Dolomite Silver (RB33-HD) Vinyl Wrap

$119.00


TeckWrap Dolomite Silver is the color of rock, an excellent representation of pure strength. It generates absolute determination. Put it on and keep resolute.

Our Gloss Metallic vinyl wrap has a smooth, high-gloss finish and is crafted from the high-grade polymeric multilayered calendared vinyl film, complete with air release channels. Gloss Metallic wrap is durable and has good conformability; it's stretchable enough to quickly wrap around every edge and recessed area of your vehicle. Gloss Metallic also uses a safe solvent polyacrylate adhesive, easy to install, and is gentle on car paint. 

Specifications 

Conformable polymeric material with stable color pigments. Suitable for complete car wrapping (or any other smooth or curved surface). 

The thickness of the film(um): 122
The thickness of the release liner(um): 142

Note: Products that have "HD" letters in their SKU (product code) are with the plastic release liner (high-gloss films)

Type of film: High-grade polymeric multilayered calendared vinyl film with air-release channels 

Width & Length: Standard roll size - 1.52m*18m (59.8"* 708,6", 4.98ft*59ft, 1.66yd* 19,6yd)

Adhesive: Henkel solvent-based acrylic adhesive, transparent, ultra-weather-resistant, viscosity 1000~3000cps, thickness 12 μm dry
001)

Storing period (shelf life): 2 years if stored at +10°C to +20°C, with a relative humidity of 50%, in the original package, away from direct sunlight, clean and dry place

Durability/Warranty: Datasheet (Click the link)

Application: from +17°C to +18°C, usage from -45°C to +45°C

Release force (N/25mm): Standart: 0.10-0.30, Result:0,17 (23℃,54%H)

Initial Tack(g/25mm): Testing method: GB31125-2014: Standart 800-1500, Result: 840 (23℃,54%H)

180° Peel strength (N/25mm): Testing Method: GB/T2792-1998: Standart ≥6.8, Result: 8,7 (23℃,54%H)

Adhesion strength: Testing method: GB/T4851-1998, Standart ≥60, Result 70 (No shifting)

    Aging (65℃, seven days): Standart - High-temperature release without adhesive residue, result: no adhesive residue

    Aging (-65℃, ten days): Standart - Low-temperature release without adhesive residue, result: no adhesive residue

    Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, IRR heater

    Application method: Standard methods for calendered films. No overstretching. Post heating 

    Post-heating temperature: 100°C

    Cure time: 24 hours above ten °C

    Aftercare: PH neutral. Avoid wax or solvents

    Directional: Yes

    Tools: soft squeegees with buffers

    The protective cap should be peeled off before installation.

    Important note: The screen's images, colors, and finishes are approximate. For an accurate representation of the product, always check the color swatch. Rolls from the same production LOT number should be used for completing a wrap job, as a slight batch-to-batch variation of color may occur. The film may scratch during the application or a day in and out use. The warranty does not cover the scratching of the film.

    Customer Reviews

    Based on 1 review Write a review

    Attention

    Spliced rolls may be shipped from U.S. and overseas warehouses if full 59ft rolls are unavailable. An additional 2 yards of material is added to offset any potential loss in such cases. The product has an information sticker, and spliced rolls are marked with a sticky tab. All spliced rolls are authentic (of the same batch and color), defect-free, and adhere to strict quality standards.

    How Much Wrap Do I Need?

    Motorcycles 10-16 feet (3-5 meters)
    Mini, small cars 42-45 feet (13-14 meters)
    Convertible 49-52 feet (15-16 meters)
    Coupe 55-59 feet (17-18 meters)
    Sedan 55-59 feet (17-18 meters)
    Hatchback 52-55 feet (16-17 meters)
    Sports Car 52-55 feet (16-17 meters)
    Station Wagon 59-65 feet (18-20 meters)
    Sport-utility Vehicle (SUV) 55-63 feet (17-19 meters)
    Minivan 65-80 feet (20-24 meters)
    Pickup Truck 72-92 feet (22-28 meters)

    Keep in mind that you may need extra material for repairs.
    Therefore we recommend adding 6-9 feet (2-3 meters) to your measurements to avoid additional shipping expenses.

    To achieve a perfect finish

    • We recommend using a tack reducer for flat panels.
    • Installation by at least two people/panel
    • Don't heat up to the line where the film is lifted to prevent adhesive lines.
    • Apply max 50 degrees of heat when stretching to prevent fading and marks.
    • Apply soap and water over the squeegee felt to avoid scratches.
    • Relax the film (heat and let it cool down) before applying it to a recess
    • Apply adhesive promoter on deep recesses
    • Post-heat a vinyl film to a recommended temperature





    Delivery terms

    The order processing time is 24 hours. We ship on working days (Monday-Friday) and provide tracking numbers within 48 hours from the order time.
    The orders are shipped with FedEx, UPS and DHL. The average days to Delivery by Carrier: FedEx International 7-8 days, UPS International 6-8 days, UPS Domestic 2-3 days and DHL 7 days.

    For US and Canada customers - Free domestic shipping is available from local warehouses on full 18-meter (59 ft, 19 yds) rolls. Please reach your sales manager for details.

     

    Important

    The images, colors, and finishes on screen are approximate. For the real representation of the product always check the color swatches. Rolls from the same production LOT number should be used for completing a wrap job as a slight batch to batch variation of color may occur.