SKU: ECH17-5M

Satin Bond Gold Vinyl Wrap (ECH17)

(7)
£159.00
Tax included Shipping calculated at checkout.

Description

Bond Gold is the darkest and most dramatic of TeckWrap's gold family. Rather than staying gold throughout, the base shifts hard with the angle. Parked in shadow or lit from above, it reads as a deep, almost black olive bronze, and only turns to warm champagne gold where direct light hits the panel head on.

This kind of flop, shifting from near black to gold depending on the light angle, is the same effect Porsche's factory Dark Olive Metallic is known for, though that color usually needs a six figure Turbo S to access it. Next to Golden Yellow's steadier brass and Hornet Yellow's warm amber, Bond Gold is the moodiest and most secretive of the three, reading like a sophisticated finish more than a bright one.

Key Attributes

  • Dramatic flop effect: shifts from near black olive bronze in shadow to warm champagne gold in direct light.
  • Darkest of the house's golds: moodier and more secretive than Golden Yellow or Hornet Yellow.
  • Large, coarse metallic flake: creates the dramatic light shift rather than a flat, even sparkle.
  • Weatherproof adhesion: Henkel solvent based acrylic adhesive, ultra weather resistant, removes without residue.
  • Smooth installation: high grade calendered vinyl with air release channels lays down without bubbling.

OEM Match

  • Same dramatic black to gold flop effect as Porsche's factory Dark Olive Metallic, usually only available as a costly factory option.
  • Shares the shifting character of automotive chameleon and flop paint finishes generally, without the show car price tag.

It's the gold that looks like it's hiding something, which is probably the point of the name.

Specifications:

  • Film Type: High-grade polymeric calendared vinyl with air-release channels
    Series: 190 Series
  • Total Film Thickness: 0.32 mm
  • Film Thickness: 121 µm
  • Release Liner Thickness: 0.18 mm

Adhesive & Liner:

  • Adhesive: Henkel solvent-based acrylic, transparent, ultra-weather-resistant, viscosity 1000–3000 cps, thickness 12 µm dry
  • Release Liner: Felix Schoeller Release Liner / 20-104-20-1.9 printed, double-side PE-coated Kraft (ISO 9001, ISO 14001, OHSAS 18001)
  • Storage: +10°C to +20°C, 50% relative humidity, in original packaging, away from direct sunlight; shelf life: 3 years
  • Durability/Warranty: Click here for TeckWrap Datasheet

Performance & Material Properties:

  • Release Force (N/25mm): Standard 0.04–0.12, Result: 0.1 (23℃, 54% RH)
  • Initial Tack (g/25mm): Standard 800–1500, Result: 1254 (23℃, 54% RH)
  • 180° Peel Strength (N/25mm): Standard ≥7.85, Result: 11.17 (23℃, 54% RH)
  • Adhesion Strength: Standard ≥60, Result: 70 (No shifting)
  • Post Heating: 100°C
  • Aging: High-temperature 65℃ (7 days) and low-temperature -65℃ (10 days) without adhesive residue

Installation Guidelines:

  • Application Temperature: +17°C to +18°C
  • Service Temperature: -45°C to +45°C
  • Tools Needed: Soft squeegee with buffer
  • Conformability: Flat and moderate curves, deep recesses with inlays
  • Directional: Yes
  • Overlap Width: 4–5 mm

Packaging:

  • Roll Width: 152 cm
  • Roll Length: 18 m

Important Notes

  • Screen images may not fully represent the color; always check the color swatch
  • Use rolls from the same production LOT for consistent color
  • Scratches during application or daily use are not covered under warranty

 

Features

Film construction

  • Film type: high-grade polymeric calendered vinyl with air-release channels
  • Series: 190 Series
  • Film thickness: 121 μm
  • Release liner thickness: 180 μm
  • Material: conformable polymeric vinyl with a flat matte metallic finish
  • Adhesive: Henkel solvent-based acrylic adhesive, transparent, ultra weather resistant, 1000 to 3000 cps viscosity, 12 μm dry thickness

Performance

  • Service temperature: -35°C to +35°C
  • Release force: 0.1 N/25mm (standard 0.04 to 0.12)
  • Initial tack: 1254 g/25mm (standard 800 to 1500)
  • Peel strength (180°): 11.17 N/25mm (standard ≥ 7.85)
  • Adhesion strength: 70 (standard ≥ 60, no shifting)
  • High temperature aging (65°C, 7 days): no adhesive residue
  • Low temperature aging (-65°C, 10 days): no adhesive residue

Warranty

  • With proper care and a ceramic coating, this matte metallic finish offers up to 3 years of outdoor durability on vertical panels and around 2 year across a full wrap, depending on climate zone.
  • It is more delicate than gloss, and parking indoors or under cover extends its life. Heat-removable, with minimal adhesive residue when removed within the recommended period.

