SKU: CG03-HD-18M

Amazon Gray (CG03-HD) غلاف الفينيل

(1)
سعر البيع 3,743.00 dh سعر منتظم 5,618.00 dh
شحن محسوبة عند الخروج.

وصف

تحقيق التطور المعدل مع التفاف الأمازون الرمادي فينيل. سواء كنت ترغب في إضافة ميزة حديثة إلى سيارتك أو إكمال مشروع تصميم داخلي أنيق ، فإن هذا الغلاف فينيل يوفر نهاية عالية من العيوب في كل مرة.

يوفر TeckWrap ألوانًا جديدة من Gloss HD تمنح سيارتك لمسة صلبة ولامعة - سلسة بدون أي قشر برتقالي. المواد قابلة للتمديد ، ولف كل حافة ومساحة مريحة بسرعة. المواد اللاصقة آمنة ولا تسبب أي مشكلة عند إلغاء التثبيت. يحتوي الفيلم على طبقة واقية للحيوانات الأليفة ، مما يساعد على تجنب الخدوش أثناء التثبيت (يجب تقشيره قبل التدفئة). بطانة البلاستيك تجعل سطح الفيلم أكثر لامعة وعاكس. 

تحديد

سمك الفيلم: 110 ميكرون

إطلاق سماكة بطانة: 142 ميكرون

نوع الفيلم: فيلم بوليمر عالي الجودة مع إطلاق الهواء.

لاصق: Henkel المذيبات القائمة على المادة اللاصقة ، مقاومة للطقس وموثوق بها.

refire liner: بطانة بلاستيكية لسطح لامع وعاكس.

المتانة/الضمان: يرجى الرجوع إلى ورقة البيانات للحصول على التفاصيل.

نتائج الاختبار:

قوة الافراج (N/25mm): المعيار: 0.10-0.30 | النتيجة: 0.18 (23 درجة مئوية ، 54 ٪ ساعة)

تاك الأولي (G/25mm): المعيار: 800-1500 | النتيجة: 1020 (23 درجة مئوية ، 54 ٪ ساعة)

180 درجة قشر قوة (N/25mm): المعيار: ≥4.9 | النتيجة: 8.3 (23 درجة مئوية ، 54 ٪ ساعة)

قوة الالتصاق: المعيار: ≥60 | النتيجة: 72 (لا تحول).

نصائح التثبيت:

نطاق درجة الحرارة: التطبيق: +16 درجة مئوية إلى +18 درجة مئوية | الاستخدام: -30 درجة مئوية إلى +45 درجة مئوية.

الأدوات اللازمة: الممسحة القياسية مع المخزن المؤقت الناعم.

التوافق: أسطح ناعمة ومتوسطة المنحنى.

بعد التسخين: 95 درجة مئوية للحصول على أفضل النتائج.

عرض التداخل: 3-4 مم.

الاتجاه: رقم

طبقة واقية: تقشر قبل التثبيت.

ملاحظات مهمة: 

تحقق من عملات اللون للحصول على تمثيل دقيق لـ Amazon Gray.

استخدم لفات من نفس مجموعة الإنتاج للألوان المتسقة.

يضيف Wrap Amazon Gray CG0vinyl لمسة من الأناقة الحديثة إلى مشروعك. ضع طلبك اليوم ، وتجربة مزيج مثالي من الأسلوب والأداء!

Features

Film construction

  • Film type: Premium polymeric hybrid with air-release channels and Super Gloss HD finish
  • Film thickness: 110 µm
  • Liner thickness: 142 µm plastic (HD high-gloss)
  • Adhesive: Henkel solvent-based acrylic, ultra-weather-resistant, viscosity 1000–3000 cps, 12 µm dry
  • Top layer: PET protective layer (peel before heating)
  • Roll width: 5ft (1,52m)
  • Full roll length: 59ft (18 m)

Performance

  • Service temperature: -35°C to +35°C
  • Release force: 0.18 N/25mm (standard 0.10–0.30)
  • Initial tack: 1015 g/25mm (standard 800–1500, GB31125-2014)
  • Peel strength (180°): 8.1 N/25mm (standard ≥4.9, GB/T2792-1998)
  • Adhesion strength: 70 (standard ≥60, no shifting, GB/T4851-1998)
  • Aging tested: -65°C to +65°C, no residue
  • Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight.

Warranty

  • Built for long-term outdoor use, up to 3 years outdoor durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Heat-removable, with minimal adhesive residue when removed within the recommended three years.

Application

  • Application temperature: +17°C to +23°C
  • Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer, IR heater
  • Conformability: smooth and medium-curved surfaces
  • Post-heat: 95–100°C (gloss finish)
  • Cure: 24 hrs above 10°C (48 hrs at room temperature recommended)
  • Overlap: 3–4 mm
  • Non-directional film
  • Avoid overstretching during application
  • Remove the protective cap before installing
  • Aftercare: pH-neutral products only, avoid hot wax or strong solvents

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of the products for their purpose.


TeckWrap products are warranted to be free of defects in materials for the shelf life period. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.
Warranty does not cover normal wear, transportation, labor, or consequential damages.
Screen images may vary; refer to physical color swatches. Use the same production LOT for color consistency. Film must be stored without the protective layer to prevent tunneling. Scratches during application or daily use are not covered.