A complete guide to Knifeless Tape
Knifeless Tape is an excellent tool for vinyl film wrapping, especially on tricky sections. But if you do not know the correct way to use it, it will not work...
How to install vinyl wrap
-
-
Make adaptable overlap to achieve perfect finish
To wrap up a vehicle section in one piece of vinyl wrap film can be very challenging sometimes. Even if you manage to do it in the end, the quality...
-
Safe way to wrap up roof with gaps with vinyl wrap film
For many vehicles, especially those with racks, there are moldings on the roof located on top of the driver side and the passenger side. It is usually not hard to...
-
Quick and safe: Save backing paper for your next vinyl wrap install
A backing paper of a vinyl wrap film often gets thrown away straight after an install is finished. But if you can save it for your next project, it is...
-
Same vinyl wrapping techniques for sections with similar structure
When wrapping a vehicle with vinyl wrap film, it is helpful to separate the body of a car into different sections, which will help you understand better in terms of...
-
Easy application: Cut vinyl wrap film
Vinyl wrap film can be developed into a pre-cut format like text or different shapes. It can be used in numerous ways, including but not limited to business and decoration....
-
Wrap up hood with aggressive vinyl wrap film by yourself
Oftentimes, an installer has to wrap up a vehicle with vinyl wrap film all by themselves due to a lack of hands in the workspace. And it becomes challenging when...
-
Pre-production tips for full print vinyl wrap film
Full print vinyl wrap film is an excellent medium to express yourself or bring a message to the world. The install process is not much different from wrapping with a...
-
Wrapping bumper with several raised objects
There is a lot to consider when wrapping a bumper with vinyl wrap film. Recessed areas can be one kind of challenge. Besides them, there can be tricky raised objects...
-
Choose right angle to hold your blade when cutting
When wrapping with vinyl wrap film, it is crucial to hold the blade at the right angle to achieve the best result. Sometimes it should be held at a 45-degree...
-
Wrap around hardware with high efficiency
When wrapping around hardware with vinyl wrap film, installers tend to wrap farther as they remove the parts like lights or mirrors. But how far is enough to achieve full...
-
Wrapping Back Bumper in Two Pieces for Long-Durability
It is common for the top area of a back bumper to get scratches or even damages due to frequent contacts because of the usage of the trunk. Thus, it...
-
How to Wrap Symmetrically on Recessed Area
For recessed area wrapping, it is common for wrappers to bridge the vinyl wrap film on the flat section over this area. However, it might lead to distortion if you...
