Sku : RB38-HD-18M

광택 메탈릭 퍼플 블루 비닐 랩 (RB38-HD)

(1)
정가 ₩910,000
해운 결제시 계산.

설명

대부분의 짙은 보라색 랩은 빛이 약해지면 검은색으로 변해갑니다. 하지만 ‘퍼플 블루’는 그렇지 않습니다. 이 색상은 풍부한 보라색 바탕을 유지하면서, 밝은 대낮부터 저녁까지 짙은 파란색의 메탈릭 플레이크가 선명하게 드러납니다.

주요 특징

  • 그늘에서도 선명하게 드러나는 깊이: 사파이어 블루 메탈릭 플레이크가 가미된 짙은 보라색은 직사광선 아래뿐만 아니라 그늘에서도 생동감 있는 색상을 유지합니다.
  • 선명한 광택과 투명도: 고분자 다층 하이브리드 필름과 미세한 메탈릭 안료가 선명한 반사 효과를 만들어내며, 색상 표현이 깔끔합니다.
  • 친환경 성분: 헨켈(Henkel)의 용제형 아크릴 접착제는 투명성을 유지하며, 내후성이 뛰어나고, 제거 시 잔여물 없이 깔끔하게 벗겨집니다.
  • 매끄러운 시공: 프리미엄 PET 이형 라이너가 필름을 평평하게 유지하여 정확한 위치 지정과 거울처럼 매끄러운 마감을 보장합니다.
  • 열 성형 가능: 열을 가하면 부드러워져 거울, 모서리, 곡선 및 적당한 오목한 부분에도 깔끔하게 밀착됩니다.
  • 도장 표면을 손상시키지 않는 제거: 제거 가능한 접착제가 공장 출고 시의 도장 마감을 보호하며, 나중에 색상을 자유롭게 변경할 수 있게 해줍니다.

퍼플 블루는 짙은 바이올렛의 풍부함과 사파이어 블루의 시원한 느낌을 조화시킵니다. 흐린 하늘이나 저녁 빛 아래에서는 푸른 빛이 감도는 깊고 세련된 보라색을 띱니다. 햇빛이 표면에 닿으면 미세한 메탈릭 플레이크가 모든 패널에 걸쳐 빛을 반사합니다. 바이올렛 톤이 밝아지고, 차체 라인을 따라 블루 펄이 드러나며, 메탈릭 입자가 평면적인 도장 마감과는 달리 진정한 입체감을 선사합니다. 일반적인 애프터마켓 퍼플 차량 옆에 주차해 보면 그 차이가 단번에 눈에 띕니다. 퍼플 블루는 프리미엄 공장 출고 메탈릭 마감에서 기대할 수 있는 선명함과 균형감을 갖추고 있습니다.

OEM 매치

  • 벤틀리 댐슨(Bentley Damson
    )에 가장 근접
  • BMW 트와일라이트 퍼플 메탈릭과 동일한 채도
  • 포르쉐 아메시스트 메탈릭보다 더 깊은 색감
  • 메르세데스-벤츠 오브시디언 블랙 메탈릭보다 톤이 더 차갑습니다

벤틀리나 BMW에서 볼 수 있는 풍부한 순정 퍼플 색상을 좋아하시나요? 퍼플 블루는 AMG GT, F-Type, C8, 모델 3는 물론 도로 위 거의 모든 차량에 그와 같은 세련된 메탈릭 감성을 선사합니다.

Features

Film construction

  • Film type: premium-grade polymeric multilayered hybrid vinyl with air-release channels
  • Film thickness: 122 μm
  • Release liner thickness: 142 μm plastic
  • Series: 190 Series
  • Roll size: 1.52 m × 18 m (59.8" × 708.6")
  • Material: conformable polymeric vinyl with stable color pigments
  • Adhesive: Henkel solvent-based acrylic adhesive, transparent and ultra weather resistant, 1000 to 3000 cps viscosity, 12 μm dry thickness

Performance

  • Service temperature: -35°C to +35°C
  • Release force: 0.17 N/25mm (standard 0.10 to 0.30)
  • Initial tack: 840 g/25mm (standard 800 to 1500)
  • Peel strength (180°): 8.7 N/25mm (standard ≥ 6.8)
  • Adhesion strength: 70 (standard ≥ 60, no shifting)
  • High temperature aging (65°C, 7 days): no adhesive residue
  • Low temperature aging (-65°C, 10 days): no adhesive residue

Warranty
Built for long-term outdoor use, up to 3 years outdoor durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Heat-removable, with minimal adhesive residue when removed within the recommended three years.

Application

  • Application temperature: +17°C to +23°C
  • Tools: squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer, IR heater
  • Conformability: smooth and medium-curved surfaces
  • Post-heat: 100°C
  • Cure: 24 hrs above 10°C (48 hrs at room temperature recommended)
  • Overlap: 3–4 mm
  • Directional film, check orientation before cutting
  • Avoid overstretching during application
  • Remove protective cap before install
  • Aftercare: pH-neutral products only, avoid waxes and harsh solvents

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of products for their purpose.

TeckWrap products are warranted to be free of defects in material for the period of shelf life. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.

Warranty does not cover normal wear, transportation, labor, or consequential damages.

Screen images may vary, refer to physical color swatches. Use same production LOT for color consistency. Scratches during application or daily use are not covered.