When wrapping certain sections on a vehicle with vinyl wrap film, it gets challenging as you need to remove the excess material, especially when you are working on a color change project. For example,...
Car wrap tips
When wrapping a door for a color change project, installers would mostly cut on the side of the door to get just enough extra material to wrap around the inside contour. But when you...
Mostly, there is a gap under each headlight of a vehicle, which can be tricky to get fully covered when wrapping. Some installers would bridge the vinyl wrap film over this gap, and cut on...
Overlap made with Knifeless Tape plays an essential role in vinyl film wrapping, especially on a curvy section. For example, the top area of a back bumper, which connects to the trunk. You would go...
There are many precut vinyl stripes available out there in the market, which are very convenient for partial vinyl wrapping projects. But when you have to apply it to a curvy section, it becomes frustrating,...
Knifeless Tape is an excellent tool for vinyl film wrapping, especially on tricky sections. But if you do not know the correct way to use it, it will not work as you expected. Here is...
For most vehicles, the model will be presented somewhere on the car in the form of emblems. And it is very energy-consuming to wrap around this area with vinyl wrap film. If it is...
For many vehicles, especially those with racks, there are moldings on the roof located on top of the driver side and the passenger side. It is usually not hard to remove the moldings and racks....
- 1
- 2