SKU: VCH402-S-5M

Satin Velvet Blue Vinyl Wrap (VCH402-S)

(9)
€231,95
Tax included Shipping calculated at checkout.

Description

Most bright satin blues can't commit to one shade, purple under indoor light, cyan in full sun, teal in the shadows. Velvet Blue doesn't drift. It holds a true royal cobalt in every light, from a garage to full midday sun.

Key Attributes

  • Color that holds its line: stays a saturated royal cobalt across shade, overcast, and direct sun, with no slide toward purple or teal
  • Satin-over-metalized base: a fine silver coating beneath the color gives the blue real depth and a soft metallic glow, without going full mirror
  • Clean chemistry: Henkel solvent-based acrylic adhesive, transparent and weather-resistant, removes residue-free
  • Smooth lay-down: high-grade release liner keeps the film tension-flat, reducing orange-peel texture during install
  • Heat-conformable: wraps around mirrors, bumpers, and moderate curves
  • Paint-safe: removable adhesive protects the factory finish underneath

In the shade, Velvet Blue settles into a deep, almost frozen cobalt with a quiet metallic glow underneath. Move it into direct sun and the same panel lifts into a vivid, electric blue without ever tipping into purple or washing out to cyan. Because the color sits over a thin silver base rather than a flat pigment layer, it holds a consistency other bright blues lose the moment the light changes, closer to a factory performance-car blue than a typical aftermarket wrap color.

OEM Match

  • Closest to BMW Individual Velvet Blue
  • Same performance-blue family as Audi Ara Blue and Porsche Shark Blue
  • More saturated than Jaguar Velocity Blue
  • Deeper than a standard aftermarket cobalt blue

That factory performance-blue look that Audi, Porsche, and BMW save for their hottest trims now fits a WRX, Civic Type R, Golf GTI, or GR Supra just as easily as an RS3, 911, or M3.

Features

Film Construction

  • Film Type: Polymeric hybrid film with silver coating and air-release channels
  • Series: 180 series
  • Film Thickness: 0.14 mm
  • Backing Liner Thickness: 0.14 mm
  • Total Thickness (with liner): 0.28 mm
  • Liner: Felix Schoeller 20-104-20-1,9, double-sided PE-coated Kraft, one side solventless silicone-coated, air-release (ISO 9001, ISO 14001, OHSAS 18001)
  • Adhesive: Henkel solvent-based acrylic, transparent, ultra-weather-resistant, viscosity 1000–3000 cps, 12 µm dry
  • Finish: Satin, directional
  • Roll Width: 5 ft (1.52 m)
  • Full Roll Length: 59 ft (18 m)

Performance

  • Service range: -35°C to +35°C
  • 180° peel strength: 10.66 N/25mm (standard ≥6.8)
  • Initial tack: 822 g/25mm (standard 800–1500)
  • Release force: 0.1 N/25mm (standard 0.10–0.30)
  • Adhesion: 70, no shifting (standard ≥60)
  • Aging tested +65°C and -65°C: no adhesive residue
  • Storage: 2 years at +10°C to +20°C, 50% RH, in original package, away from direct sunlight

Warranty

  • Built for long-term outdoor use, up to 3 years outdoor durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Heat-removable, with minimal adhesive residue when removed within the recommended three years.
  • Metalized films require careful handling. The appearance of the metalized layer can change with crumpling, overstretching, or excessive heat. The film may scratch during application or daily use. The warranty does not cover the scratching of the film.

Application
  • Apply at +17°C to +23°C
  • Tools: soft squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer, IR heater
  • Conformability: smooth and medium-curved surfaces, avoid overstretching
  • Directional film, check orientation before cutting
  • Overlap: 3–4 mm
  • Post-heat: 95°C
  • Cure time: 24 hours above 15°C; 48 hours at room temperature recommended for maximum adhesive activation
  • Handle the satin chrome surface carefully; it can scratch during installation

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of the products for their purpose.
TeckWrap products are warranted to be free of defects in materials for the shelf life period. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.
Warranty does not cover normal wear, transportation, labor, or consequential damages.
Screen images may vary; refer to physical color swatches. Use the same production LOT for color consistency. Film must be stored without the protective layer to prevent tunneling. Scratches during application or daily use are not covered.

Valuable Advices

View all
  • DIY vs. Professional Window Tint Installation

    DIY vs. Professional Window Tint Installation

    Nothing changes a vehicle's personality quite like a dark smoky tint. But it can be expensive forcing you to choose between DIY installation and hiring a professional? DIY window tinting...

    E. Adnan |

  • How To Wrap Taillights

    How To Wrap Taillights

    Wrapping your taillights with a tint PPF is one of the simplest upgrades you can make to give your car a bold, smoky look. This step-by-step guide covers everything, from...

    E. Adnan |

  • Common Mistakes When Applying Color PPF

    Common Mistakes When Applying Color PPF

    Applying color paint protection film (PPF) can be tricky, and mistakes during the installation process can lead to bubbles, creases, and poor adhesion. Learn about the 5 most common color...

    E. Adnan |

  • When to Use Adhesive Promoters and Tack Reducers?

    When to Use Adhesive Promoters and Tack Reducers?

    Installing a car wrap isn’t just about applying vinyl—it requires skill, precision, and the right supporting products. Adhesive promoters help strengthen vinyl grip on tricky edges and curves, while tack...

    Nicki Ammelung |

  • Common Causes of Vinyl Adhesion Failure

    Common Causes of Vinyl Adhesion Failure

    Avoid Car Wrap Lifting & Peeling – Get a Flawless Finish Every TimeDIY vinyl wrapping can be challenging, and adhesion failure is one of the most common issues. From poor...

    Shukhrat Ismatov |

  • Wrapping a Rusty Car: Is It Possible?

    Wrapping a Rusty Car: Is It Possible?

    Car wrapping has exploded in popularity, offering a dynamic way to personalize vehicles. But what happens when the canvas isn't pristine? Can you successfully wrap a car with rust or...

    Phyllis Li |

  • How to Wrap a Car in Winter Time

    How to Wrap a Car in Winter Time

    Wrapping a car in vinyl during winter can be challenging due to cold temperatures, but with the right preparation and tools, you can still achieve a professional finish. Work in...

    Vasile Sayfutdin |