Sku : RB26-HD-5M

광택 메탈릭 루비 그린 비닐 랩 (RB26-HD)

(9)
정가 ₩332,000
해운 결제시 계산.

설명

당사의 글로스 메탈릭 비닐 랩은 매끄럽고 고광택 마감 처리가 되어 있으며, 공기 배출 채널이 완비된 고품질 폴리머 다층 캘린더링 비닐 필름으로 제작되었습니다. 글로스 메탈릭 랩은 내구성이 뛰어나고 밀착성이 우수하여, 차량의 모든 모서리와 오목한 부분까지 쉽게 감쌀 수 있을 만큼 신축성이 뛰어납니다.  또한 글로스 메탈릭은 안전한 용제형 폴리아크릴레이트 접착제를 사용하여 설치가 간편하며, 차량 도장에 손상을 주지 않습니다.

사양

안정적인 색소 성분을 함유한 유연성 폴리머 소재. 차량 전체 래핑(또는 기타 매끄럽거나 곡면이 있는 표면)에 적합합니다.

  • 필름 두께: 0.14 mm
  • 배경 라이너 두께: 0.13 mm
  • 이형 라이너 두께: 0.03 mm
  • 총 두께(라이너 포함): 0.30 mm
  • 참고: SKU(제품 코드)에 “HD” 문자가 포함된 제품은 플라스틱 이형 라이너가 적용된 제품입니다(고광택 필름).
  • 필름 종류: 에어 릴리스 채널이 있는 프리미엄급 폴리머 다층 하이브리드 비닐 필름
  • 폭 및 길이: 표준 롤 크기 - 1.52m~18m (59.8"~708.6", 4.98ft~59ft, 1.66yd~19.6yd)
  • 시리즈: 190 시리즈

접착제 및 이형지

  • 접착제: 헨켈(Henkel) 용제 기반 아크릴 접착제, 투명, 초내후성, 점도 1000~3000cps, 건조 두께 12 μm

보관

  • 보관 기간(유통 기한): +10°C ~ +20°C, 상대 습도 50%, 직사광선을 피한 깨끗하고 건조한 장소에서 원래 포장 상태로 보관 시 2년

성능

  • 내구성/보증: 데이터시트 (링크 클릭)
  • 적용 온도: +17°C ~ +18°C, 사용 온도: -45°C ~ +45°C
  • 이탈력 (N/25mm): 표준: 0.10-0.30, 결과: 0.17 (23℃, 54%H)
  • 초기 접착력 (g/25mm): 시험 방법: GB31125-2014, 표준 800-1500, 결과: 840 (23℃, 54%H)
  • 180° 박리 강도 (N/25mm): 시험 방법: GB/T2792-1998, 표준 ≥6.8, 결과: 8.7 (23℃, 54%H)
  • 접착 강도: 시험 방법: GB/T4851-1998, 기준 ≥60, 결과 70 (이동 없음)
  • 노화 시험 (65℃, 7일): 표준 - 접착제 잔여물 없이 고온에서 박리 가능, 결과: 접착제 잔여물 없음
  • 노화 (-65℃, 10일): 표준 - 접착제 잔여물 없이 저온에서 박리, 결과: 접착제 잔여물 없음
  • 권장 도포 도구: 스퀴지, 버퍼, 나이프, 마스킹 테이프, 열풍기, 자석, 장갑, 적외선 온도계, 적외선 히터
  • 도포 방법: 캘린더링 필름에 대한 표준 방법. 과도하게 늘리지 마십시오. 후가열
  • 후가열 온도: 100°C
  • 경화 시간: 10°C 이상에서 24시간
  • 사후 관리: pH 중성, 왁스나 용제 사용 금지
  • 방향성: 있음
  • 도구: 완충재가 부착된 부드러운 스퀴지

시공 전 보호 캡을 벗겨내야 합니다.

중요 사항: 화면에 표시된 이미지, 색상 및 마감 처리는 대략적인 것입니다. 제품의 정확한 색상을 확인하려면 항상 색상 견본을 참조하십시오. 배치 간에 약간의 색상 차이가 발생할 수 있으므로, 래핑 작업을 완료할 때는 동일한 생산 LOT 번호의 롤을 사용해야 합니다. 필름은 시공 중이나 일상적인 사용 과정에서 긁힐 수 있습니다. 보증 범위에는 필름의 긁힘은 포함되지 않습니다.

Features

Film construction

  • Film type: premium-grade polymeric multilayered hybrid vinyl with air-release channels
  • Film thickness: 122 μm
  • Release liner thickness: 142 μm plastic
  • Series: 190 Series
  • Roll size: 1.52 m × 18 m (59.8" × 708.6")
  • Material: conformable polymeric vinyl with stable color pigments
  • Adhesive: Henkel solvent-based acrylic adhesive, transparent and ultra weather resistant, 1000 to 3000 cps viscosity, 12 μm dry thickness

Performance

  • Service temperature: -35°C to +35°C
  • Release force: 0.17 N/25mm (standard 0.10 to 0.30)
  • Initial tack: 840 g/25mm (standard 800 to 1500)
  • Peel strength (180°): 8.7 N/25mm (standard ≥ 6.8)
  • Adhesion strength: 70 (standard ≥ 60, no shifting)
  • High temperature aging (65°C, 7 days): no adhesive residue
  • Low temperature aging (-65°C, 10 days): no adhesive residue

Warranty
Built for long-term outdoor use, up to 3 years outdoor durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Heat-removable, with minimal adhesive residue when removed within the recommended three years.

Application

  • Application temperature: +17°C to +23°C
  • Tools: squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer, IR heater
  • Conformability: smooth and medium-curved surfaces
  • Post-heat: 100°C
  • Cure: 24 hrs above 10°C (48 hrs at room temperature recommended)
  • Overlap: 3–4 mm
  • Directional film, check orientation before cutting
  • Avoid overstretching during application
  • Remove protective cap before install
  • Aftercare: pH-neutral products only, avoid waxes and harsh solvents

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of products for their purpose.

TeckWrap products are warranted to be free of defects in material for the period of shelf life. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.

Warranty does not cover normal wear, transportation, labor, or consequential damages.

Screen images may vary, refer to physical color swatches. Use same production LOT for color consistency. Scratches during application or daily use are not covered.