SKU: CG02-PRO+-5M

Super Gloss Prime White Vinyl Wrap (CG02-PRO+)

€200,95
Shipping calculated at checkout.

Description

Prime White stays clean. It's an ultra-clean gloss white with a self-healing top coat, so minor scratches and swirls fade on their own without polish or correction. The white holds neutral as the light moves, never drifting blue or cream, and the reflections stay smooth and uninterrupted. The self-healing layer gives it a liquid, wet-paint depth that an ordinary gloss white can't reach, closer to fresh factory paint or a ceramic-coated piano white than to a standard aftermarket wrap. It reads as paint, not film.

This is the professional-grade, self-healing version of TeckWrap's clean white. Its sibling CG02-HD Super White is the same factory-fresh look in the standard production film; Prime White is the one built to stay showroom-fresh through daily driving, scratch recovery included. It's a different idea from the pearl whites, too: where Frosted Pearl goes futuristic-EV and Diamond White goes glamorous, Prime White is straight OEM paint realism. Clean, disciplined, and timeless. It suits performance and luxury builds where ceramic-coated paint character earns its place: a Tesla Model S or Model 3 Highland, a Porsche Taycan or 911, BMW M3 or M5, an Audi RS6 or RS7, a Mercedes S-Class or AMG GT, a Lexus LS, a Range Rover, a Nissan GT-R, a Genesis G90, or a Toyota GR Supra.

On OEM references it tracks the cleanest factory whites: Tesla Pearl White Multi-Coat, Porsche Carrara White Gloss, BMW Alpine White, Audi Glacier White, the Lexus ultra-clean pearl whites, and the Mercedes MANUFAKTUR gloss whites.

Key attributes:

  • Super Gloss PRO+ vinyl wrap, ultra-clean white with self-healing top coat and wet-look depth
  • Self-healing top coat: minor scratches and swirls recover on their own, no polish or correction needed
  • Premium polymeric hybrid film with air-release channels
  • Henkel solvent-based acrylic adhesive, transparent, ultra-weather-resistant, removable
  • High-grade PET release liner for smooth finish and adhesive protection
  • Safe removable adhesive, protects factory paint underneath

Features

Film construction

  • Film type: Premium-grade polymeric hybrid with air-release channels and self-healing top coat
  • Film thickness: 110 µm
  • Liner thickness: 142 µm plastic
  • Adhesive: Henkel solvent-based acrylic, removable, viscosity 1000–3000 cps, 12 µm dry
  • Finish: Super gloss with self-healing top coat, non-directional
  • Roll width: 152 cm (5 ft)
  • Full roll length: 18 m or 23 m

Performance

  • Peel strength: 8.1 N/25mm (standard ≥4.9)
  • Initial tack: 1015 g/25mm (standard 800–1500)
  • Release force: 0.18 N/25mm (standard 0.10–0.30)
  • Adhesion: 70 (standard ≥60, no shifting)
  • Aging tested: -65°C to +65°C, no residue
  • Storage: 2 years at +10°C to +20°C, 50% RH, dry conditions
  • Self-healing surface (minor scratches recover with warmth)

Application
  • Apply at +17°C to +23°C
  • Service range: -30°C to +45°C
  • Soft squeegee with buffer
  • Conformability: smooth and medium-curved surfaces
  • Post-heat: 95–100°C (gloss finish)
  • Overlap: 3–4 mm
  • Non-directional film
  • Remove protective cap before install
  • Aftercare: pH-neutral products only, avoid hot wax or strong solvents

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of products for their purpose.

TeckWrap products are warranted to be free of defects in material for the period of shelf life. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.

Warranty does not cover normal wear, transportation, labor, or consequential damages.

Screen images may vary, refer to physical color swatches. Use same production LOT for color consistency. Scratches beyond the self-healing range are not covered.

Valuable Advices

View all
  • How To Wrap Taillights

    How To Wrap Taillights

    Wrapping your taillights with a tint PPF is one of the simplest upgrades you can make to give your car a bold, smoky look. This step-by-step guide covers everything, from...

    E. Adnan |

  • Common Mistakes When Applying Color PPF

    Common Mistakes When Applying Color PPF

    Applying color paint protection film (PPF) can be tricky, and mistakes during the installation process can lead to bubbles, creases, and poor adhesion. Learn about the 5 most common color...

    E. Adnan |

  • When to Use Adhesive Promoters and Tack Reducers?

    When to Use Adhesive Promoters and Tack Reducers?

    Installing a car wrap isn’t just about applying vinyl—it requires skill, precision, and the right supporting products. Adhesive promoters help strengthen vinyl grip on tricky edges and curves, while tack...

    Nicki Ammelung |

  • Common Causes of Vinyl Adhesion Failure

    Common Causes of Vinyl Adhesion Failure

    Avoid Car Wrap Lifting & Peeling – Get a Flawless Finish Every TimeDIY vinyl wrapping can be challenging, and adhesion failure is one of the most common issues. From poor...

    Shukhrat Ismatov |

  • Wrapping a Rusty Car: Is It Possible?

    Wrapping a Rusty Car: Is It Possible?

    Car wrapping has exploded in popularity, offering a dynamic way to personalize vehicles. But what happens when the canvas isn't pristine? Can you successfully wrap a car with rust or...

    Phyllis Li |

  • How to Wrap a Car in Winter Time

    How to Wrap a Car in Winter Time

    Wrapping a car in vinyl during winter can be challenging due to cold temperatures, but with the right preparation and tools, you can still achieve a professional finish. Work in...

    Vasile Sayfutdin |