SKU: ECH19-18M

Satin Forest Green Vinyl Wrap (ECH19)

Dhs. 1,495.00 Dhs. 2,320.00
Shipping calculated at checkout.

Description

With a collection of 15 fancy colors, TeckWrap offers you this series of matte metallic vinyl wraps that give your vehicle a subtle look of metallic steel with a flat finish. As a proud supplier, TeckWrap has plenty of film selections with good conformability and durability. The material is stretchable enough to wrap every edge and recessed area easily. And the adhesive is safe without giving you any trouble when uninstalling. The better thing is that these vinyl wraps from TeckWrap are all high quality but at reasonable and affordable prices.

Specifications

Conformable and reliable multilayered polymeric material with stable color pigments. Suitable for full car wrapping (or any other smooth or curved surface).

  • The thickness of the film (um): 121
  • The thickness of the release liner (um): 180
  • Type of film: High-grade polymeric calendared vinyl film with air-release channels 
  • Colors: Satin Pearl White, Gunsmoke Grey, Charcoal Grey, Royal Bronze, Nutmeg Brown, Persian Blue, Salmon Red, Navy Black, Hornet, Bond Gold, Oxford Blue, Forest Green, Metal Silver, Dark Platinum
  • Series: 190 series
  • Adhesive: Henkel solvent-based acrylic adhesive, transparent, ultra-weather-resistant, viscosity 1000~3000cps, thickness 12 μm dry
  • Release liner: Felix Schoeller Release Liner / 20-104-20-1,9 printed, double side PE coated Kraft. (ISO 9001, ISO 140001, OHSAS 18001)
  • Storing period: 3 years if stored at +10°C to +20°C for optimal quality, relative humidity 50%, in original package, away from direct sunlight, clean and dry place.
  • Durability/Warranty: Datasheet (Click the link)
  • Release force (N/25mm): Standart: 0.04-0.12, Result:0,1 (23℃,54%H)
  • Initial Tack(g/25mm): Testing method: GB31125-2014: Standart 800-1500, Result: 1254 (23℃,54%H)
  • 180° Peel strength (N/25mm): Testing Method: GB/T2792-1998: Standart ≥7.85, Result: 11,17  (23℃,54%H)
  • Adhesion strength: Testing method: GB/T4851-1998, Standart ≥60, Result 70 (No shifting)
  • Post heating: 100 Celcius
    Aging (65℃, seven days):     Standart - High-temperature release without adhesive residue, result: no adhesive residue
  • Aging (-65℃, ten days):  Standart - Low-temperature release without adhesive residue, result: no adhesive residue

Install tips:

  • Application: +17°C-18°C, usage from -45°C to +45°C
  • Tools: soft squeegee with buffer
  • Conformability: flat and moderate curves. Deep recesses with inlays
  • Directional: yes
  • Overlap width: 4-5mm
  • Package:  Roll width 152 cm, length 18 m

Important note: The screen's images, colors, and finishes are approximate. For the real representation of the product, always check the color swatch. Rolls from the same production LOT number should be used for completing a wrap job, as a slight batch-to-batch variation of color may occur. The film may scratch during the application or a day in and out use. The scratching of the film is not covered by the warranty.

Features

Film construction

  • Film type: high-grade polymeric calendered vinyl with air-release channels
  • Series: 190 Series
  • Film thickness: 121 μm
  • Release liner thickness: 180 μm
  • Material: conformable polymeric vinyl with a flat matte metallic finish
  • Adhesive: Henkel solvent-based acrylic adhesive, transparent, ultra weather resistant, 1000 to 3000 cps viscosity, 12 μm dry thickness

Performance

  • Service temperature: -35°C to +35°C
  • Release force: 0.1 N/25mm (standard 0.04 to 0.12)
  • Initial tack: 1254 g/25mm (standard 800 to 1500)
  • Peel strength (180°): 11.17 N/25mm (standard ≥ 7.85)
  • Adhesion strength: 70 (standard ≥ 60, no shifting)
  • High temperature aging (65°C, 7 days): no adhesive residue
  • Low temperature aging (-65°C, 10 days): no adhesive residue

Warranty

  • With proper care and a ceramic coating, this matte metallic finish offers up to 3 years of outdoor durability on vertical panels and around 2 year across a full wrap, depending on climate zone.
  • It is more delicate than gloss, and parking indoors or under cover extends its life. Heat-removable, with minimal adhesive residue when removed within the recommended period.

