How To Vinyl Wrap A Spoiler
Your spoiler takes the worst of the sun and road debris, and its curves, tight edges, and bolt holes make it the perfect practice piece for vinyl wrapping. This guide...
Installation Articles
How To Vinyl Wrap A Spoiler
-
Vinyl stretching: Do it cold｜TeckWrap
Most vinyl wrap films in the market today have memory effect. At some point, a wrapper aims to eliminate the material’s memory to achieve a perfect finish. But sometimes, you...
-
Wrapping: Level up your vinyl squeegeeing skill｜TeckWrap
As an essential skill for vinyl film wrapping, squeegeeing matters a lot when installing a material. Doing it wrong might damage the film and lead to failure. Here are some...
-
Vinyl wrapping: what you shouldn’t neglect during the process｜TeckWrap
Installing vinyl wrap film is never only about wrapping. Many other things involved during the process are as important as the installation itself because the key to a perfect finish...
-
Vinyl wrapping: bumper with extended area at the bottom｜TeckWrap
Some bumpers have an attached extended area at the bottom, making the wrapping process a little bit complicated. It is ok to wrap the whole area in one piece for...
-
Wrapping sided hood in one piece｜TeckWrap
Usually, a hood is a straightaway piece of cover secured at the front of a vehicle. But some are sided with a one-centimeter-wide area underneath on the left and right....
-
Wrapping rear bumper with extended bottom area｜TeckWrap
Rear bumpers are usually not the most challenging part to wrap with vinyl film. But for some of those with an attachment at the bottom, which creates a recessed corner,...
-
Save vinyl and increase efficiency during pre-production｜TeckWrap
As more and more advanced technologies are applied to the vinyl film industry, the cost of a wrap has been relatively increased. And you certainly want to save as much...
-
Wrapping sided hood with inlay｜TeckWrap
Usually, a hood is a straightaway cover secured on top at the front of a vehicle. But some of them are sided with a one-centimeter-wide area underneath on their left...
-
Achieve tension-free roof corners｜TeckWrap
Corners are always a tricky area to wrap with vinyl. And it can be double tough for corners on a roof. On such a big section like this, one wrong...
-
Handling raised bumper sensor with vinyl｜TeckWrap
Some bumpers are very installer-friendly, while others are not when it comes to car wrapping. There are bumpers with a raised sensor that is challenging to handle. The sensor...
-
Wrapping bumper cover with compound corners｜TeckWrap
When applying a vehicle wrap, wrappers would sometimes come across a bumper with small covers. Some would choose to wrap the main section and the cover separately, so they take...
-
Removal of vinyl embossment｜TeckWrap
Embossing a vinyl wrap film is an excellent way to create a unique head-turning finish. It is nothing complicated to do. (You can check our previous article Handling embossment on...
-
Why it’s important to post-heat｜TeckWrap
Many factors can determine whether a finish is perfect or not, and Post-heating is one of them. But it is also a step that some people would neglect or even...
