SKU: CG02-HD-5M

Super White (CG02-HD) لف فينيل

(2)
سعر منتظم 2,149.00 dh
شحن محسوبة عند الخروج.

وصف

يوفر TeckWrap ألوان Gloss HD جديدة تمنح سيارتك لمسة صلبة ولامعة. مع سطح أملس خالي من أي قشر برتقالي ، تم تصميم هذا التفاف عالي الدقة لتعزيز أي مشروع. المواد قابلة للامتداد للغاية ، مما يجعل من السهل لف كل حافة ومساحة مريحة. بالإضافة إلى ذلك ، فإن المادة اللاصقة آمنة وخالية من المتاعب لإلغاء التثبيت عند الحاجة.

تحمي طبقة واقية من الحيوانات الأليفة الفيلم من الخدوش أثناء التثبيت (تأكد من تقشيره قبل التسخين) ، بينما تضمن بطانة بلاستيكية سطحًا لامعًا وعاكسًا.

تحديد

سمك الفيلم: 110 ميكرون 

إطلاق سماكة بطانة: 142 ميكرون

نوع الفيلم: فيلم بوليمري عالي الجودة مع تقنية إطلاق الهواء

لاصق: لاصق أكريليك قائم على المذيبات Henkel ، مقاوم للحيوية ، اللزوجة 1000 ~ 3000cps ، سمك 12 ميكرون جاف

refire liner: بطانة بلاستيكية

فترة التخزين: عامين عند تخزينه بين +10 درجة مئوية إلى +20 درجة مئوية ، الرطوبة النسبية 50 ٪ ، في الحزمة الأصلية ، بعيدًا عن أشعة الشمس المباشرة ، في مكان نظيف وجاف.
هام: قم بإزالة الطبقة الواقية العلوية قبل التثبيت ، وقم بتخزين الفيلم بدونه لمنع "النفق".

المتانة/الضمان: الرجوع إلى ورقة البيانات (انقر على الرابط لمزيد من التفاصيل).

اختبارات الالتصاق والأداء

قوة الافراج (N/25mm): قياسي 0.10-0.30 ، النتيجة 0.18 (23 درجة مئوية ، 54 ٪ RH)

Tack الأولي (G/25mm): القياسي 800-1500 ، النتيجة 1015 (23 درجة مئوية ، 54 ٪ RH)

180 درجة قوة قشر (N/25mm): المعيار ≥4.9 ، النتيجة 8.1 (23 درجة مئوية ، 54 ٪ RH)

قوة الالتصاق: المعيار ≥60 ، النتيجة 70 (لا تحول)

اختبارات الشيخوخة:

درجة حرارة عالية (65 درجة مئوية ، 7 أيام): لا توجد بقايا لاصقة

درجة حرارة منخفضة (-65 درجة مئوية ، 10 أيام): لا توجد بقايا لاصقة

نصائح التثبيت

درجة حرارة التطبيق: +18 درجة مئوية إلى +22 درجة مئوية

نطاق درجة حرارة الاستخدام: -30 درجة مئوية إلى +45 درجة مئوية

الأدوات المطلوبة: ممسحة قياسية مع مخزن مؤقت ناعم

التوافق: مناسبة للأسطح الملساء والمتوسطة المنحنى

الاتجاه: لا

عرض التداخل: 3-4 مم

درجة حرارة ما بعد التسخين: 95 درجة مئوية

هام: قشر قبعة الواقية قبل التثبيت.

ملحوظات

الصور والألوان والتشطيبات الموضحة على الشاشة تقريبية. الرجوع دائمًا إلى حوامل اللون المادي لتمثيل دقيق.

استخدم لفات من نفس رقم الكثير من الإنتاج لتجنب اختلافات ألوان ضئيلة في الدُفعة.

قد يخدش الفيلم أثناء التطبيق أو الاستخدام اليومي. الخدش غير مغطى تحت الضمان.

يقدم هذا التفاف أداءً فائقاً وجماليًا للمهنيين وعشاق DIY على حد سواء. اطلب الآن وخذ مشاريعك إلى المستوى التالي!

Features

Film construction

  • Film type: Premium polymeric hybrid with air-release channels and Super Gloss HD finish
  • Film thickness: 110 µm
  • Liner thickness: 142 µm plastic (HD high-gloss)
  • Adhesive: Henkel solvent-based acrylic, ultra-weather-resistant, viscosity 1000–3000 cps, 12 µm dry
  • Top layer: PET protective layer (peel before heating)
  • Roll width: 5ft (1,52m)
  • Full roll length: 59ft (18 m)

Performance

  • Service temperature: -35°C to +35°C
  • Release force: 0.18 N/25mm (standard 0.10–0.30)
  • Initial tack: 1015 g/25mm (standard 800–1500, GB31125-2014)
  • Peel strength (180°): 8.1 N/25mm (standard ≥4.9, GB/T2792-1998)
  • Adhesion strength: 70 (standard ≥60, no shifting, GB/T4851-1998)
  • Aging tested: -65°C to +65°C, no residue
  • Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight.

Warranty

  • Built for long-term outdoor use, up to 3 years outdoor durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Heat-removable, with minimal adhesive residue when removed within the recommended three years.

Application

  • Application temperature: +17°C to +23°C
  • Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer, IR heater
  • Conformability: smooth and medium-curved surfaces
  • Post-heat: 95–100°C (gloss finish)
  • Cure: 24 hrs above 10°C (48 hrs at room temperature recommended)
  • Overlap: 3–4 mm
  • Non-directional film
  • Avoid overstretching during application
  • Remove the protective cap before installing
  • Aftercare: pH-neutral products only, avoid hot wax or strong solvents

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of the products for their purpose.


TeckWrap products are warranted to be free of defects in materials for the shelf life period. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.
Warranty does not cover normal wear, transportation, labor, or consequential damages.
Screen images may vary; refer to physical color swatches. Use the same production LOT for color consistency. Film must be stored without the protective layer to prevent tunneling. Scratches during application or daily use are not covered.