SKU: BM04-5M

Envolvimento em vinil preto com efeito de fibra de carbono escovada (BM04)

(1)
Preço normal R$ 988,00
Os custos de envio são calculados aquando da finalização da compra.

Descrição

O Preto Escovado (BM04) é um acabamento em preto grafite ultra-escuro que apresenta uma textura direcional de metal escovado, imitando superfícies metálicas finamente usinadas. Situando-se entre o preto acetinado, o cinza-chumbo e o titânio escuro, confere uma aparência distintamente técnica e industrial que se destaca imediatamente dos filmes convencionais brilhantes, mate ou acetinados.

Características
principais

  • Grão direcional de metal escovado: uma textura linear autêntica que imita metal finamente usinado, não um efeito pintado ou impresso.
  • Situa-se numa gama tonal própria: posicionado entre o preto acetinado, o cinzento-chumbo e o titânio escuro, transmite uma sensação técnica e industrial, em vez de um mate liso padrão.
  • Textura consistente em todos os painéis: película híbrida polimérica de alta qualidade com canais de libertação de ar; mantém a orientação e o lote de produção alinhados em todo o veículo para evitar discrepâncias na textura.
  • Adesivo concebido para uma remoção limpa: acrílico à base de solvente da Henkel, resistente às intempéries, removível a quente no prazo de 2 anos com resíduos mínimos.
  • Aplicação em detalhes e guarnições: concebido para spoilers, espelhos retrovisores, tejadilhos e guarnições, em vez de cobertura total da carroçaria; recomenda-se vivamente a instalação por profissionais, com cuidados pós-aplicação específicos para a textura

À sombra e em condições de céu nublado, o BM04 apresenta-se quase preto com tons de carvão, criando uma presença discreta e sofisticada. À medida que a luz solar atinge a superfície, a textura escovada torna-se mais pronunciada, revelando suaves reflexos de grafite e titânio que seguem a direção do grão. Isto cria movimento e dimensionalidade sem recorrer a brilhos metálicos ou reflexos de brilho.

Cor correspondente à do fabricante

Não há qualquer tecido de carbono ou cor de pintura a servir de referência aqui, pelo que o ponto de comparação é o veio e o tom em relação a acabamentos de metal escovado reconhecíveis, tanto de fábrica como do mercado de acessórios:

  • Gama tonal semelhante aos pacotes de acabamentos de fábrica «Gunmetal» e «Titanium Gray» da Audi, BMW e Mercedes-Benz
  • Características de grão comparáveis às dos kits de acabamentos em alumínio escovado comuns do mercado pós-venda (molduras das janelas, capas dos espelhos)
  • Aparência mais próxima do metal maquinado do que um revestimento preto mate padrão, sem o brilho de um acabamento com partículas metálicas

Se um cliente pretender o aspeto «técnico e usinado» dos acabamentos frequentemente associado a pacotes de detalhes em alumínio escovado ou «Gunmetal», o «Brushed Black» (BM04) proporciona isso em qualquer painel; é o revestimento a escolher quando o «Noir Black» ou o «Pitch Black Carbon» parecem demasiado texturados ou com aspeto de tecido para o que o cliente realmente pretende.

Features

Film construction

  • Film type: premium-grade polymeric hybrid film with air-release channels
  • Film thickness: 0.16 mm
  • Liner thickness: 0.13 mm
  • Total thickness with liner: 0.29 mm
  • Liner: transparent plastic release liner with air-release grid pattern
  • Adhesive: Henkel solvent-based acrylic, transparent, ultra weather-resistant, 1000 to 3000 cps viscosity, 12 μm dry
  • Finish: brushed metal texture (carbon brushed), directional
  • Roll width: 1.52 m (5 ft)
  • Roll length: 18 m (59 ft)
  • Roll weight: 14 kg

Performance

  • Service temperature: -35°C to +35°C
  • Dimensional stability: shrinkage less than 2%
  • Storage: 2 year shelf life at +10°C to +20°C, 50% relative humidity, in original packaging, away from direct sunlight

Warranty

This is an accent and trim film for partial application. Used on spoilers, mirrors, roofs, and interior trim, it is built for long-term use with up to 3 years of durability on vertical surfaces and around 2 years on a full panel, depending on climate zone. The warranty covers manufacturing defects such as bubbling, cracking, and adhesive failure when the film is properly stored, professionally installed, and maintained per the care guidance. It does not cover abrasion, scratches, gloss change, or normal wear. Heat-removable within 2 years for the cleanest removal, with minimal adhesive residue.

Application

  • Best suited to partial and accent application: spoilers, mirrors, roofs, door trim, and interior elements.
  • Surface: apply only to a clean, sound, fully cured OEM factory finish. Repainted, primed, aftermarket, or damaged surfaces can affect adhesion and removal and fall outside warranty coverage.
  • Application temperature: +17°C to +23°C
  • Tools: standard squeegee with soft buffer, heat gun, knife, masking tape, gloves
  • Conformability: smooth and medium-curved surfaces
  • Directional film. The brushed grain runs in one direction, so keep orientation consistent across all panels and use one production LOT per vehicle to avoid texture mismatch between panels.
  • Overlap: 3 to 4 mm
  • Avoid overstretching during application, which can distort the brushed texture
  • Post-heat: 100°C
  • Remove the protective cap before installing
  • Professional installation strongly recommended for the best result and to keep the warranty valid
  • Aftercare: hand wash with a pH-neutral shampoo (pH 3 to 11). The brushed grain can trap dirt, so rinse thoroughly and dry along the grain direction. Avoid waxes, solvents, and petroleum-distillate products, and never use automatic washes, brushes, or high-pressure washers.

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of the products for their purpose.

TeckWrap products are warranted to be free of defects in material for the period of shelf life. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.

Warranty does not cover normal wear, transportation, labor, or consequential damages. Coverage requires proper storage, professional installation, and maintenance in line with TeckWrap's care guidance, and does not apply to films installed on non-OEM, repainted, or damaged surfaces. If you notice cracking, lifting, edge failure, or other defects, contact your installer promptly for assessment.

The brushed texture is more sensitive to abrasion within the grain and can trap dirt more readily than a flat finish. This is a normal characteristic of a textured film and is not covered.

Removal from aged, repainted, or poorly bonded factory paint may lift paint or clear coat. TeckWrap is not responsible for the condition of the underlying paint upon removal.

Screen images may vary, refer to physical color swatches. Use the same production LOT for color consistency. Scratches during application or daily use are not covered.