SKU: RB25-HD-5M

Gloss Gold Golden Yellow Vinyl Wrap (RB25-HD)

(2)
Rp 4.138.000,00
Shipping calculated at checkout.

Description

TeckWrap RB25-HD Golden Yellow is a Gloss Metallic vinyl wrap sitting between performance yellow and exotic metallic gold. The metallic reflection creates molten gold highlights, liquid citrus reflections, and a very energetic light response that flat yellow paint cannot match. A slight gold pearl effect, high gloss depth, warm but controlled saturation, and clean reflection behavior put this in supercar launch-edition territory rather than commercial yellow.

This is very different from TeckWrap's other yellows. Where CG12-HD Sunflower Yellow is warmer, softer, and more amber-orange, and CG44-HD Sunray Yellow is the classic mid-yellow, RB25-HD is cleaner, brighter, more metallic, and reads as supercar factory paint. Emotionally it sits between racing yellow, golden saffron, liquid mango, and metallic marigold. Best on halo performance and supercar builds where the metallic gold-yellow character earns its place: McLaren 720S, Lamborghini Huracán, Porsche 911 GT3 and Turbo, Chevrolet Corvette C8, Toyota Supra, BMW M4 and M8, Ferrari F8, Audi R8, Lotus Emira.

Close OEM color family: McLaren Volcano Yellow / Papaya, Lamborghini Giallo Orion with metallic warmth, Porsche Racing Yellow pushed toward golden metallic

Key attributes:

  • Gloss Metallic vinyl wrap, supercar yellow with molten gold highlights and metallic depth
  • Premium polymeric hybrid film with air-release channels
  • Henkel solvent-based acrylic adhesive, transparent, ultra-weather-resistant, removable
  • High-grade PET liner for smooth finish and adhesive protection
  • Conformable to curves, mirrors, and recessed panels
  • Safe removable adhesive, protects factory paint underneath

Features

Film construction

  • Film type: Premium-grade polymeric multilayered hybrid with air-release channels
  • Film thickness: 0.15 mm (150 µm)
  • Total thickness with liner: 0.31 mm
  • Liner: Felix Schoeller double-side PE-coated Kraft, solventless silicone coating, air-release (ISO 9001, ISO 14001, OHSAS 18001)
  • Adhesive: Henkel solvent-based acrylic, transparent, viscosity 1000–3000 cps, 12 µm dry
  • Finish: Gloss metallic, directional
  • Roll width: 152 cm (5 ft)
  • Full roll length: 18 m (59 ft)
  • Roll weight: 14 kg

Performance

  • Breaking strength: 22.7 N/10mm (ASTM D3759)
  • Peel strength: 7.4 N/10mm (ASTM D3330)
  • Dimensional stability: shrinkage less than 5% (gloss)
  • Plastification: 27%–35%
  • UV resistance: 5 Pass (ASTM D4329-13 Cycle A, ISO 105-A02)
  • UV test conditions: UVA-340, 8h UV at 60°C + 4h condensation at 50°C, 49h duration
  • Storage: 2 years at +10°C to +20°C, 50% RH, original packaging, dry

Warranty

Standard TeckWrap limited warranty. Scratches not covered. Use same production LOT for color consistency across panels.

Application
  • Apply at +17°C to +18°C
  • Service range: -45°C to +45°C
  • Standard squeegee with soft buffer
  • Conformability: smooth and medium-curved surfaces
  • Post-heat: 110°C
  • Cure: 24 hrs (48 hrs recommended)
  • Overlap: 3–4 mm
  • Directional film, check orientation before cutting
  • Remove protective cap before install

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of products for their purpose.

TeckWrap products are warranted to be free of defects in material for the period of shelf life. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.

Warranty does not cover normal wear, transportation, labor, or consequential damages.

Screen images may vary, refer to physical color swatches. Use same production LOT for color consistency. Scratches during application or daily use are not covered.

Valuable Advices

View all
  • How To Wrap Taillights

    How To Wrap Taillights

    Wrapping your taillights with a tint PPF is one of the simplest upgrades you can make to give your car a bold, smoky look. This step-by-step guide covers everything, from...

    E. Adnan |

  • Common Mistakes When Applying Color PPF

    Common Mistakes When Applying Color PPF

    Applying color paint protection film (PPF) can be tricky, and mistakes during the installation process can lead to bubbles, creases, and poor adhesion. Learn about the 5 most common color...

    E. Adnan |

  • When to Use Adhesive Promoters and Tack Reducers?

    When to Use Adhesive Promoters and Tack Reducers?

    Installing a car wrap isn’t just about applying vinyl—it requires skill, precision, and the right supporting products. Adhesive promoters help strengthen vinyl grip on tricky edges and curves, while tack...

    Nicki Ammelung |

  • Common Causes of Vinyl Adhesion Failure

    Common Causes of Vinyl Adhesion Failure

    Avoid Car Wrap Lifting & Peeling – Get a Flawless Finish Every TimeDIY vinyl wrapping can be challenging, and adhesion failure is one of the most common issues. From poor...

    Shukhrat Ismatov |

  • Wrapping a Rusty Car: Is It Possible?

    Wrapping a Rusty Car: Is It Possible?

    Car wrapping has exploded in popularity, offering a dynamic way to personalize vehicles. But what happens when the canvas isn't pristine? Can you successfully wrap a car with rust or...

    Phyllis Li |

  • How to Wrap a Car in Winter Time

    How to Wrap a Car in Winter Time

    Wrapping a car in vinyl during winter can be challenging due to cold temperatures, but with the right preparation and tools, you can still achieve a professional finish. Work in...

    Vasile Sayfutdin |