Sku : CG48-HD-5M

고광택 스페인 라벤더 비닐 랩 (CG48-HD)

(8)
정가 ₩332,000
해운 결제시 계산.

설명

파스텔 톤의 보라색은 밝은 햇빛 아래에서 종종 분필처럼 밋밋하거나 플라스틱 같은 느낌을 주곤 합니다. TeckWrap 하이 글로스 스페인 라벤더는 맑은 날부터 흐린 오후까지 우유빛 깊이와 부드러운 라벤더 특유의 색감을 그대로 유지합니다.  

주요 특징

  • 크리미한 파스텔 톤: 유백색 바탕에 부드러운 라벤더-바이올렛 색상이 어우러져, 지나치게 분홍빛이나 파란빛이 도는 대신 매끄러운 색감을 유지합니다. 
  • 진주 같은 광택: 폴리머 다층 하이브리드 필름이 풍부한 반사 효과를 만들어내어, 두꺼운 메탈릭 플레이크에 의존하지 않고도 마감에 은은한 깊이감을 더합니다. 
  • 깔끔한 시공: 공기 배출 채널이 시공 중 갇힌 공기를 밀어내어, 곡선부와 차체 라인에 기포가 생기지 않도록 합니다.
  • 악천후에도 견디는 접착력: 헨켈(Henkel)의 용제형 아크릴 접착제는 투명함을 유지하며, 변화하는 날씨 속에서도 가장자리가 들뜨지 않고 견고하게 고정됩니다.  
  • 차체 라인에 최적화: 제어된 열을 가해 미러, 곡면, 범퍼 및 적당히 오목한 패널을 감싸듯 시공할 수 있습니다.
  • 잔여물 없이 제거: 접착제가 공장 출고 시 마감 처리를 손상시키지 않고 깔끔하게 분리됩니다.

스페인 라벤더는 짙은 보라색도, 파스텔 핑크도 아닙니다. 유백색 바탕 덕분에 이 두 색상 사이의 어딘가에 위치하며, 색상에 깔끔하고 디지털적인 느낌을 줍니다. 움직이는 빛 아래에서 반사되는 빛은 날카롭기보다는 크림처럼 부드러워져, 광택이 나는 도자기에 더 가깝습니다. 직사광선이 없어도 안정적이고 절제된 부드러움을 유지합니다. 빛이 바뀔 때마다 색상의 성격이 변하지 않고, 항상 차분한 느낌을 유지합니다.

OEM 색상 일치

  • 닛산 피가로 라벤더에 가장 가깝습니다.
  • 포르쉐 문스톤보다 더 부드러운 색상입니다.
  • 포르쉐 문젬과 채도가 동일합니다.

닛산은 수십 년 전 피가로 생산을 중단했습니다. 이 랩핑은 그 파스텔 라벤더 색상을 모델 Y, 아이오닉 5, 폴스타 2에 재현해 줍니다.

Features

Film construction

  • Film type: Premium polymeric hybrid with air-release channels and Super Gloss HD finish
  • Film thickness: 110 µm
  • Liner thickness: 142 µm plastic (HD high-gloss)
  • Adhesive: Henkel solvent-based acrylic, ultra-weather-resistant, viscosity 1000–3000 cps, 12 µm dry
  • Top layer: PET protective layer (peel before heating)
  • Roll width: 5ft (1,52m)
  • Full roll length: 59ft (18 m)

Performance

  • Service temperature: -35°C to +35°C
  • Release force: 0.18 N/25mm (standard 0.10–0.30)
  • Initial tack: 1015 g/25mm (standard 800–1500, GB31125-2014)
  • Peel strength (180°): 8.1 N/25mm (standard ≥4.9, GB/T2792-1998)
  • Adhesion strength: 70 (standard ≥60, no shifting, GB/T4851-1998)
  • Aging tested: -65°C to +65°C, no residue
  • Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight.

Warranty

  • Built for long-term outdoor use, up to 3 years outdoor durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Heat-removable, with minimal adhesive residue when removed within the recommended three years.

Application

  • Application temperature: +17°C to +23°C
  • Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer, IR heater
  • Conformability: smooth and medium-curved surfaces
  • Post-heat: 95–100°C (gloss finish)
  • Cure: 24 hrs above 10°C (48 hrs at room temperature recommended)
  • Overlap: 3–4 mm
  • Non-directional film
  • Avoid overstretching during application
  • Remove the protective cap before installing
  • Aftercare: pH-neutral products only, avoid hot wax or strong solvents

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of the products for their purpose.


TeckWrap products are warranted to be free of defects in materials for the shelf life period. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.
Warranty does not cover normal wear, transportation, labor, or consequential damages.
Screen images may vary; refer to physical color swatches. Use the same production LOT for color consistency. Film must be stored without the protective layer to prevent tunneling. Scratches during application or daily use are not covered.