SKU: HM01-5M

Satin Silk Dark Gray Vinyl Wrap (HM01)

(3)
€184,95
Shipping calculated at checkout.

Description

Gray is the easiest color to get wrong, too flat and it reads like primer, too metallic and it turns into cheap sparkle. TeckWrap Dark Grey Silk holds the middle. It sits as a deep, cool anthracite for most of the day, then releases fine silver and gunmetal highlights only when the light catches it, all under a soft silk-satin sheen.

Key Attributes

  • Cool anthracite base: a deep graphite grey with cool charcoal undertones, clearly grey, never drifting toward black or blue.
  • Silk-satin sheen: a fine, low-luster surface, softer than standard satin, that looks smooth and paint-like and keeps swirl marks and fingerprints from showing.
  • Metallic that stays subtle: silver and gunmetal flake that sits quiet in flat light and only lifts when the sun hits, adding depth without ever turning flashy.
  • Directional film: metallic films are directional, so every panel is oriented the same way and run from one production LOT per car to keep the sheen even across the whole vehicle.
  • Henkel adhesive, clean removal: transparent solvent acrylic adhesive with air-release channels lays flat and bubble-free, holds through weather, and heat-removes cleanly within the recommended window.

For most of the day, Dark Gray Silk reads as a solid, cool anthracite, the kind of understated gray that looks equally at home on an executive saloon and a track build. The silk-satin surface stays even and muted until the light shifts, and then fine silver and gunmetal reflections surface across the hood, roof, and flanks, giving the panels quiet dimension instead of sparkle. Set beside a flat matte grey it looks richer and more finished; beside a gloss metallic it looks calmer and more expensive.

OEM Match

  • Closest to Audi Daytona Gray Pearl rendered in satin rather than gloss, the same cool gunmetal tone.
  • In the same family as BMW Frozen Dark Gray Metallic, a touch lighter and cooler.
  • Darker and more metallic than Audi Nardo Gray.
  • More refined than standard gloss gunmetals like Porsche Agate Gray Metallic.
  • Cooler and greyer than a black-based satin such as our own Satin Black Silver.

OEM gunmetal grays this refined usually come only in gloss, or as a costly matte-metallic special order. TeckWrap Dark Gray Silk delivers that anthracite-and-silver look in satin on an RS Q8, a Model S, a G-Wagon, or any car off the lot, no special order required.

Features

Film construction

  • Film type: Renolit hybrid polymeric film with air-release channels
  • Film thickness: 0.13 mm
  • Liner thickness: 0.17 mm
  • Total thickness with liner: 0.30 mm
  • Liner: transparent plastic release liner with air-release grid pattern
  • Adhesive: Henkel solvent-based acrylic, transparent, 1000 to 3000 cps viscosity, 12 μm dry
  • Finish: satin metallic, directional
  • Roll width: 1.52 m (5 ft)
  • Roll length: 18 m (59 ft)
  • Roll weight: 13 kg

Performance

  • Service range: -35°C to +35°C
  • Tensile strength: MD 29.5 / CD 24.8 N/mm² (ASTM D882-02)
  • Elongation at break: MD 206.8 / CD 196.4 (ASTM D882-02)
  • Dimensional stability: 2% shrinkage at 70°C (ASTM D1204-02)
  • Surface tension: 34 dynes/cm (ASTM D2578-04a)
  • Storage: 2 years at +10°C to +20°C, 50% RH, dry conditions

Warranty

Built for long-term outdoor use, with up to 3 years of durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Horizontal surfaces such as roofs, hoods, and bonnets take the most sun and weather and carry a shorter expected life. The warranty covers manufacturing defects such as bubbling, cracking, and adhesive failure when the film is properly stored, professionally installed, and maintained per the care guidance. It does not cover abrasion, scratches, gloss change, or normal wear. Heat-removable within 2 years for the cleanest removal, with minimal adhesive residue.

