SKU: RB25-HD-5M

High Gloss Metallic Golden Yellow Vinyl Wrap (RB25-HD)

(2)
£174.00
Tax included Shipping calculated at checkout.

Description

TeckWrap RB25-HD Golden Yellow is a Gloss Metallic vinyl wrap sitting between performance yellow and exotic metallic gold. The metallic reflection creates molten gold highlights, liquid citrus reflections, and a very energetic light response that flat yellow paint cannot match. A slight gold pearl effect, high gloss depth, warm but controlled saturation, and clean reflection behavior put this in supercar launch-edition territory rather than commercial yellow.

This is very different from TeckWrap's other yellows. Where CG12-HD Sunflower Yellow is warmer, softer, and more amber-orange, and CG44-HD Sunray Yellow is the classic mid-yellow, RB25-HD is cleaner, brighter, more metallic, and reads as supercar factory paint. Emotionally it sits between racing yellow, golden saffron, liquid mango, and metallic marigold. Best on halo performance and supercar builds where the metallic gold-yellow character earns its place: McLaren 720S, Lamborghini Huracán, Porsche 911 GT3 and Turbo, Chevrolet Corvette C8, Toyota Supra, BMW M4 and M8, Ferrari F8, Audi R8, Lotus Emira.

Close OEM color family: McLaren Volcano Yellow / Papaya, Lamborghini Giallo Orion with metallic warmth, Porsche Racing Yellow pushed toward golden metallic

Key attributes:

  • Gloss Metallic vinyl wrap, supercar yellow with molten gold highlights and metallic depth
  • Premium polymeric hybrid film with air-release channels
  • Henkel solvent-based acrylic adhesive, transparent, ultra-weather-resistant, removable
  • High-grade PET liner for smooth finish and adhesive protection
  • Conformable to curves, mirrors, and recessed panels
  • Safe removable adhesive, protects factory paint underneath

Features

Film construction

  • Film type: premium-grade polymeric multilayered hybrid vinyl with air-release channels
  • Film thickness: 122 μm
  • Release liner thickness: 142 μm plastic
  • Series: 190 Series
  • Roll size: 1.52 m × 18 m (59.8" × 708.6")
  • Material: conformable polymeric vinyl with stable color pigments
  • Adhesive: Henkel solvent-based acrylic adhesive, transparent and ultra weather resistant, 1000 to 3000 cps viscosity, 12 μm dry thickness

Performance

  • Service temperature: -35°C to +35°C
  • Release force: 0.17 N/25mm (standard 0.10 to 0.30)
  • Initial tack: 840 g/25mm (standard 800 to 1500)
  • Peel strength (180°): 8.7 N/25mm (standard ≥ 6.8)
  • Adhesion strength: 70 (standard ≥ 60, no shifting)
  • High temperature aging (65°C, 7 days): no adhesive residue
  • Low temperature aging (-65°C, 10 days): no adhesive residue

Warranty
Built for long-term outdoor use, up to 3 years outdoor durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Heat-removable, with minimal adhesive residue when removed within the recommended three years.

Application
  • Application temperature: +17°C to +23°C
  • Tools: squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer, IR heater
  • Conformability: smooth and medium-curved surfaces
  • Post-heat: 100°C
  • Cure: 24 hrs above 10°C (48 hrs at room temperature recommended)
  • Overlap: 3–4 mm
  • Directional film, check orientation before cutting
  • Avoid overstretching during application
  • Remove protective cap before install
  • Aftercare: pH-neutral products only, avoid waxes and harsh solvents

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of products for their purpose.

TeckWrap products are warranted to be free of defects in material for the period of shelf life. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.

Warranty does not cover normal wear, transportation, labor, or consequential damages.

Screen images may vary, refer to physical color swatches. Use same production LOT for color consistency. Scratches during application or daily use are not covered.

Valuable Advices

View all
  • How To Wrap Taillights

    How To Wrap Taillights

    Wrapping your taillights with a tint PPF is one of the simplest upgrades you can make to give your car a bold, smoky look. This step-by-step guide covers everything, from...

    E. Adnan |

  • Common Mistakes When Applying Color PPF

    Common Mistakes When Applying Color PPF

    Applying color paint protection film (PPF) can be tricky, and mistakes during the installation process can lead to bubbles, creases, and poor adhesion. Learn about the 5 most common color...

    E. Adnan |

  • When to Use Adhesive Promoters and Tack Reducers?

    When to Use Adhesive Promoters and Tack Reducers?

    Installing a car wrap isn’t just about applying vinyl—it requires skill, precision, and the right supporting products. Adhesive promoters help strengthen vinyl grip on tricky edges and curves, while tack...

    Nicki Ammelung |

  • Common Causes of Vinyl Adhesion Failure

    Common Causes of Vinyl Adhesion Failure

    Avoid Car Wrap Lifting & Peeling – Get a Flawless Finish Every TimeDIY vinyl wrapping can be challenging, and adhesion failure is one of the most common issues. From poor...

    Shukhrat Ismatov |

  • Wrapping a Rusty Car: Is It Possible?

    Wrapping a Rusty Car: Is It Possible?

    Car wrapping has exploded in popularity, offering a dynamic way to personalize vehicles. But what happens when the canvas isn't pristine? Can you successfully wrap a car with rust or...

    Phyllis Li |

  • How to Wrap a Car in Winter Time

    How to Wrap a Car in Winter Time

    Wrapping a car in vinyl during winter can be challenging due to cold temperatures, but with the right preparation and tools, you can still achieve a professional finish. Work in...

    Vasile Sayfutdin |