粉红色金（GAL23-HD）乙烯基包裹

Film construction

• Film type: Advanced polymeric multilayered with silver coating and air-release channels
• Film thickness: 132 µm
• Liner thickness: 180 µm plastic
• Adhesive: Henkel solvent polyacrylate, transparent, viscosity 1000–3000 cps, 12 µm dry
• Finish: Gloss metallic aluminum, directional
• Roll width: 1.52 m (5 ft)
• Full roll length: 18 m (59 ft)

Performance

• Peel strength: 9.7 N/25mm (standard ≥7.85)
• Initial tack: 1055 g/25mm (standard 800–1500)
• Release force: 0.1 N/25mm (standard 0.10–0.30)
• Adhesion: 70 (standard ≥60, no shifting)
• Aging tested: -65°C to +65°C, no residue
• Storage: 2 years at +10°C to +20°C, 50% RH, dry conditions

Warranty

Standard TeckWrap limited warranty. Scratches not covered. Use same production LOT for color consistency across panels.

• Apply at +17°C to +18°C
• Service range: -45°C to +45°C
• Soft squeegee with buffer
• Conformability: smooth and medium-curved surfaces
• Post-heat: 100°C flat surfaces, 120°C curves and overlaps
• Cure: 24 hrs above 15°C (48 hrs at room temperature recommended)
• Overlap: 3–4 mm
• Directional film, check orientation before cutting
• Remove protective cap before install
• Aftercare: pH-neutral products only, avoid hot wax or solvents

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of products for their purpose.

TeckWrap products are warranted to be free of defects in material for the period of shelf life. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.

Warranty does not cover normal wear, transportation, labor, or consequential damages.

Screen images may vary, refer to physical color swatches. Use same production LOT for color consistency. Scratches during application or daily use are not covered.