SKU: GAL34-HD-5M

Ultra Gloss Silent Purple Vinyl Wrap (GAL34-HD)

(2)
Dhs. 858.00
Shipping calculated at checkout.

Description

The purple that whispers from across the lot and only shows its aggression up close.

Key attributes:

  • Deep gloss metallic violet with strong blue undertones and dominant black reflections
  • Built on a multilayered polymeric hybrid film with aluminum-flake metallic for liquid depth and sharp gloss
  • Transparent Henkel solvent acrylic adhesive, weather-tough and fully removable
  • Premium PET release liner holds the film tension-flat for a flawless mirror gloss, no orange peel
  • Stretches with heat across edges, mirror housings, and moderate recessed areas
  • Removable adhesive lifts cleanly off factory paint, no marks left behind

Silent Purple earns its name. It's a very deep metallic violet with blue running underneath, the kind of purple that reads almost black in the upper reflections and only reveals itself when the light hits it straight on. The flake is extremely fine and liquid rather than sparkly, so it has the depth of modern factory paint instead of an old-school tuner purple. It moves a lot through the day: vivid electric purple in direct front light, dark royal violet down the sides, near-black ink up top, rich metallic grape at sunset, and a cooler bluish purple under cloud. The dominant black reflections are the trick. They're what keep it elegant rather than flashy.

This is the most exotic color in the Galaxy tier, closer to a bespoke hypercar commission paint than to a normal purple wrap. If Candy Purple is the bright, pink-magenta showpiece, Silent Purple is its dark counterpart, deeper and more blue-violet, the one that whispers from across a parking lot and only shows its aggression up close. It suits hard-edged, well-sculpted cars: a BMW M3, M4 or M5, a Porsche 911 GT3, GT2 RS or Taycan, a Nissan Z or GT-R, an Audi RS3, RS5 or RS7, a Lamborghini Huracán or Urus, a McLaren GT, a Mercedes-AMG GT, or a Lexus LC500.

One pairing note: black trim and aero parts ground the brightness and make the metallic depth read even deeper. It's a color that rewards a dark, serious build.

Closest in mood is Bugatti Nocturne Purple, with the same ultra-deep jewel tone and black-violet transitions. McLaren Mauvine Blue MSO is close in daylight, sharing that blue-purple to dark-violet shift, and Lamborghini Viola Pasifae matches the vivid, illuminated areas.

Features

Film construction

  • Film type: Advanced polymeric multilayered film with silver coating and air-release channels
  • Film thickness: 132 μm
  • Liner thickness: 180 μm (plastic high-gloss liner)
  • Adhesive: Henkel solvent polyacrylate, transparent, ultra weather-resistant, viscosity 1000–3000 cps, 12 μm dry
  • Finish: High-Gloss aluminum metallic, directional
  • Roll width: 1.52 m (5 ft)
  • Roll length: 18 m (59 ft)

Performance

  • Service temperature: -35°C to +35°C
  • 180° Peel strength: 9.7 N/25mm (standard ≥7.85)
  • Initial tack: 1055 g/25mm (standard 800–1500)
  • Release force: 0.1 N/25mm (standard 0.10–0.30)
  • Adhesion: 70 (standard ≥60, no shifting)
  • Aging tested: -65°C to +65°C, no residue
  • Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight.

Warranty

  • Built for long-term outdoor use, up to 3 years outdoor durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Heat-removable, with minimal adhesive residue when removed within the recommended three years.

Application
  • Apply at +17°C to +23°C
  • Tools: soft squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer, IR heater
  • Directional film. Orient all panels in the same direction for a consistent metallic flake appearance
  • Conformability: flat, curved, and recessed surfaces (do not overstretch)
  • Post-heat: 100°C flat surfaces, 120°C curves and overlaps
  • Cure time: 24 hours above 15°C; 48 hours at room temperature recommended for maximum adhesive activation
  • A steam vacuum or an IR heater is recommended for installation
  • Remove the protective cap before installing
  • Aftercare: pH-neutral products only, avoid hot wax or strong solvents

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of the products for their purpose.
TeckWrap products are warranted to be free of defects in materials for the shelf life period. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.
Warranty does not cover normal wear, transportation, labor, or consequential damages.
Screen images may vary; refer to physical color swatches. Use the same production LOT for color consistency. Film must be stored without the protective layer to prevent tunneling. Scratches during application or daily use are not covered.

Valuable Advices

View all
  • How To Wrap Taillights

    How To Wrap Taillights

    Wrapping your taillights with a tint PPF is one of the simplest upgrades you can make to give your car a bold, smoky look. This step-by-step guide covers everything, from...

    E. Adnan |

  • Common Mistakes When Applying Color PPF

    Common Mistakes When Applying Color PPF

    Applying color paint protection film (PPF) can be tricky, and mistakes during the installation process can lead to bubbles, creases, and poor adhesion. Learn about the 5 most common color...

    E. Adnan |

  • When to Use Adhesive Promoters and Tack Reducers?

    When to Use Adhesive Promoters and Tack Reducers?

    Installing a car wrap isn’t just about applying vinyl—it requires skill, precision, and the right supporting products. Adhesive promoters help strengthen vinyl grip on tricky edges and curves, while tack...

    Nicki Ammelung |

  • Common Causes of Vinyl Adhesion Failure

    Common Causes of Vinyl Adhesion Failure

    Avoid Car Wrap Lifting & Peeling – Get a Flawless Finish Every TimeDIY vinyl wrapping can be challenging, and adhesion failure is one of the most common issues. From poor...

    Shukhrat Ismatov |

  • Wrapping a Rusty Car: Is It Possible?

    Wrapping a Rusty Car: Is It Possible?

    Car wrapping has exploded in popularity, offering a dynamic way to personalize vehicles. But what happens when the canvas isn't pristine? Can you successfully wrap a car with rust or...

    Phyllis Li |

  • How to Wrap a Car in Winter Time

    How to Wrap a Car in Winter Time

    Wrapping a car in vinyl during winter can be challenging due to cold temperatures, but with the right preparation and tools, you can still achieve a professional finish. Work in...

    Vasile Sayfutdin |