Top Coated True Nardo grey (CG27-SH) Vinyl Wrap

$119.00


Don’t let micro scratches and swirl marks threaten to dull your tailored-made vinyl wrap design. Add extra protection with the TeckWrap CG-SH series, and ride with assurance. The car wrap films in this series are equipped with a cutting-edge self-healing coating to maintain the flawless finish of your vehicle, bringing it to the next level of scratch and stain resistance. No more worry about the wear and tear during your daily driving. Order now and let TeckWrap keep your vinyl wrap film impeccable at all times. 

Specifications

The thickness of the film(um): 110
The thickness of the release liner(um): 142
Type of film: High-grade polymeric calendered film with air release

Adhesive: Henkel solvent-based acrylic adhesive, ultra-weather-resistant, viscosity 1000~3000cps, thickness 12 μm dry
Release liner: Plastic liner
Storing period: 2 years if stored in +10°С to +20°С, relative humidity 50%, in original package, away from direct sunlight, in a clean and dry place. Important: the top protective layer should be removed before installation, and the film should be stored without the protective layer to prevent "tunneling."
Durability/Warranty: Datasheet (Click the link) 

Release force (N/25mm): Standart: 0.10-0.30, Result:0,18 (23℃,54%H)

Initial Tack(g/25mm): Testing method: GB31125-2014: Standart 800-1500, Result: 1015 (23℃,54%H)

180° Peel strength (N/25mm): Testing Method: GB/T2792-1998: Standart ≥4.9, Result: 8,1 (23℃,54%H)

Adhesion strength: Testing method: GB/T4851-1998, Standart ≥60, Result 70 (No shifting)

    Aging (65℃, seven days): Standart - High-temperature release without adhesive residue, result: no adhesive residue

    Aging (-65℃, ten days): Standart - Low-temperature release without adhesive residue, result: no adhesive residue

    Package:  Roll width 152 cm, length 18 or 23m

    Install tips:

    Application: from +16°С to +18°С, usage from -30°С to +45°С
    Tools: Standard squeegee with a soft buffer
    Conformability: smooth and medium curved surface
    Directional: no
    Overlap width: 3-4mm

    Post heating: 95 Celcius 

    The protective cap should be peeled off before installation.

    Important note: The screen's images, colors, and finishes are approximate. For an accurate representation of the product, always check the color swatch. Rolls from the same production LOT number should be used for completing a wrap job, as a slight batch-to-batch variation of color may occur. The film may scratch during the application or a day in and out use. The warranty does not cover the scratching of the film.

    Top Coated True Nardo grey (CG27-SH) Vinyl Wrap

    Customer Reviews

    Based on 2 reviews Write a review

    Attention

    Spliced rolls may be shipped from U.S. and overseas warehouses if full 59ft rolls are unavailable. An additional 2 yards of material is added to offset any potential loss in such cases. The product has an information sticker, and spliced rolls are marked with a sticky tab. All spliced rolls are authentic (of the same batch and color), defect-free, and adhere to strict quality standards.

    How Much Wrap Do I Need?

    Motorcycles 10-16 feet (3-5 meters)
    Mini, small cars 42-45 feet (13-14 meters)
    Convertible 49-52 feet (15-16 meters)
    Coupe 55-59 feet (17-18 meters)
    Sedan 55-59 feet (17-18 meters)
    Hatchback 52-55 feet (16-17 meters)
    Sports Car 52-55 feet (16-17 meters)
    Station Wagon 59-65 feet (18-20 meters)
    Sport-utility Vehicle (SUV) 55-63 feet (17-19 meters)
    Minivan 65-80 feet (20-24 meters)
    Pickup Truck 72-92 feet (22-28 meters)

    Keep in mind that you may need extra material for repairs.
    Therefore we recommend adding 6-9 feet (2-3 meters) to your measurements to avoid additional shipping expenses.

    To achieve a perfect finish

    • We recommend using a tack reducer for flat panels.
    • Installation by at least two people/panel
    • Don't heat up to the line where the film is lifted to prevent adhesive lines.
    • Apply max 50 degrees of heat when stretching to prevent fading and marks.
    • Apply soap and water over the squeegee felt to avoid scratches.
    • Relax the film (heat and let it cool down) before applying it to a recess
    • Apply adhesive promoter on deep recesses
    • Post-heat a vinyl film to a recommended temperature





    Delivery terms

    The order processing time is 24 hours. We ship on working days (Monday-Friday) and provide tracking numbers within 48 hours from the order time.
    The orders are shipped with FedEx, UPS and DHL. The average days to Delivery by Carrier: FedEx International 7-8 days, UPS International 6-8 days, UPS Domestic 2-3 days and DHL 7 days.

    For US and Canada customers - Free domestic shipping is available from local warehouses on full 18-meter (59 ft, 19 yds) rolls. Please reach your sales manager for details.

     

    Important

    The images, colors, and finishes on screen are approximate. For the real representation of the product always check the color swatches. Rolls from the same production LOT number should be used for completing a wrap job as a slight batch to batch variation of color may occur.