SKU: VCH419-S-18M

Satin Deep Cobalt Vinyl Wrap (VCH419-S)

(3)
$762.00 $1,144.00
Tax included Shipping calculated at checkout.

Description

Deep Cobalt holds its color back. In shadow it sits almost black, a dense navy that gives nothing away, and only under direct light does the cobalt glow surface, with electric blue catching in the reflections. The satin finish is what defines it: instead of a glossy showcar blue, you get an anodized, almost ceramic-coated titanium look, the kind of finish that feels engineered for an aircraft rather than sprayed on for attention.

It's the stealth-executive end of the satin blues. Next to Lapis Blue, which goes loud and electric under city lights, Deep Cobalt stays restrained and only hints at its cobalt under the right angle. And against Serge Satin Blue, its sibling in the 419 family, it carries a touch more visible cobalt glow where Serge holds tighter to near-black. The heritage tracks BMW Tanzanite Blue, Bentley Dark Sapphire, and Porsche Midnight Blue, the dark-navy luxury commissions.

It belongs on executive sedans and luxury SUVs where stealth beats pop: a BMW M5 and 8 Series, a Mercedes-Benz S-Class and EQS, a Porsche Panamera and Cayenne, an Audi A8 and RS6 Avant, a Bentley Flying Spur, a Range Rover Sport, a Genesis G90, a Lucid Air, an Aston Martin Vantage, a Tesla Model S Plaid.

Key attributes:

  • Satin metallic blue, deep navy base with a cobalt glow and electric blue highlights in light
  • Premium polymeric hybrid film with silver coating and air-release channels
  • Henkel solvent-based acrylic adhesive, transparent, ultra-weather-resistant, removable
  • High-grade release liner lays the film flat for a smoother finish with less orange peel during installation
  • Conformable to medium curves, mirrors, and panel contours
  • Safe removable adhesive, protects factory paint underneath

Features

Film construction

  • Film type: Polymeric hybrid film with silver coating and air-release channels
  • Series: 180 series
  • Film thickness: 128 µm
  • Release liner thickness: 179 µm
  • Liner: Felix Schoeller 20-104-20-1,9, double-sided PE-coated Kraft, one side solventless silicone-coated, air-release (ISO 9001, ISO 14001, OHSAS 18001)
  • Adhesive: Henkel solvent-based acrylic, transparent, ultra-weather-resistant, viscosity 1000–3000 cps, 12 µm dry
  • Finish: satin, directional
  • Roll width: 5 ft (1,52 m)
  • Full roll length: 59ft (18m)

Performance

  • Service range: -35°C to +35°C
  • 180° peel strength: 10.66 N/25mm (standard ≥6.8)
  • Initial tack: 822 g/25mm (standard 800–1500)
  • Release force: 0.1 N/25mm (standard 0.10–0.30)
  • Adhesion: 70, no shifting (standard ≥60)
  • Aging tested +65°C and -65°C: no adhesive residue
  • Storage: 2 years at +10°C to +20°C, 50% RH, in original package, away from direct sunlight

Warranty

  • Built for long-term outdoor use, up to 3 years outdoor durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Heat-removable, with minimal adhesive residue when removed within the recommended three years.
  • Metalized films require careful handling. The appearance of the metalized layer can change with crumpling, overstretching, or excessive heat. The film may scratch during application or daily use. The warranty does not cover the scratching of the film.

Application
  • Apply at +17°C to +23°C
  • Tools: soft squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer, IR heater
  • Conformability: smooth and medium-curved surfaces, avoid overstretching
  • Directional film, check orientation before cutting
  • Overlap: 3–4 mm
  • Post-heat: 95°C
  • Cure time: 24 hours above 15°C; 48 hours at room temperature recommended for maximum adhesive activation
  • Handle the satin chrome surface carefully; it can scratch during installation

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of the products for their purpose.
TeckWrap products are warranted to be free of defects in materials for the shelf life period. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.
Warranty does not cover normal wear, transportation, labor, or consequential damages.
Screen images may vary; refer to physical color swatches. Use the same production LOT for color consistency. Film must be stored without the protective layer to prevent tunneling. Scratches during application or daily use are not covered.

Valuable Advices

View all
  • How To Wrap Taillights

    How To Wrap Taillights

    Wrapping your taillights with a tint PPF is one of the simplest upgrades you can make to give your car a bold, smoky look. This step-by-step guide covers everything, from...

    E. Adnan |

  • Common Mistakes When Applying Color PPF

    Common Mistakes When Applying Color PPF

    Applying color paint protection film (PPF) can be tricky, and mistakes during the installation process can lead to bubbles, creases, and poor adhesion. Learn about the 5 most common color...

    E. Adnan |

  • When to Use Adhesive Promoters and Tack Reducers?

    When to Use Adhesive Promoters and Tack Reducers?

    Installing a car wrap isn’t just about applying vinyl—it requires skill, precision, and the right supporting products. Adhesive promoters help strengthen vinyl grip on tricky edges and curves, while tack...

    Nicki Ammelung |

  • Common Causes of Vinyl Adhesion Failure

    Common Causes of Vinyl Adhesion Failure

    Avoid Car Wrap Lifting & Peeling – Get a Flawless Finish Every TimeDIY vinyl wrapping can be challenging, and adhesion failure is one of the most common issues. From poor...

    Shukhrat Ismatov |

  • Wrapping a Rusty Car: Is It Possible?

    Wrapping a Rusty Car: Is It Possible?

    Car wrapping has exploded in popularity, offering a dynamic way to personalize vehicles. But what happens when the canvas isn't pristine? Can you successfully wrap a car with rust or...

    Phyllis Li |

  • How to Wrap a Car in Winter Time

    How to Wrap a Car in Winter Time

    Wrapping a car in vinyl during winter can be challenging due to cold temperatures, but with the right preparation and tools, you can still achieve a professional finish. Work in...

    Vasile Sayfutdin |