SKU: RB32-HD-5M

Deep Gloss Metallic Onyx Vinyl Wrap (RB32-HD)

(4)
2,148.00 dh
Shipping calculated at checkout.

Description

A graphite that hides green where every other dark grey turns cold and blue.

Key attributes:

  • Dark graphite metallic with a warm earthy edge and a hidden olive-green pearl
  • Multilayered polymeric hybrid construction with metallic pigment for sharp gloss and depth
  • Transparent Henkel solvent-based acrylic adhesive, weather-resistant and fully removable
  • PET release liner holds the film flat for a clean mirror-gloss finish, free of orange peel
  • Heat-stretchable across edges, mirrors, and moderate recessed areas
  • Lifts off cleanly later, your factory paint stays protected

At a glance Onyx reads as a deep neutral charcoal. Then the sun finds it and the warmth comes up, moss undertones, a touch of olive, an earthy graphite reflection that most gunmetals never show. The green never takes over. It stays buried in the base as a warmth rather than a color, which is exactly what gives it that expensive, OEM-natural look instead of a stylized chameleon trick.

The character sits like a darker Land Rover Silicon Grey with green pearl, close to a BMW Dravit Grey but cleaner and less bronze-heavy, with Honda Dark Olive Metallic as its closest real-world match. Smoky military luxury grey, the kind of muted premium tone Land Rover and Lexus build for their flagship SUVs.

It belongs on executive and luxury-SUV builds that want depth without flash: a Tesla Model S and Model 3, a Porsche Panamera and Taycan, a BMW M5, an Audi RS6 Avant and RS7, a Mercedes-Benz S-Class, a Land Rover Defender and Range Rover, a Lexus GX, an Aston Martin DBX, a Bentley Bentayga.

Features

Film construction

  • Film type: premium-grade polymeric multilayered hybrid vinyl with air-release channels
  • Film thickness: 122 μm
  • Release liner thickness: 142 μm plastic
  • Series: 190 Series
  • Roll size: 1.52 m × 18 m (59.8" × 708.6")
  • Material: conformable polymeric vinyl with stable color pigments
  • Adhesive: Henkel solvent-based acrylic adhesive, transparent and ultra weather resistant, 1000 to 3000 cps viscosity, 12 μm dry thickness

Performance

  • Service temperature: -35°C to +35°C
  • Release force: 0.17 N/25mm (standard 0.10 to 0.30)
  • Initial tack: 840 g/25mm (standard 800 to 1500)
  • Peel strength (180°): 8.7 N/25mm (standard ≥ 6.8)
  • Adhesion strength: 70 (standard ≥ 60, no shifting)
  • High temperature aging (65°C, 7 days): no adhesive residue
  • Low temperature aging (-65°C, 10 days): no adhesive residue

Warranty
Built for long-term outdoor use, up to 3 years outdoor durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Heat-removable, with minimal adhesive residue when removed within the recommended three years.

Application
  • Application temperature: +17°C to +23°C
  • Tools: squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer, IR heater
  • Conformability: smooth and medium-curved surfaces
  • Post-heat: 100°C
  • Cure: 24 hrs above 10°C (48 hrs at room temperature recommended)
  • Overlap: 3–4 mm
  • Directional film, check orientation before cutting
  • Avoid overstretching during application
  • Remove protective cap before install
  • Aftercare: pH-neutral products only, avoid waxes and harsh solvents

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of products for their purpose.

TeckWrap products are warranted to be free of defects in material for the period of shelf life. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.

Warranty does not cover normal wear, transportation, labor, or consequential damages.

Screen images may vary, refer to physical color swatches. Use same production LOT for color consistency. Scratches during application or daily use are not covered.

Valuable Advices

View all
  • How To Wrap Taillights

    How To Wrap Taillights

    Wrapping your taillights with a tint PPF is one of the simplest upgrades you can make to give your car a bold, smoky look. This step-by-step guide covers everything, from...

    E. Adnan |

  • Common Mistakes When Applying Color PPF

    Common Mistakes When Applying Color PPF

    Applying color paint protection film (PPF) can be tricky, and mistakes during the installation process can lead to bubbles, creases, and poor adhesion. Learn about the 5 most common color...

    E. Adnan |

  • When to Use Adhesive Promoters and Tack Reducers?

    When to Use Adhesive Promoters and Tack Reducers?

    Installing a car wrap isn’t just about applying vinyl—it requires skill, precision, and the right supporting products. Adhesive promoters help strengthen vinyl grip on tricky edges and curves, while tack...

    Nicki Ammelung |

  • Common Causes of Vinyl Adhesion Failure

    Common Causes of Vinyl Adhesion Failure

    Avoid Car Wrap Lifting & Peeling – Get a Flawless Finish Every TimeDIY vinyl wrapping can be challenging, and adhesion failure is one of the most common issues. From poor...

    Shukhrat Ismatov |

  • Wrapping a Rusty Car: Is It Possible?

    Wrapping a Rusty Car: Is It Possible?

    Car wrapping has exploded in popularity, offering a dynamic way to personalize vehicles. But what happens when the canvas isn't pristine? Can you successfully wrap a car with rust or...

    Phyllis Li |

  • How to Wrap a Car in Winter Time

    How to Wrap a Car in Winter Time

    Wrapping a car in vinyl during winter can be challenging due to cold temperatures, but with the right preparation and tools, you can still achieve a professional finish. Work in...

    Vasile Sayfutdin |