Sku : CG43-HD-18M

고광택 루브르 옐로우 비닐 랩 (CG43-HD)

(2)
정가 ₩909,000
해운 결제시 계산.

설명

밝은 노란색은 종종 형광색으로 넘어가거나, 빛의 변화에 따라 녹색 기가 도는 경우가 많습니다. TeckWrap의 ‘루브르 옐로우’는 유럽 스포츠카의 도장 마감에서 볼 수 있는 깔끔한 레몬 래커 색조와 선명한 광택을 그대로 유지합니다.  

주요 특징

  • 어떤 조명 아래에서도 변함없는 색상: 주행 중이거나 조명이 변할 때에도 녹색이나 형광색으로 변하지 않고 선명한 노란색 톤을 유지합니다. 
  • 높은 광택과 선명도: 폴리머 다층 하이브리드 필름이 매끄럽고 래커 같은 표면을 형성하여 선명한 반사 효과를 선사합니다. 
  • 잔여물 없이 깔끔하게 제거되는 접착제: 헨켈(Henkel)의 용제형 아크릴 접착제는 잔여물 없이 제거되며, 비, 열, 자외선 노출에도 견딥니다.  
  • 기포 없는 시공: 공기 배출 채널이 갇힌 공기를 바깥쪽으로 밀어내어 랩이 패널에 평평하게 밀착되도록 돕습니다.
  • 열 성형 가능 필름: 모서리가 들뜨지 않고 거울, 가장자리, 적당히 오목한 패널까지 래핑할 수 있습니다.

TeckWrap의 ‘루브르 옐로우’는 지나치게 채도가 높은 애프터마켓 옐로우 색상보다는 갓 칠한 레몬 래커의 느낌을 재현합니다. 광택은 선명한 반사 효과를 유지하며, 색상은 어떤 각도에서 보더라도 깨끗하고 밝은 특성을 잃지 않습니다. 구름이 끼거나 그늘진 곳에서도 색조가 녹색으로 변하지 않고 레몬 본연의 색감을 유지합니다. 형광 노란색과 나란히 놓으면 그 차이가 확연히 드러납니다. 이 색상은 거슬리지 않으면서도 마치 공장 출고 시 도장된 것처럼 보입니다.   

OEM 색상 일치

  • 페라리 지알로 모데나(488, F8 트리뷰토)에 가장 가깝습니다. 
  • 포르쉐 레이싱 옐로우와 동일한 채도.
  • 람보르기니 지알로 테네리페보다 밝습니다.
  • 코르벳 컴피티션 옐로우보다 더 밝습니다. 
  • 르노 스포츠 리퀴드 옐로우(메간 RS)보다 더 스포티합니다. 

이처럼 독보적인 공장 도색은 대개 가장 유명한 고성능 모델에만 한정되어 있습니다. TeckWrap의 하이 글로스 루브르 옐로(High Gloss Louvre Yellow)를 사용하면 어떤 스포츠 쿠페, 세단, SUV라도 이 선명한 노란색 마감을 연출할 수 있습니다.

Features

Film construction

  • Film type: Premium polymeric hybrid with air-release channels and Super Gloss HD finish
  • Film thickness: 110 µm
  • Liner thickness: 142 µm plastic (HD high-gloss)
  • Adhesive: Henkel solvent-based acrylic, ultra-weather-resistant, viscosity 1000–3000 cps, 12 µm dry
  • Top layer: PET protective layer (peel before heating)
  • Roll width: 5ft (1,52m)
  • Full roll length: 59ft (18 m)

Performance

  • Service temperature: -35°C to +35°C
  • Release force: 0.18 N/25mm (standard 0.10–0.30)
  • Initial tack: 1015 g/25mm (standard 800–1500, GB31125-2014)
  • Peel strength (180°): 8.1 N/25mm (standard ≥4.9, GB/T2792-1998)
  • Adhesion strength: 70 (standard ≥60, no shifting, GB/T4851-1998)
  • Aging tested: -65°C to +65°C, no residue
  • Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight.

Warranty

  • Built for long-term outdoor use, up to 3 years outdoor durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Heat-removable, with minimal adhesive residue when removed within the recommended three years.

Application

  • Application temperature: +17°C to +23°C
  • Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer, IR heater
  • Conformability: smooth and medium-curved surfaces
  • Post-heat: 95–100°C (gloss finish)
  • Cure: 24 hrs above 10°C (48 hrs at room temperature recommended)
  • Overlap: 3–4 mm
  • Non-directional film
  • Avoid overstretching during application
  • Remove the protective cap before installing
  • Aftercare: pH-neutral products only, avoid hot wax or strong solvents

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of the products for their purpose.


TeckWrap products are warranted to be free of defects in materials for the shelf life period. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.
Warranty does not cover normal wear, transportation, labor, or consequential damages.
Screen images may vary; refer to physical color swatches. Use the same production LOT for color consistency. Film must be stored without the protective layer to prevent tunneling. Scratches during application or daily use are not covered.