SKU: GAL01R-HD-5M

Ultra Gloss True Blood Vinyl Wrap (GAL01R-HD)

(36)
$404.00
Tax included Shipping calculated at checkout.

Description

Most bright reds turn orange under direct sun and fade to pink after a year on the road. TeckWrap Ultra Gloss True Blood stays deep, wet, electric crimson in sunlight, shade, and over time.

KEY ATTRIBUTES

  • Gloss that fights flat red: ultra-gloss candy scarlet with silver metallic undertone. Stays reflective, not plastic-looking
  • Film that does the work: polymeric multilayered hybrid film with silver metallic pigment. Delivers mirror-depth shine without a topcoat
  • Adhesive you can trust: Henkel solvent polyacrylate. Transparent, weatherproof, and removable. Air-release channels kill bubbles before they start
  • Built to last: UV, scratch, and weather resistant. The red you buy is the red it keeps
  • Installer's film: stretches into complex curves, conforms around mirrors, and repositions without lift or crease

True Blood runs pure candy scarlet with almost no brown or burgundy. Direct sun lifts it to glowing candy red. Evening light turns it cherry-metallic. Shadows deepen it to blood red. It never goes wine or brown, just pure, energetic performance red in every light.

OEM MATCH

  • Closest to Ferrari Rosso Corsa Metallic
  • Same saturation as Chevrolet Corvette Torch Red True Blood runs slightly deeper
  • Sportier than Mazda Soul Red Crystal Metallic
  • Less orange than BMW San Marino Red
  • Similar candy brightness to Honda Curva Red, cleaner and less pink

Want that Ferrari Rosso Corsa look without the factory respray? Wrap your R35, M4, LC500, or any build in TeckWrap Ultra Gloss True Blood.

Features

Film construction

  • Film type: Advanced polymeric multilayered film with silver coating and air-release channels
  • Film thickness: 132 μm
  • Liner thickness: 180 μm (plastic high-gloss liner)
  • Adhesive: Henkel solvent polyacrylate, transparent, ultra weather-resistant, viscosity 1000–3000 cps, 12 μm dry
  • Finish: High-Gloss aluminum metallic, directional
  • Roll width: 1.52 m (5 ft)
  • Roll length: 18 m (59 ft)

Performance

  • Service temperature: -35°C to +35°C
  • 180° Peel strength: 9.7 N/25mm (standard ≥7.85)
  • Initial tack: 1055 g/25mm (standard 800–1500)
  • Release force: 0.1 N/25mm (standard 0.10–0.30)
  • Adhesion: 70 (standard ≥60, no shifting)
  • Aging tested: -65°C to +65°C, no residue
  • Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight.

Warranty

  • Built for long-term outdoor use, up to 3 years outdoor durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Heat-removable, with minimal adhesive residue when removed within the recommended three years.

Application
  • Apply at +17°C to +23°C
  • Tools: soft squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer, IR heater
  • Directional film. Orient all panels in the same direction for a consistent metallic flake appearance
  • Conformability: flat, curved, and recessed surfaces (do not overstretch)
  • Post-heat: 100°C flat surfaces, 120°C curves and overlaps
  • Cure time: 24 hours above 15°C; 48 hours at room temperature recommended for maximum adhesive activation
  • A steam vacuum or an IR heater is recommended for installation
  • Remove the protective cap before installing
  • Aftercare: pH-neutral products only, avoid hot wax or strong solvents

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of the products for their purpose.
TeckWrap products are warranted to be free of defects in materials for the shelf life period. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.
Warranty does not cover normal wear, transportation, labor, or consequential damages.
Screen images may vary; refer to physical color swatches. Use the same production LOT for color consistency. Film must be stored without the protective layer to prevent tunneling. Scratches during application or daily use are not covered.

Valuable Advices

View all
  • How To Wrap Taillights

    How To Wrap Taillights

    Wrapping your taillights with a tint PPF is one of the simplest upgrades you can make to give your car a bold, smoky look. This step-by-step guide covers everything, from...

    E. Adnan |

  • Common Mistakes When Applying Color PPF

    Common Mistakes When Applying Color PPF

    Applying color paint protection film (PPF) can be tricky, and mistakes during the installation process can lead to bubbles, creases, and poor adhesion. Learn about the 5 most common color...

    E. Adnan |

  • When to Use Adhesive Promoters and Tack Reducers?

    When to Use Adhesive Promoters and Tack Reducers?

    Installing a car wrap isn’t just about applying vinyl—it requires skill, precision, and the right supporting products. Adhesive promoters help strengthen vinyl grip on tricky edges and curves, while tack...

    Nicki Ammelung |

  • Common Causes of Vinyl Adhesion Failure

    Common Causes of Vinyl Adhesion Failure

    Avoid Car Wrap Lifting & Peeling – Get a Flawless Finish Every TimeDIY vinyl wrapping can be challenging, and adhesion failure is one of the most common issues. From poor...

    Shukhrat Ismatov |

  • Wrapping a Rusty Car: Is It Possible?

    Wrapping a Rusty Car: Is It Possible?

    Car wrapping has exploded in popularity, offering a dynamic way to personalize vehicles. But what happens when the canvas isn't pristine? Can you successfully wrap a car with rust or...

    Phyllis Li |

  • How to Wrap a Car in Winter Time

    How to Wrap a Car in Winter Time

    Wrapping a car in vinyl during winter can be challenging due to cold temperatures, but with the right preparation and tools, you can still achieve a professional finish. Work in...

    Vasile Sayfutdin |