Sku: CG59-HD-5M

冰糕粉红色(CG59-HD)乙烯基包裹

(1)
正常价格 ¥1,583.00
船运 在结帐时计算。

描述

介绍 冰糕粉红色乙烯基包裹 TeckWrap(TeckWrap)是汽车爱好者和专业人士的最终选择,他们寻求充满活力的高光泽效果,并具有出色的性能。无论您是在活动中定制乘车还是在活动中展示它,此包装都可以提供无与伦比的光彩和质量。

关键功能

  • 超光完成:通过完美无瑕的镜面表面实现类似油漆的外观,可增强车辆的美感。
  • 耐用和持久:由优质聚合物乙烯基制成,可抵抗紫外线,划痕和环境磨损。
  • 多功能设计:设计为毫不费力地符合平坦,弯曲和中等复杂的表面,为各种车辆轮廓提供了灵活性。
  • 保护层:宠物保护帽在处理和施用过程中屏蔽乙烯基(在加热之前卸下)。
技术数据
  • 材料:带有金属色素的多层高晶乙烯基薄膜。
  • 薄膜厚度:110微米
  • 释放衬里:独特的塑料衬里,可增强膜的光泽和反射特性。带有空气释放通道。
  • 可拉伸性:使用热量最高20%,适用于中等复杂曲线。
  • 粘合剂类型:Henkel的高质量基于溶剂的丙烯酸粘合剂,具有出色的天气抗性。
  • 室外耐用性:3 - 5年可靠的性能。
  • 申请方法:仅干燥申请。 
  • 建议的温度:最低施用温度为 +17°C( +63°F)。用法从-35°C到 +35°C
  • 存储时期(保质期): 2年如果在 +10°C至 +20°C下储存,相对湿度为50%,在原始包装中,远离阳光直射,干净和干燥的地方
  • 尺寸选项:5英尺x 9.8英尺,5英尺x 16英尺,5英尺x 33英尺,5英尺x 49英尺,5英尺x 59英尺

申请准则

为了确保最佳结果,建议采用以下步骤:

  • 准备:在涂抹之前,请确保表面干净,光滑,没有蜡或油脂。
  • 拆除保护帽: 在应用之前,请剥离防护宠物盖,并在没有防护帽的情况下存放胶片以防止“隧道”。
  • 安装:使用 软缓冲挤压器的光滑效果并施加加热以使其紧密曲线和边缘。在施用前后,不要过度伸展材料,加热后,并将车辆在室内20°C以上24-48小时保持。
  • 护理:用温和的肥皂和水洗涤以保持饰面。避免磨料材料。
  • 加热温度:95°C。 施加后加热至关重要。
  • 推荐的应用工具:挤压,缓冲,刀,掩蔽胶带,热枪,磁铁,手套,IRR温度计,IRR加热器
  • 乙烯基膜是方向性的。

重要的考虑因素

颜色一致性:虽然我们努力准确地表示颜色,但屏幕显示中的变化可能会影响感知。有关精确的颜色匹配,请咨询我们的 物理色板书。
批量匹配: 为避免音调略有差异,请确保单个项目中使用的卷来自同一生产。
维护:虽然这部电影抵制了较小的划痕和环境磨损,但定期清洁和维护将有助于保留其光滑的光洁度。 

冰糕粉红色的乙烯基包裹结合了美学,耐用性和易用性,使其成为专业人士和DIY爱好者的首选。无论是改变个人车辆还是为品牌制作准备舰队,这部高光泽的电影都会印象深刻。 

Features

Film construction

  • Film type: Premium polymeric hybrid with air-release channels and Super Gloss HD finish
  • Film thickness: 110 µm
  • Liner thickness: 142 µm plastic (HD high-gloss)
  • Adhesive: Henkel solvent-based acrylic, ultra-weather-resistant, viscosity 1000–3000 cps, 12 µm dry
  • Top layer: PET protective layer (peel before heating)
  • Roll width: 5ft (1,52m)
  • Full roll length: 59ft (18 m)

Performance

  • Service temperature: -35°C to +35°C
  • Release force: 0.18 N/25mm (standard 0.10–0.30)
  • Initial tack: 1015 g/25mm (standard 800–1500, GB31125-2014)
  • Peel strength (180°): 8.1 N/25mm (standard ≥4.9, GB/T2792-1998)
  • Adhesion strength: 70 (standard ≥60, no shifting, GB/T4851-1998)
  • Aging tested: -65°C to +65°C, no residue
  • Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight.

Warranty

  • Built for long-term outdoor use, up to 3 years outdoor durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Heat-removable, with minimal adhesive residue when removed within the recommended three years.

Application

  • Application temperature: +17°C to +23°C
  • Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer, IR heater
  • Conformability: smooth and medium-curved surfaces
  • Post-heat: 95–100°C (gloss finish)
  • Cure: 24 hrs above 10°C (48 hrs at room temperature recommended)
  • Overlap: 3–4 mm
  • Non-directional film
  • Avoid overstretching during application
  • Remove the protective cap before installing
  • Aftercare: pH-neutral products only, avoid hot wax or strong solvents

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of the products for their purpose.


TeckWrap products are warranted to be free of defects in materials for the shelf life period. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.
Warranty does not cover normal wear, transportation, labor, or consequential damages.
Screen images may vary; refer to physical color swatches. Use the same production LOT for color consistency. Film must be stored without the protective layer to prevent tunneling. Scratches during application or daily use are not covered.