Application
  • Application temperature +17°C to +23°C
  • Tools: soft squeegee with buffer
  • Conformability: flat and moderate curves, deep recesses with inlays
  • Post-heat: 100°C
  • Cure: 24 hrs above 10°C, 48 hrs at room temperature recommended
  • Overlap: 4 to 5 mm
  • Directional film, check orientation before cutting
  • Avoid overstretching during application
  • Remove protective cap before install

Care and maintenance

  • This is a flat matte metallic finish and it needs more care than a gloss or satin wrap. Outdoor durability is shorter than gloss and satin and depends heavily on climate, washing habits, and whether the vehicle is kept indoors. Parking under cover meaningfully extends the finish.
  • Wait 48 hours after installation before the first wash so the adhesive can fully set.
  • Hand wash only, using a pH-neutral shampoo (pH 3 to 11) and a clean microfiber mitt. Rinse grit away first, wash gently, then dry with a clean microfiber towel.
  • Avoid automatic car washes, brushes, abrasive pads, and high-pressure washers. All of these mark a matte surface.
  • Never use waxes, polishes, gloss enhancers, or any product containing solvents or petroleum distillates. These raise the sheen unevenly, dull the matte, and can permanently degrade the film.
  • A vinyl-safe, matte-compatible ceramic coating is recommended for added protection and easier cleaning. Standard gloss coatings will change a matte finish, so use a matte-rated product. Aftermarket coatings are applied at the owner's discretion and any coating-related damage is not covered.
  • Spot-clean fingerprints, fuel, bird droppings, and tree sap as soon as
    possible. The longer they sit, the more likely they stain.
  • Always test any cleaner or coating in a hidden area before treating the whole vehicle.

Disclaimer
  • All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of products for their purpose.
  • TeckWrap products are warranted to be free of defects in material for the period of shelf life. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.
  • Warranty does not cover normal wear, transportation, labor, or consequential damages.
  • Screen images may vary, refer to physical color swatches. Use same production LOT for color consistency. Scratches during application or daily use are not covered.

Valuable Advices

View all
  • How To Wrap Taillights

    How To Wrap Taillights

    Wrapping your taillights with a tint PPF is one of the simplest upgrades you can make to give your car a bold, smoky look. This step-by-step guide covers everything, from...

    E. Adnan |

  • Common Mistakes When Applying Color PPF

    Common Mistakes When Applying Color PPF

    Applying color paint protection film (PPF) can be tricky, and mistakes during the installation process can lead to bubbles, creases, and poor adhesion. Learn about the 5 most common color...

    E. Adnan |

  • When to Use Adhesive Promoters and Tack Reducers?

    When to Use Adhesive Promoters and Tack Reducers?

    Installing a car wrap isn’t just about applying vinyl—it requires skill, precision, and the right supporting products. Adhesive promoters help strengthen vinyl grip on tricky edges and curves, while tack...

    Nicki Ammelung |

  • Common Causes of Vinyl Adhesion Failure

    Common Causes of Vinyl Adhesion Failure

    Avoid Car Wrap Lifting & Peeling – Get a Flawless Finish Every TimeDIY vinyl wrapping can be challenging, and adhesion failure is one of the most common issues. From poor...

    Shukhrat Ismatov |

  • Wrapping a Rusty Car: Is It Possible?

    Wrapping a Rusty Car: Is It Possible?

    Car wrapping has exploded in popularity, offering a dynamic way to personalize vehicles. But what happens when the canvas isn't pristine? Can you successfully wrap a car with rust or...

    Phyllis Li |

  • How to Wrap a Car in Winter Time

    How to Wrap a Car in Winter Time

    Wrapping a car in vinyl during winter can be challenging due to cold temperatures, but with the right preparation and tools, you can still achieve a professional finish. Work in...

    Vasile Sayfutdin |