SKU: GAL03-HD-5M

Ultra Gloss Candy Purple Vinyl Wrap (GAL03-HD)

(9)
€200,95
Tax included Shipping calculated at checkout.

Description

Candy Purple is loud on purpose. It's a vivid pink-violet plum, a bright candy magenta with real show-car energy and a pink-leaning warmth that makes it impossible to ignore. It lives in the candy violet and electric fuchsia range, but the metallic structure underneath stays smooth enough that it reads premium and glossy rather than cheap neon. Strong light lifts it to an almost hot pink-purple. Shade deepens it to a rich grape-plum. It never sinks all the way into a dark luxury purple, and that's the whole idea: it stays a showpiece.

Among the Galaxy metallic purples it's the bright, pink end of the ladder. Silent Purple is the dark hypercar amethyst, Purple Pearl is the clean royal violet, and Candy Purple is the pinkest and most attention-grabbing of the three. It carries an illuminated orchid character that turns heads in a parking lot and lights up on camera, so it belongs on builds where loud-and-proud is the point: an Audi S5 or RS5, a BMW M3 or M4, a Porsche 911, a Lamborghini Huracán, the Nissan Z or GT-R, a Toyota GR Supra, a Civic Type R, or an EV styled to stand out.

Closest OEM match is BMW Individual Twilight Purple on its brighter magenta side. The Dodge and Plymouth Plum Crazy purples share the spirit, with Candy Purple running pinker and glossier. Audi Merlin Purple is a close base though Candy is more vivid, Porsche Rubystar points the same emotional direction with more red, and Jaguar Ultra Violet matches only on the bright violet side.

Key attributes:

  • High-Gloss aluminum vinyl wrap, vivid pink-violet candy plum with magenta energy
  • Advanced polymeric multilayered film with silver coating and air-release channels
  • Henkel solvent polyacrylate adhesive, transparent, ultra-weather-resistant, removable
  • Plastic (high-gloss) release liner for smooth finish and adhesive protection
  • Conformable and stretchable to edges and recessed areas
  • Safe removable adhesive, protects factory paint underneath

Features

Film construction

  • Film type: Advanced polymeric multilayered film with silver coating and air-release channels
  • Film thickness: 132 μm
  • Liner thickness: 180 μm (plastic high-gloss liner)
  • Adhesive: Henkel solvent polyacrylate, transparent, ultra weather-resistant, viscosity 1000–3000 cps, 12 μm dry
  • Finish: High-Gloss aluminum metallic, directional
  • Roll width: 1.52 m (5 ft)
  • Roll length: 18 m (59 ft)

Performance

  • Service temperature: -35°C to +35°C
  • 180° Peel strength: 9.7 N/25mm (standard ≥7.85)
  • Initial tack: 1055 g/25mm (standard 800–1500)
  • Release force: 0.1 N/25mm (standard 0.10–0.30)
  • Adhesion: 70 (standard ≥60, no shifting)
  • Aging tested: -65°C to +65°C, no residue
  • Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight.

Warranty

  • Built for long-term outdoor use, up to 3 years outdoor durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Heat-removable, with minimal adhesive residue when removed within the recommended three years.

Application
  • Apply at +17°C to +23°C
  • Tools: soft squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer, IR heater
  • Directional film. Orient all panels in the same direction for a consistent metallic flake appearance
  • Conformability: flat, curved, and recessed surfaces (do not overstretch)
  • Post-heat: 100°C flat surfaces, 120°C curves and overlaps
  • Cure time: 24 hours above 15°C; 48 hours at room temperature recommended for maximum adhesive activation
  • A steam vacuum or an IR heater is recommended for installation
  • Remove the protective cap before installing
  • Aftercare: pH-neutral products only, avoid hot wax or strong solvents

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of the products for their purpose.
TeckWrap products are warranted to be free of defects in materials for the shelf life period. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.
Warranty does not cover normal wear, transportation, labor, or consequential damages.
Screen images may vary; refer to physical color swatches. Use the same production LOT for color consistency. Film must be stored without the protective layer to prevent tunneling. Scratches during application or daily use are not covered.

Valuable Advices

View all
  • How To Wrap Taillights

    How To Wrap Taillights

    Wrapping your taillights with a tint PPF is one of the simplest upgrades you can make to give your car a bold, smoky look. This step-by-step guide covers everything, from...

    E. Adnan |

  • Common Mistakes When Applying Color PPF

    Common Mistakes When Applying Color PPF

    Applying color paint protection film (PPF) can be tricky, and mistakes during the installation process can lead to bubbles, creases, and poor adhesion. Learn about the 5 most common color...

    E. Adnan |

  • When to Use Adhesive Promoters and Tack Reducers?

    When to Use Adhesive Promoters and Tack Reducers?

    Installing a car wrap isn’t just about applying vinyl—it requires skill, precision, and the right supporting products. Adhesive promoters help strengthen vinyl grip on tricky edges and curves, while tack...

    Nicki Ammelung |

  • Common Causes of Vinyl Adhesion Failure

    Common Causes of Vinyl Adhesion Failure

    Avoid Car Wrap Lifting & Peeling – Get a Flawless Finish Every TimeDIY vinyl wrapping can be challenging, and adhesion failure is one of the most common issues. From poor...

    Shukhrat Ismatov |

  • Wrapping a Rusty Car: Is It Possible?

    Wrapping a Rusty Car: Is It Possible?

    Car wrapping has exploded in popularity, offering a dynamic way to personalize vehicles. But what happens when the canvas isn't pristine? Can you successfully wrap a car with rust or...

    Phyllis Li |

  • How to Wrap a Car in Winter Time

    How to Wrap a Car in Winter Time

    Wrapping a car in vinyl during winter can be challenging due to cold temperatures, but with the right preparation and tools, you can still achieve a professional finish. Work in...

    Vasile Sayfutdin |