SKU: CG23-HD-5M

غلاف الفينيل الطحلب (CG23-HD)

(8)
سعر منتظم 2,156.00 dh
شحن محسوبة عند الخروج.

وصف

وصف قصير

يوفر TeckWrap ألوان Gloss HD جديدة تمنح سيارتك لمسة صلبة ولامعة. سلسة واحدة دون أي قشر برتقالي. المادة قابلة للامتداد ، ويمكن للمرء أن يلف كل حافة ومساحة مريحة بسهولة. والمواد اللاصقة آمنة دون أن تمنحك أي مشكلة عند إلغاء التثبيت. يحتوي الفيلم على طبقة واقية للحيوانات الأليفة ، والتي تساعد على تجنب الخدوش أثناء عملية التثبيت (يجب تقشيرها قبل التدفئة) ، وبطانة بلاستيكية تجعل سطح الفيلم أكثر لامعة وعاكسة. 

تحديد

رانه سمك الفيلم (أم): 110
سمك بطانة الإطلاق (UM): 142
نوع الفيلم: فيلم بوليمري عالي الجودة مع إصدار الهواء

لاصق: لاصق أكريليك قائم على المذيبات Henkel ، مقاوم للحيوية ، اللزوجة 1000 ~ 3000cps ، سمك 12 ميكرون جاف
refire liner: بطانة بلاستيكية
فترة التخزين: عامين إذا تم تخزينه في +10 درجة مئوية إلى +20 درجة ، الرطوبة النسبية 50 ٪ ، في الحزمة الأصلية ، بعيدا عن أشعة الشمس المباشرة ، مكان نظيف وجاف. هام: يجب إزالة الطبقة الواقية العلوية قبل التثبيت ، ويجب تخزين الفيلم بدون طبقة واقية لمنع "النفق".
المتانة/الضمان: ورقة البيانات (انقر على الرابط) 

قوة الافراج (N/25mm): Standart: 0.10-0.30 ، النتيجة: 0،18 (23 ℃ ، 54 ٪ H)

تاك الأولي (g/25mm): طريقة الاختبار: GB31125-2014: Standart 800-1500 ، النتيجة: 1015 (23℃,54%H)

180 درجة قشر قوة (N/25mm): طريقة الاختبار: GB/T2792-1998: Standart ≥4.9 ، النتيجة: 8،1 (23℃,54%H)

قوة التصاق: طريقة الاختبار: GB/T4851-1998 ، Standart ≥60 ، النتيجة 70 (بدون تحول)

    الشيخوخة (65 ℃ ، سبعة أيام): Standart -إطلاق درجات الحرارة العالية بدون بقايا لاصقة ، النتيجة: لا توجد بقايا لاصقة

    الشيخوخة (-65 ℃ ، عشرة أيام): Standart - منخفضإطلاق درجات الحرارة بدون بقايا لاصقة ، النتيجة: لا توجد بقايا لاصقة

    طَرد:  عرض لفة 152 سم وطول 18 أو 23 مترًا

    تثبيت النصائح:

    التطبيق: من +16 درجة إلى +18 درجة ، الاستخدام من -30 درجة إلى +45 درجة °
    الأدوات: ممسحة قياسية مع مخزن مؤقت ناعم
    التوافق: سطح منحني ناعم ومتوسط
    الاتجاه: لا
    عرض تداخل: 3-4mm

    بعد التسخين: 95 Celcius 

    يجب تقشير الغطاء الواقي قبل التثبيت.

    ملاحظة مهمة: صور الشاشة والألوان والتشطيبات تقريبية. للحصول على التمثيل الحقيقي للمنتج ، تحقق دائمًا من حوامل اللون. يجب استخدام لفات من نفس رقم الكثير من الإنتاج لاستكمال وظيفة التفاف ، حيث قد يحدث تباين ضئيل من اللون. قد يخدش الفيلم أثناء التطبيق أو يوم واحد للاستخدام. الضمان لا يغطي خدش الفيلم.

    Features

    Film construction

    • Film type: Premium polymeric hybrid with air-release channels and Super Gloss self-healing top coat
    • Film thickness: 110 µm
    • Liner thickness: 142 µm plastic
    • Adhesive: Henkel solvent-based acrylic, ultra-weather-resistant, viscosity 1000–3000 cps, 12 µm dry
    • Finish: Super Gloss self-healing Moss Green, non-directional
    • Top layer: PET protective layer (peel before heating)
    • Roll width: 152 cm (5 ft)
    • Full roll length: 18 m or 23 m

    Performance

    • Release force: 0.18 N/25mm (standard 0.10–0.30)
    • Initial tack: 1015 g/25mm (standard 800–1500, GB31125-2014)
    • Peel strength (180°): 8.1 N/25mm (standard ≥4.9, GB/T2792-1998)
    • Adhesion strength: 70 (standard ≥60, no shifting, GB/T4851-1998)
    • Aging tested: -65°C to +65°C, no residue
    • Self-healing top coat reflows micro-scratches and swirl marks with heat
    • Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight

    Warranty

    Standard TeckWrap limited warranty. Scratches beyond the self-healing range not covered. Use same production LOT for color consistency across panels.

    Application

    • Apply at +17°C to +23°C
    • Service range: -30°C to +45°C
    • Standard squeegee with soft buffer
    • Conformability: smooth and medium-curved surfaces
    • Post-heat: 95°C
    • Cure: 24 hrs (48 hrs recommended)
    • Overlap: 3–4 mm
    • Non-directional film, flexible panel orientation
    • Remove PET protective cap before heating
    • For deeper scratches, apply gentle heat from a heat gun to activate the self-healing top coat

    Disclaimer

    All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of products for their purpose.

    TeckWrap products are warranted to be free of defects in material for the period of shelf life. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.

    Warranty does not cover normal wear, transportation, labor, or consequential damages.

    The self-healing top coat reflows surface micro-scratches and swirl marks with heat. Deep cuts, abrasions, and impact damage are not self-healing and are not covered under warranty. Film must be stored without the protective layer to prevent tunneling. Screen images may vary, refer to physical color swatches. Use same production LOT for color consistency.