SKU: CG59-HD-5M

High Gloss Sorbet Pink Vinyl Wrap (CG59-HD)

(1)
2,181.00 dh
Shipping calculated at checkout.

Description

Bright pinks usually go one of two ways, pastel and forgettable, or neon and cheap-looking. TeckWrap High Gloss Sorbet Pink keeps its rich raspberry-magenta tone alive with a wet gloss that grows deeper as the light changes. 

Key Attributes

  • Candy-coated depth: vibrant raspberry-magenta with fine metallic pigment creates a glossy finish that stays rich instead of looking synthetic. 
  • Structured shine: polymeric multilayered hybrid film carries the metallic pigment through the surface, so the color holds dimension instead of sitting flat like a print.
  • Weatherproof hold: Henkel solvent acrylic adhesive stays transparent through rain and heat, then peels off without leaving residue.
  • Air-release technology: built-in air-release channels guide trapped air away for cleaner positioning across large panels.
  • Contour flexibility: wraps confidently around mirrors, bumpers, curves, and recessed sections with controlled heat. 
  • Factory paint friendly: removable adhesive lifts away cleanly and helps preserve the original clear coat.  

Sorbet Pink changes character throughout the day. Direct sun brings out a juicy raspberry tone, evening light leans toward electric magenta, and wet pavement gives it a richer, almost neon glow that reflects like fresh enamel. It carries the look of pop-art colors while keeping enough depth to suit modern builds, retro icons, and attention-grabbing project cars alike. 

OEM Match

  • Closest to Porsche Ruby Star Neo (718 / 911).
  • Brighter than Fiat 500 Rosa.
  • Deeper than Vespa's pastel pink scooter finishes. 

Sorbet Pink isn't meant to disappear into traffic. It gives bold projects a color that stays memorable long after the drive is over. 

Features

Film Construction

  • Film Type: Premium polymeric hybrid with air-release channels and Super Gloss HD finish
  • Film Thickness: 0.14 mm
  • Release Liner Thickness: 0.03 mm
  • Backing Liner Thickness: 0.13 mm
  • Total Thickness (with liner): 0.30 mm
  • Liner Thickness: 142 µm plastic (HD high-gloss)
  • Adhesive: Henkel solvent-based acrylic, ultra-weather-resistant, viscosity 1000–3000 cps, 12 µm dry
  • Top Layer: PET protective layer (peel before heating)
  • Roll Width: 5 ft (1.52 m)
  • Full Roll Length: 59 ft (18 m)

Performance

  • Service temperature: -35°C to +35°C
  • Release force: 0.18 N/25mm (standard 0.10–0.30)
  • Initial tack: 1015 g/25mm (standard 800–1500, GB31125-2014)
  • Peel strength (180°): 8.1 N/25mm (standard ≥4.9, GB/T2792-1998)
  • Adhesion strength: 70 (standard ≥60, no shifting, GB/T4851-1998)
  • Aging tested: -65°C to +65°C, no residue
  • Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight.

Warranty

  • Built for long-term outdoor use, up to 3 years outdoor durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Heat-removable, with minimal adhesive residue when removed within the recommended three years.

Application
  • Application temperature: +17°C to +23°C
  • Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer, IR heater
  • Conformability: smooth and medium-curved surfaces
  • Post-heat: 95–100°C (gloss finish)
  • Cure: 24 hrs above 10°C (48 hrs at room temperature recommended)
  • Overlap: 3–4 mm
  • Non-directional film
  • Avoid overstretching during application
  • Remove the protective cap before installing
  • Aftercare: pH-neutral products only, avoid hot wax or strong solvents

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of the products for their purpose.


TeckWrap products are warranted to be free of defects in materials for the shelf life period. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.
Warranty does not cover normal wear, transportation, labor, or consequential damages.
Screen images may vary; refer to physical color swatches. Use the same production LOT for color consistency. Film must be stored without the protective layer to prevent tunneling. Scratches during application or daily use are not covered.

Valuable Advices

View all
  • DIY vs. Professional Window Tint Installation

    DIY vs. Professional Window Tint Installation

    Nothing changes a vehicle's personality quite like a dark smoky tint. But it can be expensive forcing you to choose between DIY installation and hiring a professional? DIY window tinting...

    E. Adnan |

  • How To Wrap Taillights

    How To Wrap Taillights

    Wrapping your taillights with a tint PPF is one of the simplest upgrades you can make to give your car a bold, smoky look. This step-by-step guide covers everything, from...

    E. Adnan |

  • Common Mistakes When Applying Color PPF

    Common Mistakes When Applying Color PPF

    Applying color paint protection film (PPF) can be tricky, and mistakes during the installation process can lead to bubbles, creases, and poor adhesion. Learn about the 5 most common color...

    E. Adnan |

  • When to Use Adhesive Promoters and Tack Reducers?

    When to Use Adhesive Promoters and Tack Reducers?

    Installing a car wrap isn’t just about applying vinyl—it requires skill, precision, and the right supporting products. Adhesive promoters help strengthen vinyl grip on tricky edges and curves, while tack...

    Nicki Ammelung |

  • Common Causes of Vinyl Adhesion Failure

    Common Causes of Vinyl Adhesion Failure

    Avoid Car Wrap Lifting & Peeling – Get a Flawless Finish Every TimeDIY vinyl wrapping can be challenging, and adhesion failure is one of the most common issues. From poor...

    Shukhrat Ismatov |

  • Wrapping a Rusty Car: Is It Possible?

    Wrapping a Rusty Car: Is It Possible?

    Car wrapping has exploded in popularity, offering a dynamic way to personalize vehicles. But what happens when the canvas isn't pristine? Can you successfully wrap a car with rust or...

    Phyllis Li |

  • How to Wrap a Car in Winter Time

    How to Wrap a Car in Winter Time

    Wrapping a car in vinyl during winter can be challenging due to cold temperatures, but with the right preparation and tools, you can still achieve a professional finish. Work in...

    Vasile Sayfutdin |