (23℃,54%H)
Adhesion strength: Testing method: GB/T4851-1998, Standart ≥60, Result 70 (No shifting)
Aging (65℃, seven days): Standart - High-temperature release without adhesive residue, result: no adhesive residue
Aging (-65℃, ten days): Standart - Low-temperature release without adhesive residue, result: no adhesive residue
Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, IRR heater
Application method: Standard methods for calendered films. No overstretching. Post heating
Post-heating temperature: 100°C
Cure time: 24 hours above 10°C
Aftercare: PH neutral, Avoid wax or solvents
Tools: soft squeegees with buffers
The protective cap should be peeled off before installation.
Important note: The screen's images, colors, and finishes are approximate. For the real representation of the product, always check the color swatch. Rolls from the same production LOT number should be used for completing a wrap job, as a slight batch-to-batch variation of color may occur. The film may scratch during the application or a day in and out use. The scratching of the film is not covered by the warranty.