SKU: CK892G-5M

Farbwechsel-Folierung in Lila-Blau (CK892G)

(10)
Normaler Preis €185,95
inkl. MwSt. Versand wird beim Checkout berechnet.

Beschreibung

„Gloss Purple Blue“ (CK892G) ist eine leuchtende Perlmutt-Oberfläche, die eisiges Blau, Violett und sattes Purpur zu einer raffinierten, hochglänzenden Oberfläche verschmilzt. Auf den ersten Blick erscheint die Folie als sanftes Blau-Violett-Perlmutt mit außergewöhnlicher Klarheit und Tiefe. Wenn das Licht über die Oberfläche wandert, kommen zarte Indigo-, Lavendel- und Königsviolett-Reflexe zum Vorschein und erzeugen einen fließenden Farbübergang, der seinen Charakter ständig verändert.

Im Schatten und bei bewölktem Himmel behält die Folie ein edles lavendelblaues Erscheinungsbild mit kühlen Perlmutt-Untertönen bei. Bei direkter Sonneneinstrahlung werden die Perlmuttpigmente zunehmend lebhafter und verwandeln die Oberfläche in eine leuchtende Mischung aus saphirblauen, violetten und tiefpurpurfarbenen Reflexen, die über jede Kurve und Karosserielinie fließen. Im Gegensatz zu herkömmlichen Farbwechsel-Folien, die dramatische Übergänge erzeugen, bietet die CK892G ein weicheres, luxuriöseres Schillern, das eher an eine maßgeschneiderte Werkslackierung erinnert als an eine auffällige Chamäleon-Optik. Das Ergebnis ist elegant, modern und ausgesprochen hochwertig.

Features

Film construction

  • Film type: high-grade polymeric calendered vinyl film with air-release channels
  • Film thickness: 0.15 mm
  • Liner thickness: 0.14 mm
  • Total thickness with liner: 0.32 mm
  • Liner: transparent plastic release liner (0.03 mm) with air-release grid pattern
  • Adhesive: Henkel solvent-based acrylic, transparent, ultra weather-resistant, 1000 to 3000 cps viscosity, 12 μm dry
  • Finish: gloss color-shift, flat metal (chameleon), directional
  • Roll width: 1.52 m (5 ft)
  • Roll length: 18 m (59 ft)
  • Roll weight: 14 kg

Performance

  • Service temperature: -35°C to +35°C
  • Dimensional stability: shrinkage less than 3%
  • Plastification: 25% to 32%
  • Breaking strength: 28.7 N/10mm avg (ASTM D3759/D3759M-05)
  • Storage: 2 year shelf life at +10°C to +20°C, 50% relative humidity, in original packaging, away from direct sunlight

Warranty

Built for long-term outdoor use, with up to 3 years of durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Horizontal surfaces such as roofs, hoods, and bonnets take the most sun and weather and carry a shorter expected life. The warranty covers manufacturing defects such as bubbling, cracking, and adhesive failure when the film is properly stored, professionally installed, and maintained per the care guidance. It does not cover abrasion, scratches, gloss change, or normal wear. Heat-removable within 2 years for the cleanest removal, with minimal adhesive residue.

Application

  • Surface: apply only to a clean, sound, fully cured OEM factory finish. Repainted, primed, aftermarket, or damaged surfaces can affect adhesion and removal and fall outside warranty coverage.
  • Apply at +17°C to +23°C
  • Tools: squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer
  • Conformability: smooth and medium-curved surfaces
  • Post-heat: 100°C
  • Cure: 24 hrs above 10°C (48 hrs at room temperature recommended)
  • Overlap: 4 to 5 mm
  • Directional film. The color-shift effect orients with the film, so keep orientation consistent across all panels and use one production LOT per vehicle to avoid a mismatched shift between panels.
  • Avoid overstretching during application, which can distort the color-shift pigment
  • Remove the protective cap before installing
  • Professional installation strongly recommended for the best result and to keep the warranty valid
  • Aftercare: hand wash with a pH-neutral shampoo (pH 3 to 11). Avoid waxes, solvents, and petroleum-distillate products, and never use automatic washes, brushes, or high-pressure washers.

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of the products for their purpose.

TeckWrap products are warranted to be free of defects in material for the period of shelf life. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.

Warranty does not cover normal wear, transportation, labor, or consequential damages. Coverage requires proper storage, professional installation, and maintenance in line with TeckWrap's care guidance, and does not apply to films installed on non-OEM, repainted, or damaged surfaces. If you notice cracking, lifting, edge failure, or other defects, contact your installer promptly for assessment.

Color-shift films change apparent color with viewing angle, lighting, and surroundings, and the direction of the shift follows the film orientation. This is the defining characteristic of a color-shift film and is not a defect.

Removal from aged, repainted, or poorly bonded factory paint may lift paint or clear coat. TeckWrap is not responsible for the condition of the underlying paint upon removal.

Screen images may vary, refer to physical color swatches. Use the same production LOT for color consistency. Scratches during application or daily use are not covered.