Application
  • Surface: apply only to a clean, sound, fully cured OEM factory finish. Repainted, primed, aftermarket, or damaged surfaces can affect adhesion and removal and fall outside warranty coverage.
  • Apply at +17°C to +23°C
  • Tools: squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer
  • Conformability: smooth and medium-curved surfaces
  • Post-heat: 100°C
  • Cure: 24 hrs above 10°C (48 hrs at room temperature recommended)
  • Overlap: 3 to 4 mm
  • Directional film, especially metallic and pearlescent colors. Keep film orientation consistent across all panels and use one production LOT per vehicle to avoid color shift between panels.
  • Avoid overstretching during application
  • Remove the protective cap before installing
  • Professional installation strongly recommended for the best result and to keep the warranty valid
  • Aftercare: hand wash with a pH-neutral shampoo (pH 3 to 11). Avoid waxes, solvents, and petroleum-distillate products, and never use automatic washes, brushes, or high-pressure washers.

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of the products for their purpose.

TeckWrap products are warranted to be free of defects in material for the period of shelf life. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.

Warranty does not cover normal wear, transportation, labor, or consequential damages. Coverage requires proper storage, professional installation, and maintenance in line with TeckWrap's care guidance, and does not apply to films installed on non-OEM, repainted, or damaged surfaces. If you notice cracking, lifting, edge failure, or other defects, contact your installer promptly for assessment.

Removal from aged, repainted, or poorly bonded factory paint may lift paint or clear coat. TeckWrap is not responsible for the condition of the underlying paint upon removal.

Aftermarket waxes, sealants, and ceramic coatings are applied at the owner’s discretion. Damage caused by aftermarket products is not covered.

Screen images may vary, refer to physical color swatches. Use the same production LOT for color consistency. Scratches during application or daily use are not covered.

Valuable Advices

View all
  • DIY vs. Professional Window Tint Installation

    DIY vs. Professional Window Tint Installation

    Nothing changes a vehicle's personality quite like a dark smoky tint. But it can be expensive forcing you to choose between DIY installation and hiring a professional? DIY window tinting...

    E. Adnan |

  • How To Wrap Taillights

    How To Wrap Taillights

    Wrapping your taillights with a tint PPF is one of the simplest upgrades you can make to give your car a bold, smoky look. This step-by-step guide covers everything, from...

    E. Adnan |

  • Common Mistakes When Applying Color PPF

    Common Mistakes When Applying Color PPF

    Applying color paint protection film (PPF) can be tricky, and mistakes during the installation process can lead to bubbles, creases, and poor adhesion. Learn about the 5 most common color...

    E. Adnan |

  • When to Use Adhesive Promoters and Tack Reducers?

    When to Use Adhesive Promoters and Tack Reducers?

    Installing a car wrap isn’t just about applying vinyl—it requires skill, precision, and the right supporting products. Adhesive promoters help strengthen vinyl grip on tricky edges and curves, while tack...

    Nicki Ammelung |

  • Common Causes of Vinyl Adhesion Failure

    Common Causes of Vinyl Adhesion Failure

    Avoid Car Wrap Lifting & Peeling – Get a Flawless Finish Every TimeDIY vinyl wrapping can be challenging, and adhesion failure is one of the most common issues. From poor...

    Shukhrat Ismatov |

  • Wrapping a Rusty Car: Is It Possible?

    Wrapping a Rusty Car: Is It Possible?

    Car wrapping has exploded in popularity, offering a dynamic way to personalize vehicles. But what happens when the canvas isn't pristine? Can you successfully wrap a car with rust or...

    Phyllis Li |

  • How to Wrap a Car in Winter Time

    How to Wrap a Car in Winter Time

    Wrapping a car in vinyl during winter can be challenging due to cold temperatures, but with the right preparation and tools, you can still achieve a professional finish. Work in...

    Vasile Sayfutdin |