SKU: RB31-HD-5M

Gloss Metallic Silver Fern Vinyl Wrap (RB31-HD)

(4)
€199,95
Tax included Shipping calculated at checkout.

Description

Every other silver in the line goes cold or platinum. Silver Fern goes the other way, into warm beige territory with a champagne softness under the gloss. It's the spec a German flagship reaches for when it wants to look expensive without looking bright.

Key Attributes

  • Warm beige-silver: champagne softness with a quiet sage undertone, never cold and never yellow
  • Gloss depth: multilayered polymeric hybrid film with metallic pigment for shine that stays muted rather than sharp
  • Clean chemistry: Henkel solvent-based acrylic adhesive, transparent and ultra weather-resistant, peels residue-free
  • Flawless application: high-grade PET release liner keeps the film flat for a smooth mirror gloss with no orange peel
  • Heat-conformable: stretches across edges, mirrors, and moderate recesses
  • Paint-safe: removable adhesive protects the factory paint underneath

Silver Fern isn't a pure silver. This is the warm-silver entry in TeckWrap's gloss line, sitting opposite both of its siblings, where Dolomite Silver goes cold and Porsche-clean and Arctic Silver chases maximum brilliance, Silver Fern goes warm and Audi-soft. Stand it in cloudy light and the warmth shows up, a creamy beige-pearl with champagne softness and a touch of sage at certain angles, the kind of muted reflection a flagship saves for its quietest spec. Direct sun brings out the metallic clarity. Shadow pulls it toward a soft pearl-grey. 

OEM Match

  • Closest to Audi Sahara Silver Metallic
  • Same warm champagne cast as BMW Cashmere Silver
  • Slightly darker than Ferrari Bianco Polo
  • In the same family as the Porsche Sand White specials
  • Same beige-pearl character as Peugeot and Citroën Beige Silver Nacre

Love that quiet flagship silver on an A8 or a 7 Series? Now put that warm champagne tone on your S-Class, Panamera, Range Rover, Flying Spur, or G90.

Features

Film Construction

  • Film Type: Premium-grade polymeric multilayered hybrid vinyl with air-release channels
  • Series: 190 Series
  • Film Thickness: 0.14 mm
  • Release Liner Thickness: 0.03 mm
  • Backing Liner Thickness: 0.14 mm
  • Total Thickness (with liner): 0.31 mm
  • Release Liner: 142 μm plastic
  • Roll Size: 1.52 m × 18 m (59.8" × 708.6")
  • Material: Conformable polymeric vinyl with stable color pigments
  • Adhesive: Henkel solvent-based acrylic adhesive, transparent and ultra weather resistant, 1000–3000 cps viscosity, 12 μm dry thickness

Performance

  • Service temperature: -35°C to +35°C
  • Release force: 0.17 N/25mm (standard 0.10 to 0.30)
  • Initial tack: 840 g/25mm (standard 800 to 1500)
  • Peel strength (180°): 8.7 N/25mm (standard ≥ 6.8)
  • Adhesion strength: 70 (standard ≥ 60, no shifting)
  • High temperature aging (65°C, 7 days): no adhesive residue
  • Low temperature aging (-65°C, 10 days): no adhesive residue

Warranty
Built for long-term outdoor use, up to 3 years outdoor durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Heat-removable, with minimal adhesive residue when removed within the recommended three years.

Application
  • Application temperature: +17°C to +23°C
  • Tools: squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer, IR heater
  • Conformability: smooth and medium-curved surfaces
  • Post-heat: 100°C
  • Cure: 24 hrs above 10°C (48 hrs at room temperature recommended)
  • Overlap: 3–4 mm
  • Directional film, check orientation before cutting
  • Avoid overstretching during application
  • Remove protective cap before install
  • Aftercare: pH-neutral products only, avoid waxes and harsh solvents

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of products for their purpose.

TeckWrap products are warranted to be free of defects in material for the period of shelf life. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.

Warranty does not cover normal wear, transportation, labor, or consequential damages.

Screen images may vary, refer to physical color swatches. Use same production LOT for color consistency. Scratches during application or daily use are not covered.

Valuable Advices

View all
  • DIY vs. Professional Window Tint Installation

    DIY vs. Professional Window Tint Installation

    Nothing changes a vehicle's personality quite like a dark smoky tint. But it can be expensive forcing you to choose between DIY installation and hiring a professional? DIY window tinting...

    E. Adnan |

  • How To Wrap Taillights

    How To Wrap Taillights

    Wrapping your taillights with a tint PPF is one of the simplest upgrades you can make to give your car a bold, smoky look. This step-by-step guide covers everything, from...

    E. Adnan |

  • Common Mistakes When Applying Color PPF

    Common Mistakes When Applying Color PPF

    Applying color paint protection film (PPF) can be tricky, and mistakes during the installation process can lead to bubbles, creases, and poor adhesion. Learn about the 5 most common color...

    E. Adnan |

  • When to Use Adhesive Promoters and Tack Reducers?

    When to Use Adhesive Promoters and Tack Reducers?

    Installing a car wrap isn’t just about applying vinyl—it requires skill, precision, and the right supporting products. Adhesive promoters help strengthen vinyl grip on tricky edges and curves, while tack...

    Nicki Ammelung |

  • Common Causes of Vinyl Adhesion Failure

    Common Causes of Vinyl Adhesion Failure

    Avoid Car Wrap Lifting & Peeling – Get a Flawless Finish Every TimeDIY vinyl wrapping can be challenging, and adhesion failure is one of the most common issues. From poor...

    Shukhrat Ismatov |

  • Wrapping a Rusty Car: Is It Possible?

    Wrapping a Rusty Car: Is It Possible?

    Car wrapping has exploded in popularity, offering a dynamic way to personalize vehicles. But what happens when the canvas isn't pristine? Can you successfully wrap a car with rust or...

    Phyllis Li |

  • How to Wrap a Car in Winter Time

    How to Wrap a Car in Winter Time

    Wrapping a car in vinyl during winter can be challenging due to cold temperatures, but with the right preparation and tools, you can still achieve a professional finish. Work in...

    Vasile Sayfutdin |