Vinylfolie in Satin-Goldgelb (VCH408-S)

Film Construction

• Film Type: Polymeric hybrid film with silver coating and air-release channels
• Series: 180 series
• Film Thickness: 0.15 mm
• Backing Liner Thickness: 0.17 mm
• Total Thickness (with liner): 0.32 mm
• Liner: Felix Schoeller 20-104-20-1,9, double-sided PE-coated Kraft, one side solventless silicone-coated, air-release (ISO 9001, ISO 14001, OHSAS 18001)
• Adhesive: Henkel solvent-based acrylic, transparent, ultra-weather-resistant, viscosity 1000–3000 cps, 12 µm dry
• Finish: Satin, directional
• Roll Width: 5 ft (1.52 m)
• Full Roll Length: 59 ft (18 m)

Performance

• Service range: -35°C to +35°C
• 180° peel strength: 10.66 N/25mm (standard ≥6.8)
• Initial tack: 822 g/25mm (standard 800–1500)
• Release force: 0.1 N/25mm (standard 0.10–0.30)
• Adhesion: 70, no shifting (standard ≥60)
• Aging tested +65°C and -65°C: no adhesive residue
• Storage: 2 years at +10°C to +20°C, 50% RH, in original package, away from direct sunlight

Warranty

• Built for long-term outdoor use, up to 3 years outdoor durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Heat-removable, with minimal adhesive residue when removed within the recommended three years.
• Metalized films require careful handling. The appearance of the metalized layer can change with crumpling, overstretching, or excessive heat. The film may scratch during application or daily use. The warranty does not cover the scratching of the film.

• Apply at +17°C to +23°C
• Tools: soft squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer, IR heater
• Conformability: smooth and medium-curved surfaces, avoid overstretching
• Directional film, check orientation before cutting
• Overlap: 3–4 mm
• Post-heat: 95°C
• Cure time: 24 hours above 15°C; 48 hours at room temperature recommended for maximum adhesive activation
• Handle the satin chrome surface carefully; it can scratch during installation

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of the products for their purpose.
TeckWrap products are warranted to be free of defects in materials for the shelf life period. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.
Warranty does not cover normal wear, transportation, labor, or consequential damages.
Screen images may vary; refer to physical color swatches. Use the same production LOT for color consistency. Film must be stored without the protective layer to prevent tunneling. Scratches during application or daily use are not covered.