SKU: SMT03-5M

Violet veneziano (SMT03) Wrap in vinile

(10)
Prezzo normale €183,95
Imposte incluse Spedizione calcolata al momento del checkout.

Descrizione

Teckwrap Venetian Violet è tenero e delicato. È un involucro per il gentile. Fatti cambiare ora per goderti un'esperienza piacevole.

Specifiche

Materiale polimerico Renolit conforme e affidabile. Adatto per avvolgimento completo (o qualsiasi altra superficie liscia o curva).

Lo spessore del film 0,12 mm
Lo spessore del film con fodera di rilascio: 0,28 mm

Tipo di film: Film in vinile polimerico di alta qualità sensibile alla pressione con canali a rilascio d'aria 

Adesivo: Adesivo acrilico a base di solventi Henkel, trasparente, ultra-stagile, viscosità 1000 ~ 3000 cps, spessore 12 μm asciutto
Rilascio del rivestimento: Felix Schoeller Release Liner / 20-104-20-1,9 Stampato a doppio lato PE Kraft rivestito PE. Un lato rivestito d'aria con rivestimento in silicone senza solventi (ISO 9001, ISO 140001, OHSAS 18001)
Periodo di memorizzazione: 3 anni se immagazzinato in +10 ° с a +20 ° с per qualità ottimale, umidità relativa 50%, nel pacchetto originale, lontano dalla luce solare diretta, in un luogo pulito e asciutto
Durata/garanzia: Scheda dati (Fare clic sul collegamento)
Riscaldamento post: 65 Celcius

Allungamento/pausa MD: 206.8 / CD: 196.4 (Metodo di prova: ASTM D882-02)

Resistenza alla trazione: MD: 29.5/CD: 24,8 N/mm2 - Velocità 200mm/min (Metodo di prova: ASTM D882-02)

Stabilità dimensionale: 2% - forno/10 '*70C (MD) (metodo di prova: ASTM D1204-02)

Tensione superficiale: 34 Dynes/cm (Metodo di prova: ASTM D2578-04A, 24 ore dopo la produzione)

Pacchetto:  Larghezza rotolo di 152 cm, lunghezza 18 m, peso 13 kg

Installa suggerimenti:

Temperatura: da +17 ° -18 ° с, utilizzo da -45 ° с a +45 ° с
Strumenti: Squeegee standard con tampone morbido (bagnato)
Conformabilità: superficie curva liscia e media
Direzionale: sì
Larghezza sovrapposizione: 3-4 mm

Nota importante: Le immagini, i colori e le finiture dello schermo sono approssimative. Per la vera rappresentazione del prodotto, controllare sempre il campione di colore. I rotoli dallo stesso numero di lotto di produzione dovrebbero essere utilizzati per completare un lavoro di avvolgimento, poiché può verificarsi una leggera variazione da parte del colore. Il film può graffiare durante l'applicazione o un giorno dentro e fuori l'uso. La garanzia non copre i graffi del film.

Features

Film construction

  • Film type: Pressure-sensitive high-grade polymeric with air-release channels
  • Film thickness: 0.12 mm (120 µm)
  • Total thickness with liner: 0.28 mm
  • Liner: Double-sided PE-coated Kraft, solventless silicone coating, air-release (ISO 9001, ISO 14001, OHSAS 18001)
  • Adhesive: Henkel solvent-based acrylic, transparent, viscosity 1000–3000 cps, 12 µm dry
  • Finish: Satin metallic, directional
  • Roll width: 5 ft (1,52 m)
  • Full roll length: 59ft (18m)

Performance

  • Service range: -30°C to +30°C
  • Tensile strength: MD 29.5 / CD 24.8 N/mm² (ASTM D882-02)
  • Elongation at break: MD 206.8 / CD 196.4 (ASTM D882-02)
  • Dimensional stability: 2% shrinkage at 70°C (ASTM D1204-02)
  • Surface tension: 34 dynes/cm (ASTM D2578-04a)
  • Storage: 2 years at +10°C to +20°C, 50% RH, dry conditions

Warranty

  • Built for long-term outdoor use, up to 3 years outdoor durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Heat-removable, with minimal adhesive residue when removed within the recommended three years.

Application

  • Apply at +17°C to +23°C
  • Tools: squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer
  • Conformability: smooth and medium-curved surfaces
  • Post-heat: 85°C
  • Cure: 24 hrs above 10°C (48 hrs at room temperature recommended)
  • Overlap: 3–4 mm
  • Directional film, check orientation before cutting
  • Avoid overstretching during application
  • Remove the protective cap before installing
  • Aftercare: pH-neutral products only, avoid waxes and harsh solvents

Disclaimer

  • All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of the products for their purpose.
  • TeckWrap products are warranted to be free of defects in materials for the shelf life period. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.
  • Warranty does not cover normal wear, transportation, labor, or consequential damages.
  • Screen images may vary; refer to physical color swatches. Use the same production LOT for color consistency. Film must be stored without the protective layer to prevent tunneling. Scratches during application or daily use are not covered.