TeckWrap Fortis20 Metalized Window Tint Film (M20-2mil)

Film construction
Film type: Magnetron sputtering automotive window film
Series: Fortis
Thickness: 2 mil
Roll size: 1.52 m × 30 m
Application: Rear side windows and rear windshield (subject to local laws)
Directional: Yes
Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight

Optical performance
Visible Light Transmission (VLT): 15 ± 2%
Internal Visible Light Reflectance: 6%
External Visible Light Reflectance: 6%
Infrared Transmittance (IR): 55 ± 2% (45% rejection)
Ultraviolet Rejection (UVR): over 99%
Total Solar Energy Rejected (TSER): 52 ± 2%

Durability
2 mil construction adds shatter resistance to the glass
Metal layers deposited under vacuum for long-term optical and colour stability
Scratch-resistant hard coat on the exposed surface
Dimensionally stable across the service temperature range
Colour stable, does not fade to purple with age

Warranty
8-year TeckWrap limited warranty against bubbling, peeling, cracking, delamination and excessive colour change.

Professional installation strongly recommended
Apply at +17°C to +23°C in a dust-free environment
Service temperature range: -45°C to +45°C
Wet application with slip and tack solutions
Tools: squeegee with soft buffer, hard card, heat gun, knife, masking tape, microfiber cloth, gloves, IR thermometer
Conformability: smooth and medium-curved glass
Directional film, check orientation before cutting
Overlap 3 to 4 mm where panels meet
Post-heat to set the adhesive once the film is squeegeed out
Remove the protective cap before installation
Contains metal layers, check compatibility with glass-mounted antennas, toll transponders and older radio aerials
Allow 7 to 14 days to cure before rolling the windows down
Do not clean the film for 7 days after installation
After cure, clean with an ammonia-free glass cleaner and a soft microfiber cloth only
Verify local window tint laws before installation. At 15% VLT this film is darker than most regions permit on front side windows and the windshield. Fit to rear glass only unless local law allows otherwise.

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of products for their purpose.

TeckWrap products are warranted to be free of defects in material for the period of shelf life. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.

Warranty does not cover normal wear, transportation, labor, consequential damages, improper installation, scratches from abrasive cleaning, or physical impact damage.

Local laws regarding automotive window tint vary significantly by region and may restrict VLT percentages on certain windows. 15% VLT is darker than most regions permit for front side windows and windshields. Buyer is responsible for ensuring legal compliance. Screen images may vary, refer to physical samples. Use same production LOT for consistency across windows.