SKU: TC01-5M

Matte Sable Black Vinyl Wrap (TC01)

(1)
R$ 1.000,00
Shipping calculated at checkout.

Description

Sable Black is the softest of TeckWrap's blacks. Where a dead-flat matte reads hard and technical, this one looks deep and velvety, closer to brushed suede than to primer. One buyer rated it the best soft black they had used, and that is the idea, a rich black with just enough softness to look expensive up close.

Key Attributes

  • Soft, velvety black: a deep matte with a smooth, suede-like surface that looks richer and warmer than a hard flat black.
  • Low, even glare: the finish keeps reflections soft and diffused, so the color stays deep in both sun and shade.
  • Henkel adhesive: solvent acrylic adhesive that stays clear and holds up to sun, rain, and regular washing.
  • Clean removal: comes off with heat and leaves the factory paint underneath unharmed.
  • Wraps edges and curves: air-release channels and a stretchable film follow panels, edges, and moderate recesses.

Sable Black trades the hard, technical look of a dead-flat matte for something softer. In low light it reads as a deep, even black with a faint velvet softness. In direct sun it stays calm, with none of the hard glare of gloss. The depth is what people notice. It looks plush rather than flat, which is why it sits well on luxury sedans and SUVs. Use it when you want a black that feels expensive instead of aggressive.

OEM Match

  • Softer and warmer than a standard dead-flat matte black.
  • Close in mood to Mercedes designo magno black.
  • A velvety alternative to BMW Frozen Black.
  • Reads almost like a low satin black in some light.

Soft matte blacks like this are factory options on high-end sedans and SUVs. TeckWrap Sable Black puts that look on any car, and it comes off cleanly when you want a change.

Features

Film construction

  • Film type: premium-grade polymeric hybrid film with air-release channels
  • Series: 180 Series
  • Film thickness: 0.12 mm
  • Liner thickness: 0.11 mm
  • Total thickness with liner: 0.23 mm
  • Liner: transparent plastic release liner with air-release grid pattern
  • Adhesive: Henkel solvent-based acrylic, transparent, ultra weather-resistant, 1000 to 3000 cps viscosity, 12 μm dry
  • Finish: matte, solid color
  • Roll width: 1.52 m (5 ft)
  • Roll length: 18 m (59 ft)
  • Roll weight: 13 kg

Performance

  • Service temperature: -35°C to +35°C
  • Dimensional stability: shrinkage less than 0.20%
  • Plastification: 25% to 32%
  • Breaking strength: 30.7 N/10mm avg (ASTM D3759/D3759M-05)
  • 180° peel strength to steel: 9 N/10mm avg (ASTM D3330/D3330-04)
  • UV resistance: grade 4 to 5 (ASTM D4329-13 Cycle A, ISO 105-A02), 48h exposure
  • Storage: 2 year shelf life at +10°C to +20°C, 50% relative humidity, in original packaging, away from direct sunlight

Warranty

Super matte is a delicate finish and needs more care than gloss or satin. With proper care and a matte-safe ceramic coating, expect up to 3 years of outdoor durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Parking indoors or under cover extends the finish. Heat-removable within 2 years for the cleanest removal, with minimal adhesive residue.

Application
  • Surface: apply only to a clean, sound, fully cured OEM factory finish. Repainted, primed, aftermarket, or damaged surfaces can affect adhesion and removal and fall outside warranty coverage.
  • Application temperature: +17°C to +23°C
  • Tools: standard squeegee with soft buffer, heat gun, knife, masking tape, gloves
  • Conformability: smooth and medium-curved surfaces
  • Directional film. Keep orientation consistent across all panels and use one production LOT per vehicle to avoid finish variation between panels
  • Overlap: 3 to 4 mm
  • Avoid overstretching during application
  • Avoid over-buffing and hard squeegee pressure, which can burnish a matte surface to a shine
  • Post-heat: 90°C
  • Remove the protective cap before installing
  • Professional installation strongly recommended for the best result and to keep the warranty valid
  • Aftercare: hand wash with a matte-safe, pH-neutral shampoo (pH 3 to 11). Avoid waxes, polishes, gloss enhancers, solvents, and petroleum-distillate products, and never use automatic washes, brushes, or high-pressure washers.

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of the products for their purpose.

TeckWrap products are warranted to be free of defects in material for the period of shelf life. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.

Warranty does not cover normal wear, transportation, labor, or consequential damages. Coverage requires proper storage, professional installation, and maintenance in line with TeckWrap's care guidance, and does not apply to films installed on non-OEM, repainted, or damaged surfaces. If you notice cracking, lifting, edge failure, or other defects, contact your installer promptly for assessment.

Matte and super matte finishes can burnish to a shine if rubbed, scrubbed, or polished, and show fingerprints, water spots, and contaminant staining more readily than gloss. These are normal characteristics of a matte finish and are not covered.

Removal from aged, repainted, or poorly bonded factory paint may lift paint or clear coat. TeckWrap is not responsible for the condition of the underlying paint upon removal.

Screen images may vary, refer to physical color swatches. Use the same production LOT for color consistency. Scratches during application or daily use are not covered.

Valuable Advices

View all
  • DIY vs. Professional Window Tint Installation

    DIY vs. Professional Window Tint Installation

    Nothing changes a vehicle's personality quite like a dark smoky tint. But it can be expensive forcing you to choose between DIY installation and hiring a professional? DIY window tinting...

    E. Adnan |

  • How To Wrap Taillights

    How To Wrap Taillights

    Wrapping your taillights with a tint PPF is one of the simplest upgrades you can make to give your car a bold, smoky look. This step-by-step guide covers everything, from...

    E. Adnan |

  • Common Mistakes When Applying Color PPF

    Common Mistakes When Applying Color PPF

    Applying color paint protection film (PPF) can be tricky, and mistakes during the installation process can lead to bubbles, creases, and poor adhesion. Learn about the 5 most common color...

    E. Adnan |

  • When to Use Adhesive Promoters and Tack Reducers?

    When to Use Adhesive Promoters and Tack Reducers?

    Installing a car wrap isn’t just about applying vinyl—it requires skill, precision, and the right supporting products. Adhesive promoters help strengthen vinyl grip on tricky edges and curves, while tack...

    Nicki Ammelung |

  • Common Causes of Vinyl Adhesion Failure

    Common Causes of Vinyl Adhesion Failure

    Avoid Car Wrap Lifting & Peeling – Get a Flawless Finish Every TimeDIY vinyl wrapping can be challenging, and adhesion failure is one of the most common issues. From poor...

    Shukhrat Ismatov |

  • Wrapping a Rusty Car: Is It Possible?

    Wrapping a Rusty Car: Is It Possible?

    Car wrapping has exploded in popularity, offering a dynamic way to personalize vehicles. But what happens when the canvas isn't pristine? Can you successfully wrap a car with rust or...

    Phyllis Li |

  • How to Wrap a Car in Winter Time

    How to Wrap a Car in Winter Time

    Wrapping a car in vinyl during winter can be challenging due to cold temperatures, but with the right preparation and tools, you can still achieve a professional finish. Work in...

    Vasile Sayfutdin |