Common Mistakes When Applying Color PPF
You have just invested in a premium dry-install color PPF and are excited to apply it to your car, hoping for a clean, perfect finish. Yet the process is more...
Installation Articles
Common Mistakes When Applying Color PPF
-
What deep recessed area can tell you | TeckWrap
Deep recessed areas are challenging to wrap with vinyl film, and a vehicle wrap tends to build up tension in those spots. And if you do not approach properly, the...
-
Front door wrapping with mirror on | TeckWrap
When wrapping a section with tricky recessed areas, the best way might be to remove any hardware that will create great tension on the vinyl wrap film and block you...
-
Tackle flat bumper sensor | TeckWrap
A flat bumper sensor is not too tricky to wrap with vinyl wrap film, and the only thing that makes it challenging to handle is the soft molding around itself,...
-
Fixing lifting vinyl film on mirror | TeckWrap
Most mirrors have a severe compound curve, which creates massive tension when wrapping with vinyl film. And the material on the edge will lift or peel over time if you...
-
Full print film: All-in-one guideline | TeckWrap
For personalization, branding, or commercials, a full print wrap film is undoubtedly an excellent choice, impactful media to express for individuals, and a powerful billboard for the business. But...
-
Tesla wrapping: Perfect front door | TeckWrap
A Tesla front door is nothing tricky to wrap. But still, proper skills are needed. Here is a demonstration of wrapping this section of a Model 3: Thorough cleaning...
-
Textured vinyl film: One-piece mirror | TeckWrap
A mirror is usually tricky to wrap. And textured film can be challenging to handle. Thus, when wrapping a mirror with textured material like carbon, you will need the right...
-
Stress-free corner wrapping: Take advantage of vinyl memory effect
A corner is always one of the most challenging spots to do car wrapping. But with the right approach and some tricks, you can quickly achieve a tension-free, high-quality wrapped...
-
Wrapping with pre-cut vinyl film | TeckWrap
Cutting material such as craft vinyl film is a must-have for personalizing your vehicle or branding for a business purpose. It is also a good choice when you feel like...
-
Car wrapping: Maintain heat gun in good shape | TeckWrap
Many car wrap installers might have experienced that scraps of the vinyl film end up getting to the tip of your heat gun. This is something you should deal with,...
-
Key fact about gloss car wrap | TeckWrap
A gloss car wrap is not that difficult to wrap with, and this is because of its easy-going properties. Here are some key facts about it. Let’s check out how...
-
Vinyl Cutting: What you should pay attention | TeckWrap
Cutting is an essential skill for every wrapper installing vinyl film. A clean cut can distinguish a perfect finish from other wrap jobs. Yet a bad cut can ruin your...
-
Car wrapping: Eliminating impression on roll | TeckWrap
Often, for a color-change or full print car wrap roll, there will be impressions like scratches or stripes on its surface, whether it is gloss or matte vinyl. This might...
