Sku : CG03-HD-18M

아마존 그레이 (CG03-HD) 비닐 랩

(1)
판매 가격 ₩624,000 정가 ₩936,000
해운 결제시 계산.

설명

아마존 그레이 비닐 랩으로 절제된 정교함을 얻으십시오. 이 비닐 랩은 차량에 현대적인 가장자리를 추가하거나 세련된 인테리어 디자인 프로젝트를 완료하든 매번 완벽한 고화질 마감을 제공합니다.

Teckwrap은 차량에 단단하고 반짝이는 마감을 제공하는 새로운 광택 HD 색상을 제공합니다. 재료는 신축성이 뛰어나며 모든 가장자리와 오목한 영역을 빠르게 포장합니다. 접착제는 안전하며 제거 할 때 아무런 문제가 발생하지 않습니다. 필름에는 PET 보호 층이있어 설치 중 긁힘을 피할 수 있습니다 (가열하기 전에 벗겨야합니다). 플라스틱 라이너는 필름의 표면을 더욱 광택 있고 반사적으로 만듭니다. 

명세서

필름 두께 : 110 µm

라이너 두께 릴리스 : 142 µm

영화 유형: 공기 방출이있는 고급 중합체 캘린더 필름.

점착제: 헨켈 용매 기반 아크릴 접착제, 날씨 저항성 및 신뢰성.

릴리스 라이너 : 광택과 반사 표면을위한 플라스틱 라이너.

내구성/보증 : 참조하십시오 자세한 내용은 데이터 시트입니다.

테스트 결과 :

릴리스 힘 (N/25mm) : 표준 : 0.10-0.30 | 결과 : 0.18 (23 ° C, 54%H)

초기 압정 (g/25mm) : 표준 : 800-1500 | 결과 : 1020 (23 ° C, 54%H)

180 ° 껍질 강도 (N/25mm) : 표준 : ≥4.9 | 결과 : 8.3 (23 ° C, 54%H)

접착 강도 : 표준 : ≥60 | 결과 : 72 (이동 없음).

설치 팁 :

온도 범위 : 적용 : +16 ° C ~ +18 ° C | 사용법 : -30 ° C ~ +45 ° C.

필요한 도구 : 소프트 버퍼가있는 표준 스퀴지.

형태 성 : 매끄럽고 중간 정도의 표면.

가열 후 : 최상의 결과를 얻으려면 95 ° C.

겹침 너비 : 3-4 mm.

방향 : 아니요.

보호 계층 : 설치 전에 껍질을 벗기십시오.

중요한 메모 : 

Amazon Grey의 정확한 표현을 위해 색상 견본을 확인하십시오.

일관된 색상으로 동일한 생산 로트의 롤을 사용하십시오.

Amazon Grey CG0vinyl 랩은 프로젝트에 현대적인 우아함을 더합니다. 오늘 주문하고 스타일과 공연의 완벽한 조화를 경험하십시오!

Features

Film construction

  • Film type: Premium polymeric hybrid with air-release channels and Super Gloss HD finish
  • Film thickness: 110 µm
  • Liner thickness: 142 µm plastic (HD high-gloss)
  • Adhesive: Henkel solvent-based acrylic, ultra-weather-resistant, viscosity 1000–3000 cps, 12 µm dry
  • Top layer: PET protective layer (peel before heating)
  • Roll width: 5ft (1,52m)
  • Full roll length: 59ft (18 m)

Performance

  • Service temperature: -35°C to +35°C
  • Release force: 0.18 N/25mm (standard 0.10–0.30)
  • Initial tack: 1015 g/25mm (standard 800–1500, GB31125-2014)
  • Peel strength (180°): 8.1 N/25mm (standard ≥4.9, GB/T2792-1998)
  • Adhesion strength: 70 (standard ≥60, no shifting, GB/T4851-1998)
  • Aging tested: -65°C to +65°C, no residue
  • Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight.

Warranty

  • Built for long-term outdoor use, up to 3 years outdoor durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Heat-removable, with minimal adhesive residue when removed within the recommended three years.

Application

  • Application temperature: +17°C to +23°C
  • Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer, IR heater
  • Conformability: smooth and medium-curved surfaces
  • Post-heat: 95–100°C (gloss finish)
  • Cure: 24 hrs above 10°C (48 hrs at room temperature recommended)
  • Overlap: 3–4 mm
  • Non-directional film
  • Avoid overstretching during application
  • Remove the protective cap before installing
  • Aftercare: pH-neutral products only, avoid hot wax or strong solvents

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of the products for their purpose.


TeckWrap products are warranted to be free of defects in materials for the shelf life period. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.
Warranty does not cover normal wear, transportation, labor, or consequential damages.
Screen images may vary; refer to physical color swatches. Use the same production LOT for color consistency. Film must be stored without the protective layer to prevent tunneling. Scratches during application or daily use are not covered.