SKU: CG11-HD-5M

غلاف فينيل أخضر تيفاني عالي اللمعان (CG11-HD)

(14)
سعر منتظم 2,180.00 dh
شحن محسوبة عند الخروج.

وصف

غالبًا ما تفقد الأغلفة ذات اللون الأخضر الفاتح بريقها عند تغليف السيارة بالكامل. أما لون «تيفاني الأخضر عالي اللمعان» من TeckWrap فيحافظ على درجته النعناعية الزاهية، بينما يضفي اللمعان عمقًا على كل لوحة من لوحات السيارة. 

الخصائص الرئيسية

  • لون نقي كالحلوى: أخضر تيفاني مشرق مع لمسة خفيفة من اللون الأزرق المائي، ويحافظ على حدة اللون بدلاً من أن يتلاشى تحت أشعة الشمس القوية. 
  • لمعان يبرز اللون: يحافظ الفيلم الهجين متعدد الطبقات المصنوع من البوليمر على لمعان الطلاء ووضوحه، بحيث يبدو لون النعناع غنيًا بدلاً من أن يبدو شاحبًا. 
  • تركيب نظيف: تعمل قنوات إخراج الهواء على طرد الهواء المحبوس أثناء التركيب، مما يحافظ على المنحنيات وخطوط هيكل السيارة خالية من الفقاعات.
  • فيلم مناسب للمنحنيات: يلتف حول المرايا والمصدات والمنحنيات والألواح المقعرة بشكل معتدل بتحكم ثابت. 
  • ثبات مقاوم للعوامل الجوية: يظل لاصق الأكريليك المذيب من Henkel شفافًا، ويثبت في جميع الظروف الجوية المتغيرة، ويمكن إزالته دون ترك أي بقايا. 

"تيفاني جرين" هو لون يقع بين النعناع واليشم والأزرق المائي الاستوائي. تحت الإضاءة الساطعة، يميل إلى درجات أبرد مع صبغة سماوية نقية. أما ضوء النهار فيبرز لمسات النعناع الناعمة التي تنتشر عبر كل منحنى. يحتوي الطلاء النهائي على نسبة معدنية ضئيلة جدًا، لذا يخلق اللمعان سطحًا ناعمًا يشبه الحلوى بدلاً من سطح لامع. تجعل السيارات الرياضية الحديثة وسيارات السيدان الكهربائية والكوبيه الأنيقة الانعكاسات تبدو شبه سائلة. 

تطابق مع لون المصنع

  • الأقرب إلى لون «بورشه مينت جرين».
  • أكثر إشراقًا من لون «جيد جرين» من بورش.
  • أنظف من لون BMW Individual Mint Green.
  • أكثر مائية من لون داتسون صنشاين توركواز.

عادةً ما تظل الألوان المصنعية الأكثر ندرة حصريةً لعدد قليل من الطرازات. يضفي لون تيفاني الأخضر نفس درجة اللون النعناعي النقية على السيارة التي تمتلكها بالفعل.

Features

Film Construction

  • Film Type: Premium polymeric hybrid with air-release channels and Super Gloss HD finish
  • Film Thickness: 0.14 mm
  • Release Liner Thickness: 0.04 mm
  • Backing Liner Thickness: 0.14 mm
  • Total Thickness (with liner): 0.32 mm
  • Liner Thickness: 142 µm plastic (HD high-gloss)
  • Adhesive: Henkel solvent-based acrylic, ultra-weather-resistant, viscosity 1000–3000 cps, 12 µm dry
  • Top Layer: PET protective layer (peel before heating)
  • Roll Width: 5 ft (1.52 m)
  • Full Roll Length: 59 ft (18 m)

Performance

  • Service temperature: -35°C to +35°C
  • Release force: 0.18 N/25mm (standard 0.10–0.30)
  • Initial tack: 1015 g/25mm (standard 800–1500, GB31125-2014)
  • Peel strength (180°): 8.1 N/25mm (standard ≥4.9, GB/T2792-1998)
  • Adhesion strength: 70 (standard ≥60, no shifting, GB/T4851-1998)
  • Aging tested: -65°C to +65°C, no residue
  • Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight.

Warranty

  • Built for long-term outdoor use, up to 3 years outdoor durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Heat-removable, with minimal adhesive residue when removed within the recommended three years.

Application

  • Application temperature: +17°C to +23°C
  • Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer, IR heater
  • Conformability: smooth and medium-curved surfaces
  • Post-heat: 95–100°C (gloss finish)
  • Cure: 24 hrs above 10°C (48 hrs at room temperature recommended)
  • Overlap: 3–4 mm
  • Non-directional film
  • Avoid overstretching during application
  • Remove the protective cap before installing
  • Aftercare: pH-neutral products only, avoid hot wax or strong solvents

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of the products for their purpose.


TeckWrap products are warranted to be free of defects in materials for the shelf life period. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.
Warranty does not cover normal wear, transportation, labor, or consequential damages.
Screen images may vary; refer to physical color swatches. Use the same production LOT for color consistency. Film must be stored without the protective layer to prevent tunneling. Scratches during application or daily use are not covered.