SKU: CG23-HD-5M

Super Gloss Green Moss Green Vinyl Wrap (CG23-HD)

(8)
$400.00
Tax included Shipping calculated at checkout.

Description

TeckWrap CG23-HD Moss Green is a Top Coated Super Gloss vinyl wrap in soft, dusty sage moss with very low saturation, heavy grey content, and a warm olive base. The kind of muted, architectural green that OEM designers are pushing into production right now: calm, expensive, almost interior-design inspired rather than aggressive. 

This sits in the modern luxury earthy-neutral trend driving current Porsche, Defender, and G-Wagon custom builds. Best on adventure-luxury and SUV builds where the muted character does the most work: Mercedes G-Class, Land Rover Defender, Ford Bronco, Toyota Tacoma and Land Cruiser, Porsche Macan and Cayenne, BMW X5 and X7, Range Rover Velar, Audi Q8, Lexus LX. Less suited to bright sports coupes.

Close OEM color family: Toyota Lunar Rock, Porsche Olive/Chalk crossover, Audi District Green desaturated, Rivian-style muted adventure green.

Key attributes:

  • Super Gloss vinyl wrap, dusty sage moss with protective top coat
  • Polymeric hybrid film with air-release channels
  • Henkel solvent-based acrylic adhesive, transparent, removable
  • High-grade PET liner for smooth finish and adhesive protection
  • Conformable to curves, mirrors, and recessed panels
  • Safe removable adhesive, protects factory paint underneath

Features

Film construction

  • Film type: Premium polymeric hybrid with air-release channels and Super Gloss self-healing top coat
  • Film thickness: 110 µm
  • Liner thickness: 142 µm plastic
  • Adhesive: Henkel solvent-based acrylic, ultra-weather-resistant, viscosity 1000–3000 cps, 12 µm dry
  • Finish: Super Gloss self-healing Moss Green, non-directional
  • Top layer: PET protective layer (peel before heating)
  • Roll width: 152 cm (5 ft)
  • Full roll length: 18 m or 23 m

Performance

  • Release force: 0.18 N/25mm (standard 0.10–0.30)
  • Initial tack: 1015 g/25mm (standard 800–1500, GB31125-2014)
  • Peel strength (180°): 8.1 N/25mm (standard ≥4.9, GB/T2792-1998)
  • Adhesion strength: 70 (standard ≥60, no shifting, GB/T4851-1998)
  • Aging tested: -65°C to +65°C, no residue
  • Self-healing top coat reflows micro-scratches and swirl marks with heat
  • Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight

Warranty

Standard TeckWrap limited warranty. Scratches beyond the self-healing range not covered. Use same production LOT for color consistency across panels.

Application
  • Apply at +17°C to +23°C
  • Service range: -30°C to +45°C
  • Standard squeegee with soft buffer
  • Conformability: smooth and medium-curved surfaces
  • Post-heat: 95°C
  • Cure: 24 hrs (48 hrs recommended)
  • Overlap: 3–4 mm
  • Non-directional film, flexible panel orientation
  • Remove PET protective cap before heating
  • For deeper scratches, apply gentle heat from a heat gun to activate the self-healing top coat

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of products for their purpose.

TeckWrap products are warranted to be free of defects in material for the period of shelf life. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.

Warranty does not cover normal wear, transportation, labor, or consequential damages.

The self-healing top coat reflows surface micro-scratches and swirl marks with heat. Deep cuts, abrasions, and impact damage are not self-healing and are not covered under warranty. Film must be stored without the protective layer to prevent tunneling. Screen images may vary, refer to physical color swatches. Use same production LOT for color consistency.

Valuable Advices

View all
  • How To Wrap Taillights

    How To Wrap Taillights

    Wrapping your taillights with a tint PPF is one of the simplest upgrades you can make to give your car a bold, smoky look. This step-by-step guide covers everything, from...

    E. Adnan |

  • Common Mistakes When Applying Color PPF

    Common Mistakes When Applying Color PPF

    Applying color paint protection film (PPF) can be tricky, and mistakes during the installation process can lead to bubbles, creases, and poor adhesion. Learn about the 5 most common color...

    E. Adnan |

  • When to Use Adhesive Promoters and Tack Reducers?

    When to Use Adhesive Promoters and Tack Reducers?

    Installing a car wrap isn’t just about applying vinyl—it requires skill, precision, and the right supporting products. Adhesive promoters help strengthen vinyl grip on tricky edges and curves, while tack...

    Nicki Ammelung |

  • Common Causes of Vinyl Adhesion Failure

    Common Causes of Vinyl Adhesion Failure

    Avoid Car Wrap Lifting & Peeling – Get a Flawless Finish Every TimeDIY vinyl wrapping can be challenging, and adhesion failure is one of the most common issues. From poor...

    Shukhrat Ismatov |

  • Wrapping a Rusty Car: Is It Possible?

    Wrapping a Rusty Car: Is It Possible?

    Car wrapping has exploded in popularity, offering a dynamic way to personalize vehicles. But what happens when the canvas isn't pristine? Can you successfully wrap a car with rust or...

    Phyllis Li |

  • How to Wrap a Car in Winter Time

    How to Wrap a Car in Winter Time

    Wrapping a car in vinyl during winter can be challenging due to cold temperatures, but with the right preparation and tools, you can still achieve a professional finish. Work in...

    Vasile Sayfutdin |