Sku : CSC04-16M

반사 캐스트 크롬 (CSC/CMC)

정가 ₩2,128,000
해운 결제시 계산.

설명

은 코팅이있는 적합성 캐스트 크롬 재료. 자동차 포장 (또는 매끄럽거나 중간 정도의 표면)에 적합합니다. 독특한 외관을 만들고 자동차의 미학을 개선하기 위해 8 가지 반사 색상으로 제공됩니다. 증기 진공 또는 IRR 히터로 설치하는 것이 좋습니다.

필름의 두께 : 90 ± 5μm 

릴리스 라이너가있는 필름의 두께 : 245 ± 5μm

영화 유형 : 공기 방출 채널로 비닐 필름을 주조하십시오

저장 기간 : 3 년은 -20 ℃에서 +65 ℃에서 저장되면 원래 패키지에서 상대 습도가 50%, 직사광선에서 멀어지면 깨끗하고 건조한 장소

애플리케이션: -20에서 +65 ℃에서 ≥ +10 ℃에서 사용합니다

치수 안정성 : 0,10% 미만의 수축

패키지: 롤 너비 152cm, 길이 16m

중요한 참고 :

화면의 이미지, 색상 및 마감은 대략적입니다. 제품의 정확한 표현을 위해 항상 견본 색상을 확인하십시오. 동일한 생산 로트 번호의 롤을 사용하여 랩 작업을 완료하는 데 사용되어야합니다. 금속화 된 필름을 조심스럽게 처리해야합니다. 금속화 된 층의 모양이 구겨지고, 과도한 가열 및 너무 강력한 가열시 변화 될 수 있으므로. 영화는 응용 프로그램 또는 유입 당일 동안 긁힐 수 있습니다. 필름의 긁힘은 보증에 적용되지 않습니다.

Features

Film construction

  • Film type: Cast vinyl film with silver coating and air-release channels
  • Film thickness: 90 ± 5 µm
  • Total thickness with liner: 245 ± 5 µm
  • Finish: Chrome reflective, directional
  • Roll width: 152 cm (5 ft)
  • Full roll length: 16 m

Performance

  • Dimensional stability: less than 0.10% shrinkage
  • Storage shelf life: 2 years at -20°C to +65°C, 50% RH, dry conditions, away from sunlight

Warranty

Standard TeckWrap limited warranty. Scratches and damage to the metalized layer from overstretching, crumpling, or excessive heat not covered. Use same production LOT for color consistency across panels.

Application

  • Apply at +17°C to +23°C
  • Service range: ≥+10°C
  • Tools: standard squeegee with soft buffer, steam vacuum or IR heater recommended
  • Conformability: smooth and medium-curved surfaces
  • Best for partial wraps and accents, not recommended for full vehicle coverage
  • Avoid overstretching and excessive heat that can damage the metalized layer
  • Cure: 24 hrs (48 hrs recommended)
  • Directional film, check orientation before cutting
  • Handle carefully, the chrome surface can scratch during install

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of products for their purpose.

TeckWrap products are warranted to be free of defects in material for the period of shelf life. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.

Warranty does not cover normal wear, transportation, labor, or consequential damages.

Chrome films require careful handling. Crumpling, overstretching, and excessive heat can permanently damage the metalized layer. Screen images may vary, refer to physical color swatches. Use same production LOT for color consistency. Scratches during application or daily use are not covered.