SKU: CG23-HD-5M

High Gloss Moss Green Vinyl Wrap (CG23-HD)

(9)
$328.00
Tax included Shipping calculated at checkout.

Description

Moss Green is the Scandinavian-minimalist sage of the catalog, a soft dusty pastel with heavy grey content, a warm olive base, and very low saturation. The important thing to set up front: this doesn't read as a true green. Most people see sage grey, pistachio, dusty olive cream, or muted eucalyptus before they see green. It's highly light-reactive, reading sage grey under cloud, pale moss in direct sun, warm olive cream at sunset, and pastel pistachio under indoor LEDs. It's glossier and cleaner than OEM sage paint while sharing the muted Scandinavian design language behind current Volvo, Polestar, Hyundai Ioniq, and Rivian factory colors.

This is the soft sage / Scandinavian-EV green of the lineup, and it sits apart from the catalog's olives rather than among them. Where Khaki, French Olive, and Camouflage are saturated, warm, or tactical olives, Moss Green is desaturated, grey-led, and calm. Closer to a sage neutral than a green. (The wider lane also holds Wilderness, Gecko, Gable, Tiffany, and Amphibian.) Calm, mature, and architectural, it's a lifestyle color rather than a performance one, and the gloss is what gives it the wet pastel depth that reads as a factory finish rather than flat paint. It suits modern luxury EVs, Scandinavian platforms, JDM coupes, and minimalist European wagons and crossovers: a Volvo XC60, XC90, EX30, or EX90, a Polestar 2 or 4, a Hyundai Ioniq 5 or 6, a Rivian R1S or R1T, a Tesla Model Y or 3, a Porsche Macan or Taycan, an Audi Q5, A6 Avant, or RS6, a VW Tiguan R-Line or Golf R, a Toyota GR86 or Subaru BRZ, a Land Rover Defender 90, or a Genesis GV70 or GV80.

On OEM references the primary anchor is Volvo Sage Green Metallic, with the Hyundai Ioniq sage as a counterpart, Porsche Stone Grey and the modern PTS soft colors, and a vintage VW Reed Green showing through in low sun.

Key attributes:

  • Super Gloss HD vinyl wrap, soft Scandinavian sage with heavy grey content and warm olive base
  • Premium polymeric hybrid film with air-release channels
  • Henkel solvent-based acrylic adhesive, transparent, ultra-weather-resistant, removable
  • High-grade PET release liner for smooth finish and adhesive protection
  • Conformable to curves, mirrors, and recessed panels
  • Safe removable adhesive, protects factory paint underneath

Features

Film construction

  • Film type: Premium polymeric hybrid with air-release channels and Super Gloss HD finish
  • Film thickness: 110 µm
  • Liner thickness: 142 µm plastic (HD high-gloss)
  • Adhesive: Henkel solvent-based acrylic, ultra-weather-resistant, viscosity 1000–3000 cps, 12 µm dry
  • Top layer: PET protective layer (peel before heating)
  • Roll width: 5ft (1,52m)
  • Full roll length: 59ft (18 m)

Performance

  • Service temperature: -35°C to +35°C
  • Release force: 0.18 N/25mm (standard 0.10–0.30)
  • Initial tack: 1015 g/25mm (standard 800–1500, GB31125-2014)
  • Peel strength (180°): 8.1 N/25mm (standard ≥4.9, GB/T2792-1998)
  • Adhesion strength: 70 (standard ≥60, no shifting, GB/T4851-1998)
  • Aging tested: -65°C to +65°C, no residue
  • Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight.

Warranty

  • Built for long-term outdoor use, up to 3 years outdoor durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Heat-removable, with minimal adhesive residue when removed within the recommended three years.

Application
  • Application temperature: +17°C to +23°C
  • Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer, IR heater
  • Conformability: smooth and medium-curved surfaces
  • Post-heat: 95–100°C (gloss finish)
  • Cure: 24 hrs above 10°C (48 hrs at room temperature recommended)
  • Overlap: 3–4 mm
  • Non-directional film
  • Avoid overstretching during application
  • Remove the protective cap before installing
  • Aftercare: pH-neutral products only, avoid hot wax or strong solvents

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of the products for their purpose.


TeckWrap products are warranted to be free of defects in materials for the shelf life period. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.
Warranty does not cover normal wear, transportation, labor, or consequential damages.
Screen images may vary; refer to physical color swatches. Use the same production LOT for color consistency. Film must be stored without the protective layer to prevent tunneling. Scratches during application or daily use are not covered.

Valuable Advices

View all
  • How To Wrap Taillights

    How To Wrap Taillights

    Wrapping your taillights with a tint PPF is one of the simplest upgrades you can make to give your car a bold, smoky look. This step-by-step guide covers everything, from...

    E. Adnan |

  • Common Mistakes When Applying Color PPF

    Common Mistakes When Applying Color PPF

    Applying color paint protection film (PPF) can be tricky, and mistakes during the installation process can lead to bubbles, creases, and poor adhesion. Learn about the 5 most common color...

    E. Adnan |

  • When to Use Adhesive Promoters and Tack Reducers?

    When to Use Adhesive Promoters and Tack Reducers?

    Installing a car wrap isn’t just about applying vinyl—it requires skill, precision, and the right supporting products. Adhesive promoters help strengthen vinyl grip on tricky edges and curves, while tack...

    Nicki Ammelung |

  • Common Causes of Vinyl Adhesion Failure

    Common Causes of Vinyl Adhesion Failure

    Avoid Car Wrap Lifting & Peeling – Get a Flawless Finish Every TimeDIY vinyl wrapping can be challenging, and adhesion failure is one of the most common issues. From poor...

    Shukhrat Ismatov |

  • Wrapping a Rusty Car: Is It Possible?

    Wrapping a Rusty Car: Is It Possible?

    Car wrapping has exploded in popularity, offering a dynamic way to personalize vehicles. But what happens when the canvas isn't pristine? Can you successfully wrap a car with rust or...

    Phyllis Li |

  • How to Wrap a Car in Winter Time

    How to Wrap a Car in Winter Time

    Wrapping a car in vinyl during winter can be challenging due to cold temperatures, but with the right preparation and tools, you can still achieve a professional finish. Work in...

    Vasile Sayfutdin |