Application
  • Application temperature +17°C to +23°C
  • Tools: soft squeegee with buffer
  • Conformability: flat and moderate curves, deep recesses with inlays
  • Post-heat: 100°C
  • Cure: 24 hrs above 10°C, 48 hrs at room temperature recommended
  • Overlap: 4 to 5 mm
  • Directional film, check orientation before cutting
  • Avoid overstretching during application
  • Remove protective cap before install

Care and maintenance

  • This is a flat matte metallic finish and it needs more care than a gloss or satin wrap. Outdoor durability is shorter than gloss and satin and depends heavily on climate, washing habits, and whether the vehicle is kept indoors. Parking under cover meaningfully extends the finish.
  • Wait 48 hours after installation before the first wash so the adhesive can fully set.
  • Hand wash only, using a pH-neutral shampoo (pH 3 to 11) and a clean microfiber mitt. Rinse grit away first, wash gently, then dry with a clean microfiber towel.
  • Avoid automatic car washes, brushes, abrasive pads, and high-pressure washers. All of these mark a matte surface.
  • Never use waxes, polishes, gloss enhancers, or any product containing solvents or petroleum distillates. These raise the sheen unevenly, dull the matte, and can permanently degrade the film.
  • A vinyl-safe, matte-compatible ceramic coating is recommended for added protection and easier cleaning. Standard gloss coatings will change a matte finish, so use a matte-rated product. Aftermarket coatings are applied at the owner's discretion and any coating-related damage is not covered.
  • Spot-clean fingerprints, fuel, bird droppings, and tree sap as soon as
    possible. The longer they sit, the more likely they stain.
  • Always test any cleaner or coating in a hidden area before treating the whole vehicle.

Disclaimer
  • All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of products for their purpose.
  • TeckWrap products are warranted to be free of defects in material for the period of shelf life. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.
  • Warranty does not cover normal wear, transportation, labor, or consequential damages.
  • Screen images may vary, refer to physical color swatches. Use same production LOT for color consistency. Scratches during application or daily use are not covered.

Valuable Advices

View all
  • DIY vs. Professional Window Tint Installation

    DIY vs. Professional Window Tint Installation

    Nothing changes a vehicle's personality quite like a dark smoky tint. But it can be expensive forcing you to choose between DIY installation and hiring a professional? DIY window tinting...

    E. Adnan |

  • How To Wrap Taillights

    How To Wrap Taillights

    Wrapping your taillights with a tint PPF is one of the simplest upgrades you can make to give your car a bold, smoky look. This step-by-step guide covers everything, from...

    E. Adnan |

  • Common Mistakes When Applying Color PPF

    Common Mistakes When Applying Color PPF

    Applying color paint protection film (PPF) can be tricky, and mistakes during the installation process can lead to bubbles, creases, and poor adhesion. Learn about the 5 most common color...

    E. Adnan |

  • When to Use Adhesive Promoters and Tack Reducers?

    When to Use Adhesive Promoters and Tack Reducers?

    Installing a car wrap isn’t just about applying vinyl—it requires skill, precision, and the right supporting products. Adhesive promoters help strengthen vinyl grip on tricky edges and curves, while tack...

    Nicki Ammelung |

  • Common Causes of Vinyl Adhesion Failure

    Common Causes of Vinyl Adhesion Failure

    Avoid Car Wrap Lifting & Peeling – Get a Flawless Finish Every TimeDIY vinyl wrapping can be challenging, and adhesion failure is one of the most common issues. From poor...

    Shukhrat Ismatov |

  • Wrapping a Rusty Car: Is It Possible?

    Wrapping a Rusty Car: Is It Possible?

    Car wrapping has exploded in popularity, offering a dynamic way to personalize vehicles. But what happens when the canvas isn't pristine? Can you successfully wrap a car with rust or...

    Phyllis Li |

  • How to Wrap a Car in Winter Time

    How to Wrap a Car in Winter Time

    Wrapping a car in vinyl during winter can be challenging due to cold temperatures, but with the right preparation and tools, you can still achieve a professional finish. Work in...

    Vasile Sayfutdin |