Gloss Metallic Nickel Vinyl Wrap (RB28-HD)

Most silver wraps do the opposite of what a silver should. They go flat and dishwater-grey, swallowing the body lines the colour is supposed to show off. TeckWrap Gloss Metallic Vibrant Nickel works the other way. The neutral silver base carries a strong light-to-dark flop, so every crease, shoulder, and swage line on the car reads sharper than it did in factory paint.

Key Attributes

• Flop that shows the bodywork: neutral nickel-silver face drops to deep graphite on the flanks, so panel edges and body lines stay defined instead of disappearing.
  
• Premium polymeric hybrid film: multilayered construction with air-release channels holds an even gloss across large flat panels, roofs and bonnets included,  without orange peel.
  
• Weather-ready adhesive: Henkel solvent-based acrylic stays transparent and ultra weather-resistant, and installs without fighting you.
  
• Clean release: heat-removable with minimal adhesive residue when removed within the recommended period, leaving the factory finish intact.
  
• Orientation matters most here: conforms over smooth and medium-curved surfaces, and being a light directional metallic it shows a reversed panel more obviously than any dark colour, check direction before cutting and use one production LOT per vehicle.

TeckWrap Vibrant Nickel covers an unusually wide range for a silver. Direct sun lifts the face to a bright polished nickel, close to white along the crown of a bonnet. Overcast light settles it into a mid pewter with the flake clearly visible rather than hazed over. On shaded flanks and under wheel arches it drops away to a deep graphite, and that gap between face and flank is what makes the car look sculpted. Against a flat grey it has movement; against a budget silver it holds a clean neutral tone instead of drifting warm or dishwater.

OEM Match

• Closest to Porsche GT Silver Metallic.
  
• Same light-to-dark flop as Lexus Atomic Silver.
  
• Cooler than Mercedes-Benz Selenite Grey Metallic.
  
• Darker than Audi Florett Silver.
  
• Far more metallic than Audi Nardo Grey.

Silver and grey remain the highest-volume factory colours on the road, which makes this the lowest-risk colour change in the range, it suits executive sedans, SUVs, trucks, and EVs without committing the owner to a statement. It's also the natural answer for anyone who wanted Nardo Grey and then saw how flat it looks on a big panel.

Specifications

Conformable polymeric material with stable color pigments. Suitable for complete car wrapping (or any other smooth or curved surface).

• Film Thickness: 0.14 mm
• Backing Liner Thickness: 0.14 mm
• Release Liner Thickness: 0.03 mm
• Total Thickness (with liner): 0.31 mm

Note: Products that have "HD" letters in their SKU (product code) are with the plastic release liner (high-gloss films)

• Type of Film: Premium-grade polymeric multilayered hybrid vinyl film with air-release channels
• Width & Length: Standard roll size - 1.52m18m (59.8"708.6", 4.98ft59ft, 1.66yd19.6yd)

Adhesive & Release Liner

• Adhesive: Henkel solvent-based acrylic adhesive, transparent, ultra-weather-resistant, viscosity 1000~3000cps, thickness 12 μm dry

Storage

• Storing Period (Shelf Life): 2 years if stored at +10°C to +20°C, with a relative humidity of 50%, in the original package, away from direct sunlight, clean and dry place

Performance

• Durability/Warranty: Datasheet (Click the link)
• Application: from +17°C to +18°C, usage from -45°C to +45°C
• Release Force (N/25mm): Standart: 0.10-0.30, Result: 0.17 (23℃,54%H)
• Initial Tack (g/25mm): Testing method: GB31125-2014, Standart 800-1500, Result: 840 (23℃,54%H)
• 180° Peel Strength (N/25mm): Testing Method: GB/T2792-1998, Standart ≥6.8, Result: 8.7 (23℃,54%H)
• Adhesion Strength: Testing method: GB/T4851-1998, Standart ≥60, Result 70 (No shifting)
• Aging (65℃, seven days): Standart - High-temperature release without adhesive residue, result: no adhesive residue
• Aging (-65℃, ten days): Standart - Low-temperature release without adhesive residue, result: no adhesive residue
• Recommended Application Tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, IRR heater
• Application Method: Standard methods for calendered films. No overstretching. Post heating
• Post-heating Temperature: 90°C
• Cure Time: 24 hours above ten °C
• Aftercare: PH neutral. Avoid wax or solvents
• Directional: Yes

Tools: soft squeegees with buffers

The protective cap should be peeled off before installation.

Important note: The screen's images, colors, and finishes are approximate. For an accurate representation of the product, always check the color swatch. Rolls from the same production LOT number should be used for completing a wrap job, as a slight batch-to-batch variation of color may occur. The film may scratch during the application or a day in and out use. The warranty does not cover the scratching of the film.