SKU: RB28-HD-5M

Vibrant Gloss Nickel Vinyl Wrap (RB28-HD)

(1)
₩353,000
Shipping calculated at checkout.

Description

TeckWrap Vibrant Nickel is perfect for the sophisticated. It has a low-profile look with a sense of luxury. Don’t miss this color if you want something simple yet classic.

Our Gloss Metallic vinyl wrap has a smooth, high-gloss finish and is crafted from the high-grade polymeric multilayered calendared vinyl film, complete with air release channels. Gloss Metallic wrap is durable and has good conformability; it's stretchable enough to quickly wrap around every edge and recessed area of your vehicle. Gloss Metallic also uses a safe solvent polyacrylate adhesive, easy to install, and is gentle on car paint. 

Specifications 

Conformable polymeric material with stable color pigments. Suitable for complete car wrapping (or any other smooth or curved surface). 

The thickness of the film(um): 122
The thickness of the release liner(um): 142

Note: Products that have "HD" letters in their SKU (product code) are with the plastic release liner (high-gloss films)

Type of film: Premium-grade polymeric multilayered hybrid vinyl film with air-release channels 

Width & Length: Standard roll size - 1.52m*18m (59.8"* 708,6", 4.98ft*59ft, 1.66yd* 19,6yd)

Adhesive: Henkel solvent-based acrylic adhesive, transparent, ultra-weather-resistant, viscosity 1000~3000cps, thickness 12 μm dry
001)

Storing period (shelf life): 2 years if stored at +10°C to +20°C, with a relative humidity of 50%, in the original package, away from direct sunlight, clean and dry place

Durability/Warranty: Datasheet (Click the link)

Application: from +17°C to +18°C, usage from -45°C to +45°C

Release force (N/25mm): Standart: 0.10-0.30, Result:0,17 (23℃,54%H)

Initial Tack(g/25mm): Testing method: GB31125-2014: Standart 800-1500, Result: 840 (23℃,54%H)

180° Peel strength (N/25mm): Testing Method: GB/T2792-1998: Standart ≥6.8, Result: 8,7 (23℃,54%H)

Adhesion strength: Testing method: GB/T4851-1998, Standart ≥60, Result 70 (No shifting)

    Aging (65℃, seven days): Standart - High-temperature release without adhesive residue, result: no adhesive residue

    Aging (-65℃, ten days): Standart - Low-temperature release without adhesive residue, result: no adhesive residue

    Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, IRR heater

    Application method: Standard methods for calendered films. No overstretching. Post heating 

    Post-heating temperature: 90°C

    Cure time: 24 hours above ten °C

    Aftercare: PH neutral. Avoid wax or solvents

    Directional: Yes

    Tools: soft squeegees with buffers

     

    The protective cap should be peeled off before installation.

    Important note: The screen's images, colors, and finishes are approximate. For an accurate representation of the product, always check the color swatch. Rolls from the same production LOT number should be used for completing a wrap job, as a slight batch-to-batch variation of color may occur. The film may scratch during the application or a day in and out use. The warranty does not cover the scratching of the film.

    Features

    Film construction

    • Film type: premium-grade polymeric multilayered hybrid vinyl with air-release channels
    • Film thickness: 122 μm
    • Release liner thickness: 142 μm plastic
    • Series: 190 Series
    • Roll size: 1.52 m × 18 m (59.8" × 708.6")
    • Material: conformable polymeric vinyl with stable color pigments
    • Adhesive: Henkel solvent-based acrylic adhesive, transparent and ultra weather resistant, 1000 to 3000 cps viscosity, 12 μm dry thickness

    Performance

    • Service temperature: -35°C to +35°C
    • Release force: 0.17 N/25mm (standard 0.10 to 0.30)
    • Initial tack: 840 g/25mm (standard 800 to 1500)
    • Peel strength (180°): 8.7 N/25mm (standard ≥ 6.8)
    • Adhesion strength: 70 (standard ≥ 60, no shifting)
    • High temperature aging (65°C, 7 days): no adhesive residue
    • Low temperature aging (-65°C, 10 days): no adhesive residue

    Warranty
    Built for long-term outdoor use, up to 3 years outdoor durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Heat-removable, with minimal adhesive residue when removed within the recommended three years.

    Application
    • Application temperature: +17°C to +23°C
    • Tools: squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer, IR heater
    • Conformability: smooth and medium-curved surfaces
    • Post-heat: 100°C
    • Cure: 24 hrs above 10°C (48 hrs at room temperature recommended)
    • Overlap: 3–4 mm
    • Directional film, check orientation before cutting
    • Avoid overstretching during application
    • Remove protective cap before install
    • Aftercare: pH-neutral products only, avoid waxes and harsh solvents

    Disclaimer

    All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of products for their purpose.

    TeckWrap products are warranted to be free of defects in material for the period of shelf life. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.

    Warranty does not cover normal wear, transportation, labor, or consequential damages.

    Screen images may vary, refer to physical color swatches. Use same production LOT for color consistency. Scratches during application or daily use are not covered.

    Valuable Advices

    View all
    • How To Wrap Taillights

      How To Wrap Taillights

      Wrapping your taillights with a tint PPF is one of the simplest upgrades you can make to give your car a bold, smoky look. This step-by-step guide covers everything, from...

      E. Adnan |

    • Common Mistakes When Applying Color PPF

      Common Mistakes When Applying Color PPF

      Applying color paint protection film (PPF) can be tricky, and mistakes during the installation process can lead to bubbles, creases, and poor adhesion. Learn about the 5 most common color...

      E. Adnan |

    • When to Use Adhesive Promoters and Tack Reducers?

      When to Use Adhesive Promoters and Tack Reducers?

      Installing a car wrap isn’t just about applying vinyl—it requires skill, precision, and the right supporting products. Adhesive promoters help strengthen vinyl grip on tricky edges and curves, while tack...

      Nicki Ammelung |

    • Common Causes of Vinyl Adhesion Failure

      Common Causes of Vinyl Adhesion Failure

      Avoid Car Wrap Lifting & Peeling – Get a Flawless Finish Every TimeDIY vinyl wrapping can be challenging, and adhesion failure is one of the most common issues. From poor...

      Shukhrat Ismatov |

    • Wrapping a Rusty Car: Is It Possible?

      Wrapping a Rusty Car: Is It Possible?

      Car wrapping has exploded in popularity, offering a dynamic way to personalize vehicles. But what happens when the canvas isn't pristine? Can you successfully wrap a car with rust or...

      Phyllis Li |

    • How to Wrap a Car in Winter Time

      How to Wrap a Car in Winter Time

      Wrapping a car in vinyl during winter can be challenging due to cold temperatures, but with the right preparation and tools, you can still achieve a professional finish. Work in...

      Vasile Sayfutdin |