Sku: CM02-MS-5M

粒状黑色(CM02-MS)乙烯基包裹

正常价格 ¥1,310.00
船运 在结帐时计算。

描述

teckwrap粒状黑色不是典型的黑色。它略有刻板印象,揭示了不同的色调,这是灵活性的绝佳选择。

Teckwrap借助四种纯色,为您提供了这一系列的超级哑光乙烯基包裹,这使您的车辆具有微妙的外观。作为一名骄傲的供应商,Teckwrap拥有大量的电影选择,具有良好的合格性和耐用性。该材料足够拉伸,可以轻松包裹每个边缘和凹入区域。

规格

电影的厚度是 0.12mm
带有释放衬里的膜的厚度: 0.28mm
电影类型: 带空气释放通道的中级聚合日历膜

系列: 180系列

粘合剂: 汉克尔溶剂基丙烯酸粘合剂,透明,耐超杀剂,粘度1000〜3000cps,厚度为12μm干燥
释放衬里: Felix Schoeller释放衬里 / 20-104-20-1,9印刷,双侧PE涂层牛皮。一侧无溶剂涂有硅树脂的空气释放(ISO 9001,ISO 140001,OHSAS 18001)
存储期:  3年如果将 +10°至 +20°存储在原始包装中,相对湿度为50%,远离阳光直射,在干净干燥的地方。
耐用性/保修: 数据表 (单击链接)
维度稳定性: 收缩小于0.20%
塑料:在25%-32%之间
打破力量: 30.7 N/10mm(平均)测试方法:ASTM D3759/D3759M-05180º去皮强度,钢板:9 N/10mm(平均)测试方法:ASTM D3330/D3330-04

紫外线暴露的光老化:
测试方法ASTM D4329-13周期A&ISO 105-A02:1993/COR.2:2005,测试结果:4-5/暴露周期:ASTM D4329-13周期A,灯类型:UVA-3408H uv at(60±2.5) (50±2.5)℃bpt,暴露时间:48h

安装提示:

温度:从 +18°到20°,用法从-30°到 +30°
工具:带软缓冲区的标准挤压器
合格性:光滑和中曲面
方向:是的
重叠宽度:3-4mm

包裹: 卷宽152厘米,长度18 m,重量13公斤

安装前应将保护帽剥落。

重要说明: 屏幕的图像,颜色和饰面是近似的。对于产品的真实表示形式,请务必检查颜色色板。相同生产批号的滚动应用于完成包装作业,因为可能会发生少量的颜色变化。这部电影可能在申请书中或一天的使用中刮擦。电影的刮擦不被保修所覆盖。 

Features

Film construction

  • Film type: Premium polymeric hybrid with air-release channels and grainy matte finish
  • Film thickness: 0.12 mm (120 µm)
  • Total thickness with liner: 0.28 mm
  • Liner: Double-side PE-coated Kraft, solventless silicone coating, air-release (ISO 9001, ISO 14001, OHSAS 18001)
  • Adhesive: Henkel solvent-based acrylic, transparent, viscosity 1000–3000 cps, 12 µm dry
  • Finish: Super matte grainy black, directional
  • Roll width: 152 cm (5 ft)
  • Full roll length: 18 m
  • Roll weight: 13 kg

Performance

  • Breaking strength: 30.7 N/10mm avg. (ASTM D3759)
  • Peel strength (180°): 9 N/10mm avg. (ASTM D3330)
  • Dimensional stability: less than 0.20% shrinkage
  • Plastification: 25%–32%
  • UV resistance: 4–5 Pass (ASTM D4329-13 Cycle A, ISO 105-A02)
  • UV test conditions: UVA-340, 8h UV at 60°C + 4h condensation at 50°C, 48h

Warranty

Standard TeckWrap limited warranty. Scratches not covered. Use same production LOT for color consistency across panels.

Application

  • Apply at +17°C to +23°C
  • Service range: -30°C to +30°C
  • Standard squeegee with soft buffer
  • Conformability: smooth and medium-curved surfaces
  • Cure: 24 hrs (48 hrs recommended)
  • Overlap: 3–4 mm
  • Directional film, check orientation before cutting
  • Remove protective cap before install
  • Matte finish requires extra care during cleaning, use matte-safe cleaners only

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of products for their purpose.

TeckWrap products are warranted to be free of defects in material for the period of shelf life. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.

Warranty does not cover normal wear, transportation, labor, or consequential damages.

Screen images may vary, refer to physical color swatches. Use same production LOT for color consistency. Scratches during application or daily use are not covered.