Sku: RB08-HD-5M

珊瑚桃(RB08-HD)乙烯基包裹

(12)
正常价格 ¥1,591.00
船运 在结帐时计算。

描述


您是专门的探险家吗?要求您在Teckwrap Coral Peach中发现发现的邀请,该颜色鼓励您寻找新的体验。现在下令拥抱令人惊讶的未知。

我们的光泽金属乙烯基包裹具有光滑,高光的饰面,并由高级聚合物多层乙烯基薄膜制成,并配有空气释放通道。  光泽金属包裹是耐用的,具有良好的一致性。它足够伸展,可以快速缠绕在车辆的每个边缘和嵌入式区域。  Gloss Metallic还使用安全的溶剂聚丙烯酸酯粘合剂,易于安装,并且在汽车涂料上柔和。 

规格

具有稳定颜色色素的构象材料。适用于完整的汽车包裹(或任何其他光滑或弯曲的表面)。 

t电影的厚度(UM): 122
释放衬里的厚度(UM): 142

笔记: 他们的SKU(产品代码)中具有“高清”字母的产品与塑料释放衬里(高光胶片)

电影类型: 带空气释放通道的高级聚合物多层乙烯基薄膜 

宽度和长度: 标准卷尺寸-1.52m* 18m(59.8“* 708,6”,4.98ft* 59ft,1.66yd* 19,6yd)

系列: 190系列

粘合剂: 汉克尔溶剂基丙烯酸粘合剂,透明,耐超杀剂,粘度1000〜3000cps,厚度为12μm干燥
001)

存储时期(保质期): 2年如果在 +10°C至 +20°C下储存,相对湿度为50%,在原始包装中,远离阳光直射,干净和干燥的地方

耐用性/保修: 数据表 (单击链接)

应用: 从 +17°C到 +18°C,使用率从-45°C到 +45°C

 

释放力(N/25mm): Standart:0.10-0.30,结果:0,17(23℃,54%H)

初始大头钉(g/25mm): 测试方法:GB31125-2014:Standart 800-1500,结果:840 (23℃,54%H)

180°果皮强度(N/25mm): 测试方法:GB/T2792-1998:Standart≥6.8,结果:8,7 (23℃,54%H)

粘附力:测试方法:GB/T4851-1998,Standart≥60,结果70(无移动)

    衰老(65℃,7天): Standart-没有粘合残留的高温释放,结果:无粘合残留

    衰老(-65℃,十天): Standart-低- 温度释放而没有粘合残留物,结果:无粘合残留

    推荐的应用工具: 挤压,缓冲,刀,掩蔽胶带,加热枪,磁铁,手套,IRR温度计,IRR加热器

    应用方法: 对硬化膜的标准方法。没有过度拉伸。加热后

    加热温度: 100°C

    治愈时间: 超过十°C的24小时

    AfterCare: pH中性。避免蜡或溶剂

    方向: 是的

    工具:带缓冲区的软挤压器

    安装前应将保护帽剥落。

    重要说明: 屏幕的图像,颜色和饰面是近似的。对于产品的真实表示形式,请务必检查颜色色板。相同生产批号的滚动应用于完成包装作业,因为可能会发生少量的颜色变化。这部电影可能在申请书中或一天的使用中刮擦。保修不涵盖电影的刮擦。

    Features

    Film construction

    • Film type: Premium-grade polymeric multilayered hybrid with air-release channels
    • Film thickness: 122 µm
    • Liner thickness: 142 µm plastic
    • Adhesive: Henkel solvent-based acrylic, transparent, viscosity 1000–3000 cps, 12 µm dry
    • Finish: Gloss metallic, directional
    • Roll width: 1.52 m (5 ft)
    • Full roll length: 18 m (59 ft)

    Performance

    • Peel strength: 8.7 N/25mm (standard ≥6.8)
    • Initial tack: 840 g/25mm (standard 800–1500)
    • Release force: 0.17 N/25mm (standard 0.10–0.30)
    • Adhesion: 70 (standard ≥60, no shifting)
    • Aging tested: -65°C to +65°C, no residue
    • Storage: 2 years at +10°C to +20°C, 50% RH, dry conditions

    Warranty

    Standard TeckWrap limited warranty. Scratches not covered. Use same production LOT for color consistency across panels.

    Application

    • Apply at +17°C to +18°C
    • Service range: -45°C to +45°C
    • Tools: squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer, IR heater
    • Conformability: smooth and medium-curved surfaces
    • Post-heat: 100°C
    • Cure: 24 hrs above 10°C (48 hrs at room temperature recommended)
    • Overlap: 3–4 mm
    • Directional film, check orientation before cutting
    • Avoid overstretching during application
    • Remove protective cap before install
    • Aftercare: pH-neutral products only, avoid waxes and harsh solvents

    Disclaimer

    All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of products for their purpose.

    TeckWrap products are warranted to be free of defects in material for the period of shelf life. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.

    Warranty does not cover normal wear, transportation, labor, or consequential damages.

    Screen images may vary, refer to physical color swatches. Use same production LOT for color consistency. Scratches during application or daily use are not covered.