SKU: VCH419-M-5M

Satin Serge Blue Vinyl Wrap (VCH419-M)

€227,95
Tax included Shipping calculated at checkout.

Description

Serge Satin Blue spends most of its time looking black. In the garage, in shade, at dusk, it reads as a deep almost-black navy with no obvious color at all. Then light hits it and the blue surfaces from underneath, a cold indigo that lives in the reflections and highlights rather than the body of the panel. The satin holds the metallic down to a low gleam, so the effect is hidden-blue rather than bright-blue. It looks less like a wrap and more like a coachbuilt special-order paint.

If Imperial Satin Blue is the vivid, electric sapphire, Serge is its darker and more discreet twin. Same satin metallic family, but pulled deep into midnight navy and black sapphire, with the purple and the cyan both stripped out. It tracks satin Porsche Midnight Blue most closely, sits in the same world as satin BMW Macao Blue and Volkswagen Windsor Blue, and edges toward Bentley Black Sapphire in the lowest light. Mature, executive, the blue that reads expensive before it reads blue.

It belongs on cars where understatement is the point: a Bentley Continental GT and Flying Spur, a Rolls-Royce Ghost, a Mercedes-Benz S-Class and EQS, a BMW 7 Series and M8, an Audi A8 and RS7, a Porsche Panamera, a Lexus LS, a Genesis G90, a Range Rover Autobiography.

Key attributes:

  • Satin metallic blue, near-black navy base with cold indigo surfacing in light and reflections
  • Premium calendered polymeric vinyl with silver coating and air-release channels
  • Henkel solvent-based acrylic adhesive, transparent, ultra-weather-resistant, removable
  • High-grade release liner lays the film flat for a smoother finish with less orange peel during installation
  • Conformable to medium curves, mirrors, and panel contours
  • Safe removable adhesive, protects factory paint underneath

Features

Film construction

  • Film type: Polymeric hybrid film with silver coating and air-release channels
  • Series: 180 series
  • Film thickness: 128 µm
  • Release liner thickness: 179 µm
  • Liner: Felix Schoeller 20-104-20-1,9, double-sided PE-coated Kraft, one side solventless silicone-coated, air-release (ISO 9001, ISO 14001, OHSAS 18001)
  • Adhesive: Henkel solvent-based acrylic, transparent, ultra-weather-resistant, viscosity 1000–3000 cps, 12 µm dry
  • Finish: satin, directional
  • Roll width: 5 ft (1,52 m)
  • Full roll length: 59ft (18m)

Performance

  • Service range: -35°C to +35°C
  • 180° peel strength: 10.66 N/25mm (standard ≥6.8)
  • Initial tack: 822 g/25mm (standard 800–1500)
  • Release force: 0.1 N/25mm (standard 0.10–0.30)
  • Adhesion: 70, no shifting (standard ≥60)
  • Aging tested +65°C and -65°C: no adhesive residue
  • Storage: 2 years at +10°C to +20°C, 50% RH, in original package, away from direct sunlight

Warranty

  • Built for long-term outdoor use, up to 3 years outdoor durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Heat-removable, with minimal adhesive residue when removed within the recommended three years.
  • Metalized films require careful handling. The appearance of the metalized layer can change with crumpling, overstretching, or excessive heat. The film may scratch during application or daily use. The warranty does not cover the scratching of the film.

Application
  • Apply at +17°C to +23°C
  • Tools: soft squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer, IR heater
  • Conformability: smooth and medium-curved surfaces, avoid overstretching
  • Directional film, check orientation before cutting
  • Overlap: 3–4 mm
  • Post-heat: 95°C
  • Cure time: 24 hours above 15°C; 48 hours at room temperature recommended for maximum adhesive activation
  • Handle the satin chrome surface carefully; it can scratch during installation

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of the products for their purpose.
TeckWrap products are warranted to be free of defects in materials for the shelf life period. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.
Warranty does not cover normal wear, transportation, labor, or consequential damages.
Screen images may vary; refer to physical color swatches. Use the same production LOT for color consistency. Film must be stored without the protective layer to prevent tunneling. Scratches during application or daily use are not covered.

Valuable Advices

View all
  • How To Wrap Taillights

    How To Wrap Taillights

    Wrapping your taillights with a tint PPF is one of the simplest upgrades you can make to give your car a bold, smoky look. This step-by-step guide covers everything, from...

    E. Adnan |

  • Common Mistakes When Applying Color PPF

    Common Mistakes When Applying Color PPF

    Applying color paint protection film (PPF) can be tricky, and mistakes during the installation process can lead to bubbles, creases, and poor adhesion. Learn about the 5 most common color...

    E. Adnan |

  • When to Use Adhesive Promoters and Tack Reducers?

    When to Use Adhesive Promoters and Tack Reducers?

    Installing a car wrap isn’t just about applying vinyl—it requires skill, precision, and the right supporting products. Adhesive promoters help strengthen vinyl grip on tricky edges and curves, while tack...

    Nicki Ammelung |

  • Common Causes of Vinyl Adhesion Failure

    Common Causes of Vinyl Adhesion Failure

    Avoid Car Wrap Lifting & Peeling – Get a Flawless Finish Every TimeDIY vinyl wrapping can be challenging, and adhesion failure is one of the most common issues. From poor...

    Shukhrat Ismatov |

  • Wrapping a Rusty Car: Is It Possible?

    Wrapping a Rusty Car: Is It Possible?

    Car wrapping has exploded in popularity, offering a dynamic way to personalize vehicles. But what happens when the canvas isn't pristine? Can you successfully wrap a car with rust or...

    Phyllis Li |

  • How to Wrap a Car in Winter Time

    How to Wrap a Car in Winter Time

    Wrapping a car in vinyl during winter can be challenging due to cold temperatures, but with the right preparation and tools, you can still achieve a professional finish. Work in...

    Vasile Sayfutdin |