Chrome Cherry Red Vinyl Wrap (CHM04-HD)

Film Construction

• Film Type: Hybrid PVC with silver coating and air-release channels
• Film Thickness: 0.19 mm
• Release Liner Thickness: 0.02 mm
• Backing Liner Thickness: 0.11 mm
• Total Thickness (with liner): 0.32 mm
• Liner: Ultra-micro-grooved PET with air-release channels
• Adhesive: Henkel solvent-based acrylic, transparent, ultra-weather-resistant, viscosity 1000–3000 cps, 12 µm dry
• Finish: Reflective, non-directional for solid colors and directional for neochromes
• Roll Width: 5 ft (1.52 m)
• Full Roll Length: 59 ft (18 m)

Performance

• Service range: -30°C to +30°C
• 180° peel strength: 10.66 N/25mm (standard ≥6.8)
• Initial tack: 822 g/25mm (standard 800–1500)
• Release force: 0.1 N/25mm (standard 0.10–0.30)
• Adhesion: 70, no shifting (standard ≥60)
• Aging tested +65°C and -65°C: minimum adhesive residue
• Storage: 1 year at +10°C to +20°C, 50% RH, in original package, away from direct sunlight

Warranty

• 1-year limited warranty against manufacturing defects. Remove the film within 1 year of installation: cold, without heat, pulling it off quickly at a low angle. Chrome left on longer builds adhesion and can leave adhesive residue or marks in the paint on removal. Full removal and durability terms: TeckWrap Color Change Technical Data Sheet. Scratches, micro-marks, and metalized-layer distortion from overstretching, overheating, or crumpling are characteristic of chrome material and not covered. Use the same production LOT for color consistency across panels.
  

• Apply at +17°C to +23°C
• Standard squeegee with soft buffer
• A steam vacuum or IR heater is recommended for controlled heating
• Conformability: smooth and moderately curved surfaces only
• Limited stretchability, avoid overstretching, crumpling, or aggressive repositioning
• Overheating permanently distorts the metalized layer
• Designed for partial wraps, accents, decals, and detailing
• Not recommended for full vehicle wraps
• Remove the protective cap before installing
• Professional installation strongly recommended
• Removal: within 1 year of installation, cold, without heat, pulling the film off quickly at a low angle.

Chrome and metalized films stretch less than standard color film, and a mirror finish shows every imperfection beneath it. For the best result, especially on full-vehicle wraps, we recommend installers experienced with chrome. Thorough surface prep and controlled heat matter more with chrome than with any other finish. Use rolls from the same production LOT across panels for consistent color.
Color and reflectivity shift with light, viewing angle and surroundings. Screen images may differ from the film, so check a physical swatch before ordering.
TeckWrap chrome and metalized films are warranted to be free of defects in materials for the shelf life period. If a defect is confirmed, TeckWrap will replace the product or issue compensation at its discretion. This is TeckWrap’s sole obligation.
The warranty does not cover labor, transportation, normal wear or consequential damages. It also does not cover characteristics that come from handling rather than the film itself: scratches or micro-marks from installation or daily use, distortion of the metalized layer from overstretching, overheating or creasing, and adhesive residue when the film stays on past the 1-year removal window.
Remove within 1 year of installation. Removal from aged, repainted or poorly bonded paint may lift paint or clear coat, and TeckWrap is not responsible for paint condition on removal.
All TeckWrap statements, technical information and recommendations are based on tests believed to be reliable and do not constitute a guarantee. The buyer is responsible for determining that the product suits their application.