SKU: GAL31-HD-5M

Deep Gloss Atomic Silver Vinyl Wrap (GAL31-HD)

(2)
658.00 NIS
Tax included Shipping calculated at checkout.

Description

Atomic Silver is a bright, clean metallic silver with a mirror-like gloss and no orange peel. The multilayered construction with its silver coating gives it real metallic depth, the kind a flat silver can't reach. It's a versatile, high-presence finish rather than a color-shift showpiece: it stays brilliant silver across most light, lifting toward near-white in direct sun and settling to a softer pewter-silver in shade. The film stretches cleanly around mirrors, bumpers, and recessed panels, and the Henkel solvent polyacrylate adhesive bonds securely and removes clean.

It's one of the most flexible colors in the lineup, equally at home as a full color change, a hood or roof contrast, an accent panel, or a fleet rebrand. Bright metallic silver suits almost anything but looks especially sharp on modern performance and luxury cars: Tesla, Mercedes-AMG, BMW M-Series, Audi RS, Porsche, or Aston Martin.

Key attributes:

  • High-Gloss aluminum vinyl wrap, brilliant metallic silver
  • Advanced polymeric multilayered film with silver coating and air-release channels
  • Henkel solvent polyacrylate adhesive, transparent, ultra-weather-resistant, removable
  • Plastic (high-gloss) release liner for sharper gloss and reflectivity
  • Conformable and stretchable to edges and recessed areas
  • Safe removable adhesive, protects factory paint underneath

Features

Film construction

  • Film type: Advanced polymeric multilayered film with silver coating and air-release channels
  • Film thickness: 132 μm
  • Liner thickness: 180 μm (plastic high-gloss liner)
  • Adhesive: Henkel solvent polyacrylate, transparent, ultra-weather-resistant, viscosity 1000–3000 cps, 12 μm dry
  • Finish: High-Gloss aluminum metallic, directional
  • Roll width: 1.52 m (5 ft)
  • Roll length: 18 m (59 ft)

Performance

  • 180° Peel strength: 9.7 N/25mm (standard ≥7.85)
  • Initial tack: 1055 g/25mm (standard 800–1500)
  • Release force: 0.1 N/25mm (standard 0.10–0.30)
  • Adhesion: 70 (standard ≥60, no shifting)
  • Aging tested: -65°C to +65°C, no residue
  • Cure time: 24 hours above 15°C; 48 hours at room temperature recommended for maximum adhesive activation

Application
  • Apply at +17°C to +23°C
  • Service range: -45°C to +45°C
  • Directional film — orient all panels the same direction for consistent metallic flake appearance
  • Soft squeegee with buffer
  • Conformability: flat, curved, and recessed surfaces (stretchable, do not overstretch)
  • Post-heat: 100°C flat surfaces, 120°C curves and overlaps
  • Steam vacuum or IR heater recommended for installation
  • Remove protective cap before install
  • Aftercare: pH-neutral products only, avoid hot wax or strong solvents

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of products for their purpose.

TeckWrap products are warranted to be free of defects in material for the period of shelf life. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.

Warranty does not cover normal wear, transportation, labor, or consequential damages.

Screen images may vary, refer to physical color swatches. Use same production LOT for color consistency. Scratches during application or daily use are not covered.

Valuable Advices

View all
  • How To Wrap Taillights

    How To Wrap Taillights

    Wrapping your taillights with a tint PPF is one of the simplest upgrades you can make to give your car a bold, smoky look. This step-by-step guide covers everything, from...

    E. Adnan |

  • Common Mistakes When Applying Color PPF

    Common Mistakes When Applying Color PPF

    Applying color paint protection film (PPF) can be tricky, and mistakes during the installation process can lead to bubbles, creases, and poor adhesion. Learn about the 5 most common color...

    E. Adnan |

  • When to Use Adhesive Promoters and Tack Reducers?

    When to Use Adhesive Promoters and Tack Reducers?

    Installing a car wrap isn’t just about applying vinyl—it requires skill, precision, and the right supporting products. Adhesive promoters help strengthen vinyl grip on tricky edges and curves, while tack...

    Nicki Ammelung |

  • Common Causes of Vinyl Adhesion Failure

    Common Causes of Vinyl Adhesion Failure

    Avoid Car Wrap Lifting & Peeling – Get a Flawless Finish Every TimeDIY vinyl wrapping can be challenging, and adhesion failure is one of the most common issues. From poor...

    Shukhrat Ismatov |

  • Wrapping a Rusty Car: Is It Possible?

    Wrapping a Rusty Car: Is It Possible?

    Car wrapping has exploded in popularity, offering a dynamic way to personalize vehicles. But what happens when the canvas isn't pristine? Can you successfully wrap a car with rust or...

    Phyllis Li |

  • How to Wrap a Car in Winter Time

    How to Wrap a Car in Winter Time

    Wrapping a car in vinyl during winter can be challenging due to cold temperatures, but with the right preparation and tools, you can still achieve a professional finish. Work in...

    Vasile Sayfutdin |