Sku: RB40-HD-5M

钛紫罗兰色(RB40-HD)乙烯基包裹

(1)
正常价格 ¥1,583.00
船运 在结帐时计算。

描述

用Teckwrap的钛紫罗兰色乙烯基包装纸为您的车辆大胆而豪华的升级。这款高级金属紫色包装包装提供了高清饰面,非常适合在保护汽车油漆的同时发表声明。为专业人士和DIY爱好者设计,可确保耐用性和光滑,无泡沫的应用。

关键功能
  • 令人惊叹的饰面:高清金属紫罗兰色,外观时尚,大胆。
  • 耐用性:持久,可抵抗紫外线损坏,划痕和日常磨损。
  • 易于应用: 空气释放技术可确保无泡泡,光滑的光洁度。
  • 用途: 完整的汽车包装,定制装饰或内部细节的理想选择。
技术数据
  • 材料:带有金属色素的多层高晶乙烯基薄膜。
  • 胶片的厚度:0.15mm(59 mils)。
  • 释放衬里:独特的塑料衬里,可增强膜的光泽和反射特性。带有空气释放通道。
  • 可拉伸性:使用热量最高20%,适用于中等复杂曲线。
  • 粘合剂类型: 汉克尔溶剂的丙烯酸粘合剂,透明,超气耐
  • 室外耐用性:3 - 5年可靠的性能。
  • 申请方法:仅干燥申请。 
  • 建议的温度:最低施用温度为 +17°C( +63°F)。用法从-35°C到 +35°C
  • 存储时期(保质期): 2年如果在 +10°C至 +20°C下储存,相对湿度为50%,在原始包装中,远离阳光直射,干净和干燥的地方
  • 尺寸选项:5英尺x 9.8英尺,5英尺x 16英尺,5英尺x 33英尺,5英尺x 49英尺,5英尺x 59英尺

申请准则

为了确保最佳结果,建议采用以下步骤:

  • 准备:在涂抹之前,请确保表面干净,光滑,没有蜡或油脂。
  • 拆除保护帽: 在应用之前,请剥离防护宠物盖,并在没有防护帽的情况下存放胶片以防止“隧道”。
  • 安装:使用 软缓冲挤压器的光滑效果并施加加热以使其紧密曲线和边缘。在施用前后,不要过度伸展材料,加热后,并将车辆在室内20°C以上24-48小时保持。
  • 护理:用温和的肥皂和水洗涤以保持饰面。避免磨料材料。
  • 加热温度:95°C。 施加后加热至关重要。
  • 推荐的应用工具:挤压,缓冲,刀,掩蔽胶带,热枪,磁铁,手套,IRR温度计,IRR加热器
  • 乙烯基膜是方向性的。

重要的考虑因素

颜色一致性:虽然我们努力准确地表示颜色,但屏幕显示中的变化可能会影响感知。有关精确的颜色匹配,请咨询我们的 物理色板书。
批量匹配: 为避免音调略有差异,请确保单个项目中使用的卷来自同一生产。
维护:虽然这部电影抵制了较小的划痕和环境磨损,但定期清洁和维护将有助于保留其光滑的光洁度。 


Features

Film construction

  • Film type: premium-grade polymeric multilayered hybrid vinyl with air-release channels
  • Film thickness: 122 μm
  • Release liner thickness: 142 μm plastic
  • Series: 190 Series
  • Roll size: 1.52 m × 18 m (59.8" × 708.6")
  • Material: conformable polymeric vinyl with stable color pigments
  • Adhesive: Henkel solvent-based acrylic adhesive, transparent and ultra weather resistant, 1000 to 3000 cps viscosity, 12 μm dry thickness

Performance

  • Service temperature: -35°C to +35°C
  • Release force: 0.17 N/25mm (standard 0.10 to 0.30)
  • Initial tack: 840 g/25mm (standard 800 to 1500)
  • Peel strength (180°): 8.7 N/25mm (standard ≥ 6.8)
  • Adhesion strength: 70 (standard ≥ 60, no shifting)
  • High temperature aging (65°C, 7 days): no adhesive residue
  • Low temperature aging (-65°C, 10 days): no adhesive residue

Warranty
Built for long-term outdoor use, up to 3 years outdoor durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Heat-removable, with minimal adhesive residue when removed within the recommended three years.

Application

  • Application temperature: +17°C to +23°C
  • Tools: squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer, IR heater
  • Conformability: smooth and medium-curved surfaces
  • Post-heat: 100°C
  • Cure: 24 hrs above 10°C (48 hrs at room temperature recommended)
  • Overlap: 3–4 mm
  • Directional film, check orientation before cutting
  • Avoid overstretching during application
  • Remove protective cap before install
  • Aftercare: pH-neutral products only, avoid waxes and harsh solvents

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of products for their purpose.

TeckWrap products are warranted to be free of defects in material for the period of shelf life. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.

Warranty does not cover normal wear, transportation, labor, or consequential damages.

Screen images may vary, refer to physical color swatches. Use same production LOT for color consistency. Scratches during application or daily use are not covered.