SKU: RB31-HD-5M

Gloss Metallic Silver Fern Vinyl Wrap (RB31-HD)

(4)
€200,95
Tax included Shipping calculated at checkout.

Description

A warm beige-silver where every other silver in the line goes cold or platinum.

Key attributes:

  • Warm beige-silver with champagne softness and a quiet sage undertone
  • Built from a multilayered polymeric hybrid film with metallic pigment for gloss depth and shine
  • Solvent-based Henkel acrylic adhesive, transparent and ultra weather-resistant, fully removable
  • High-grade PET release liner keeps the film flat for a smooth mirror gloss with no orange peel
  • Stretches with heat across edges, mirrors, and moderate recesses
  • Removable adhesive protects your factory paint when the wrap comes off

Silver Fern isn't a pure silver. Stand it in cloudy light and the warmth shows up, a creamy beige-pearl with champagne softness, a touch of sage in certain angles, the kind of muted reflection a German flagship saves for its quietest spec. Direct sun brings out the metallic clarity, shadow pulls it toward soft pearl-grey. Through every condition the warmth stays, never tipping into cold silver or yellow champagne.

The character is dead-on Audi Sahara Silver Metallic, slightly darker than Ferrari Bianco Polo, close to BMW Cashmere Silver and the Porsche Sand White specials. Beige Silver Nacre in the Peugeot and Citroën playbook. It tracks the Audi A8, BMW 7 Series, Porsche Panamera, Bentley Bentayga, and Rolls-Royce Ghost when those cars are speccing their quietest luxury silver.

This is the warm-silver entry in TeckWrap's gloss line. Where Dolomite Silver goes cold and Porsche-clean, Silver Fern goes warm and Audi-soft, two opposite poles of OEM silver under one finish. It belongs on builds that want quiet luxury rather than shine: a Mercedes-Benz S-Class and E-Class, an Audi A8 and A7, a BMW 7 Series and 5 Series, a Porsche Panamera, a Bentley Flying Spur and Bentayga, a Rolls-Royce Ghost, a Lexus LS, a Range Rover, a Genesis G90.

Features

Film construction

  • Film type: premium-grade polymeric multilayered hybrid vinyl with air-release channels
  • Film thickness: 122 μm
  • Release liner thickness: 142 μm plastic
  • Series: 190 Series
  • Roll size: 1.52 m × 18 m (59.8" × 708.6")
  • Material: conformable polymeric vinyl with stable color pigments
  • Adhesive: Henkel solvent-based acrylic adhesive, transparent and ultra weather resistant, 1000 to 3000 cps viscosity, 12 μm dry thickness

Performance

  • Service temperature: -35°C to +35°C
  • Release force: 0.17 N/25mm (standard 0.10 to 0.30)
  • Initial tack: 840 g/25mm (standard 800 to 1500)
  • Peel strength (180°): 8.7 N/25mm (standard ≥ 6.8)
  • Adhesion strength: 70 (standard ≥ 60, no shifting)
  • High temperature aging (65°C, 7 days): no adhesive residue
  • Low temperature aging (-65°C, 10 days): no adhesive residue

Warranty
Built for long-term outdoor use, up to 3 years outdoor durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Heat-removable, with minimal adhesive residue when removed within the recommended three years.

Application
  • Application temperature: +17°C to +23°C
  • Tools: squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer, IR heater
  • Conformability: smooth and medium-curved surfaces
  • Post-heat: 100°C
  • Cure: 24 hrs above 10°C (48 hrs at room temperature recommended)
  • Overlap: 3–4 mm
  • Directional film, check orientation before cutting
  • Avoid overstretching during application
  • Remove protective cap before install
  • Aftercare: pH-neutral products only, avoid waxes and harsh solvents

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of products for their purpose.

TeckWrap products are warranted to be free of defects in material for the period of shelf life. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.

Warranty does not cover normal wear, transportation, labor, or consequential damages.

Screen images may vary, refer to physical color swatches. Use same production LOT for color consistency. Scratches during application or daily use are not covered.

Valuable Advices

View all
  • How To Wrap Taillights

    How To Wrap Taillights

    Wrapping your taillights with a tint PPF is one of the simplest upgrades you can make to give your car a bold, smoky look. This step-by-step guide covers everything, from...

    E. Adnan |

  • Common Mistakes When Applying Color PPF

    Common Mistakes When Applying Color PPF

    Applying color paint protection film (PPF) can be tricky, and mistakes during the installation process can lead to bubbles, creases, and poor adhesion. Learn about the 5 most common color...

    E. Adnan |

  • When to Use Adhesive Promoters and Tack Reducers?

    When to Use Adhesive Promoters and Tack Reducers?

    Installing a car wrap isn’t just about applying vinyl—it requires skill, precision, and the right supporting products. Adhesive promoters help strengthen vinyl grip on tricky edges and curves, while tack...

    Nicki Ammelung |

  • Common Causes of Vinyl Adhesion Failure

    Common Causes of Vinyl Adhesion Failure

    Avoid Car Wrap Lifting & Peeling – Get a Flawless Finish Every TimeDIY vinyl wrapping can be challenging, and adhesion failure is one of the most common issues. From poor...

    Shukhrat Ismatov |

  • Wrapping a Rusty Car: Is It Possible?

    Wrapping a Rusty Car: Is It Possible?

    Car wrapping has exploded in popularity, offering a dynamic way to personalize vehicles. But what happens when the canvas isn't pristine? Can you successfully wrap a car with rust or...

    Phyllis Li |

  • How to Wrap a Car in Winter Time

    How to Wrap a Car in Winter Time

    Wrapping a car in vinyl during winter can be challenging due to cold temperatures, but with the right preparation and tools, you can still achieve a professional finish. Work in...

    Vasile Sayfutdin |